• Journal of Electrical Engineering and Technology
• /
• v.7 no.1
• /
• pp.64-68
• /
• 2012

In this paper, a design method for minimizing the cogging torque of an Interior Permanent Magnet Motor (IPM) is proposed based on a hybrid algorithm. The suggested optimization algorithm is based on a combination of the Response Surface Method (RSM) and Simplex Method. The results show that the proposed method provides improved characteristics compared to the conventional methods, such as a shorter calculation time and the acquisition of a more correct solution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.539-546
• /
• 1997

In this paper, we proposed a new mehtod to analyze the performance degradation by timing jitters in the APD (avalanche photodiode) receivers of intensity modulation/direct detection digital optical communication systems where raised cosine pulse-shaping filters are used to reduce the effect of noise while minimizing intersymbol interferences. The proposed analytical method is an extension of an analytical method we have already developed for pin diode receivers, and incorporates the effects of APD's multiplication factor and resulting shot noise. Using the proposed analytical method, we derive an approximated power penalty due to timing jitters based on an assumption of Gaussian distribution for timing jitters, and compare with that of the conventional analytical method. The results obtained from the proposed analytical method show that conventional analytical methods underestimate the influence of timing jitters on the reciver performance. The results also show that APD's multiplication factor which optimizes receiver sensitivity is smaller than that obtained by the conventional analytical method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.856-865
• /
• 2015

In a high-speed press, numerous moving links are interconnected and each link executes a constrained motion at high speed. As a consequence, high-level dynamic unbalance force and unbalance moment are transmitted to the main frame of the press, which results in unwanted vibration and significantly degrades manufacturing accuracy. Dynamic unbalance force and unbalance moment inevitably transmits high-level vibrational force to the foundation on which the press is installed. Minimizing the vibrational force transmitted to the foundation is critical for the protection of both the operators and the surrounding structures. The whole task should be carried out in two steps. The first step is to reduce dynamic unbalance based upon kinematic and dynamic analyses. The second step is to design and build an optimal vibration isolation system minimizing the vibrational force transmitted to the foundation. Firstly, the dynamic design method is presented to reduce dynamic unbalance force and moment. For this a 3D CAD software was utilized and a computer program was written to compute dynamic unbalance force and moment. Secondly, the design method for vibration isolation system is presented. The method for designing coil springs and viscous dampers are explained in detail.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.19-28
• /
• 2017

Recently the cargo transportation is increasing according to lager containerships in the container terminal. Thus, the various ways(such as efficient vehicle scheduling and minimizing delay time) are applied to increase productivity to handle the increasing cargo transportation in the container terminal. In this paper, the optimized model(Solvers) is applied to improve the existing heuristic method as a way of increasing productivity. The experimental design is that the result of two objective functions(minimizing travel and delay time of the empty vehicle) is compared to the result of the existing heuristic method by six sample problems. As a result of the two objective function experiments, the optimized model draws 5.3% more improved performance than the heuristic method in four of six problem samples.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.201-208
• /
• 2020

Recently, the application of personal proofing service based on social security number(SSN) replacement means for verifying identity in non-face-to-face transactions is increasing. In this paper, we propose a method of applying differentiated personal proofing service on whether identity verification is necessary in the online service provided by ISP and if it is appropriate to apply a certain level of assurance. By analyzing the requirements related to personal proofing required by current ISPs, we analyze the risks for each of the requirements and propose a method of applying differentiated personal proofing service according to the level of identity assurance guarantee to minimize the risks. In applying the proposed method to online service provision, it is possible to reduce user's unnecessary authentication cost by minimizing the application of personal proofing service based on alternative means, and to help protect user personal information by minimizing excessively collected personal information.

