• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.170-177
• /
• 2014

This study was conducted to know the behavior of pH behavior in the tomato juices to find out an effective medium for microbial cultivation. Bacterial culture media is a material consist a mixture of nutrients used to grow microorganisms on or in it. In addition, microbial culture media can also be used for isolation, propagation, testing the nature physiological, and calculation of the number of microorganisms. Fresh tomato juice is used for basic ingredient, therein added salt, sugar and EM (Effective Microbial). The fermented solution placed in a room with a temperature of 40oC. Data retrieval before the pH value reached a constant value is done every 12 hours, after constant rate data collection was done every 24 hours. The pH value has been steady after 372 hours of fermentation process (15.5 days). From the results obtained that the amount of additional ingredient which added into tomato juice does not affect final pH value of solution. Thereby the most effective treatment for microbial cultivation media is treatment number four.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.113-120
• /
• 2010

Air-cathode microbial fuel cell consisted of 4 unit cells were operated under batch condition and electricity generation and microbial community structure variation were investigated, depending on separator types and cathode characteristics: A) PEM(Proton Exchange Membrane)-30% Wet proofing Carbon Cloth(WC), B) AEM(Anion Exchange Membrane-WC, C) CEM(Cation Exchange Membrane)-WC, D) PEM-No Wet proofing Carbon Cloth(NC). Maximum power densities of PEM-WC, AEM-WC and CEM-WC were 510.9, 522.1 and 504.8 $mW/m^2$, respectively. But PEM-NC showed relatively lower maximum power density of 218.3 $mW/m^2$. And PEM-WC, AEM-WC and CEM-WC showed similar internal resistances(20.0-28.2 ${\Omega}$). PCRDGGE, PCA and diversity indices showed that uncultured bacteria which reported in previous MFC studies were detected in suspended growth bacteria and attached growth bacteria would be affected not by separator type but by cathode characteristic. Thus, cathode characteristic can be one of the critical factors for power generation in air-cathode MFC using PEM, AEM, and CEM as separator.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2000.11a
• /
• pp.127-130
• /
• 2000

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.58-67
• /
• 2020

Microbial electrosynthesis has recently been considered a potentially sustainable biotechnology for converting carbon dioxide (CO₂) into valuable biochemicals. In this study, bioelectrochemical acetate production from CO₂ was studied in an H-type two-chambered reactor system with an anaerobic microbial consortium. Metal-rich mud flat was used as the inoculum and incubated electrochemically