• Journal of Korea Game Society
• /
• v.17 no.4
• /
• pp.137-148
• /
• 2017

Since the power consumption of data centers is large and computer serves take a large portion of it, there have been much research on the power saving of servers in various ways recently. Among the units of severs CPU is one of major power consuming units. In this paper, a method of client-server assignment for minimizing the CPU power consumption of servers in a game server cluster is proposed. We model the client-server assignment problem as an optimization problem, and find a solution to the problem using a simulated annealing-based technique. One of major features of our method is to select a proper operating frequency according to the amount of load on a server. The selection of a lower frequency in case of low load will result in reducing power consumption. To our survey, little research on client-server assignment in consideration of power consumption has been carried out.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2016

This study focuses on the air to air missile control fin planform optimization for the minimizing hinge moment with the considering phenomena of fluid and structure simultaneously. The fluid-structure interaction method is applied for the fluid and structure phenomena simulation of the control fins. A transient-loosely coupled method is used for the fluid-structure interaction simulation because it is suited for using each fluid and structure dedicated simulation software. Searching global optimization point is required many re-calculation therefore in this study, a mathematical model is applied for rapidly calculation. The face centered central composite method is used for generating design points and the 2nd polynomial response surface is sued for generating mathematical model. Global optimization is performed by using the generic algorithm. An objective function is the minimizing travel distance of the center of pressure between Mach 0.7 and 2.0 condition. Finally, the objective function of optimized planform is reduced 7.5% than the baseline planform with satisfying constrained conditions.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.103-112
• /
• 2018

High-rise mixed-use buildings are consisted of various facilities and circulations. Since various facilities and circulations are planned in a single site, circulation planning should be established after identifying the exact characteristics of facility and circulation. To this end, the components of the circulation planning in accordance with the formation of facility types are analyzed through the survey of experts based on Delphi Method. To identify the characteristics of the mixed-use buildings, by figuring out how the elements of circulation planning which are sought to be important by the planner has been reflected through analysis of the correlation between two sections. Researching on the circulation between two sections through Delphi Method and reflected circulation planning, it reaches the conclusion that the circulation of planning on the subject building is applied following the importance. In other words, the components of circulation planning which were sought to be important by the planner are reflected significantly when they planned the circulation planning on that mixed-use buildings. However, in case of design on the outdoor vehicle circulation, minimizing on the vehicle circulation at the 1st floor is not applied for the majority of the subject buildings different from the importance. In early 2000, high end residential buildings designed for mixed-use building have been specialized at vehicle-centered outdoor space and hotel style drop-off. Contrastively, sizable outdoor space at the 1st floor is designed to open to the residents and the local by minimizing the vehicle circulation in recent. Finally it shows that the way of circulation planning has been changed in accordance with time and trend.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3201-3207
• /
• 2011

This paper reviewed wave propagation of train vibration based on the study of high speed railway soft ground section with pile slab construction. In a filed of railway, concrete track has been adapted in a railway construction. And in order to maintain its track, soil improving method was required to control residual settlement. Within many soft ground settlement prevention techniques, pile slab method has an effect of minimizing residual settlement of soft ground. This is possible using support embankment load method by construct pile slab or cap the upper soft ground. This paper reviewed vibration wave characteristic of soft ground section with pile slab using numerical analysis application through finite element analysis. Pile slab method is established between high stiffened soft ground and embankment this creates a possibility of vibration block or slab amplification. Thus analyzed of wave propagation was done with roadbed and structure property to confirm application performance of pile slab method of high speed railway structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1210-1216
• /
• 2003

Topology optimization is applied to determine the layout of a structural component with a specified frequency by minimizing the difference between the specified structural frequency and a given frequency. The homogenization design method is employed and the topology design problem is solved by the optimality criteria method. The value of a weighting factor in the optimality criteria plays an important role in this topology design problem. The modified optimality criteria method approximated by using the binomial expansion is suggested to determine the suitable value of the weighting factor, which makes convergence stable. If a given frequency is set as an excited frequency, it is possible to avoid resonance by moving away the specified structural frequency from the given frequency. The results of several test problems are compared with previous works and show the validity of the proposed algorithm.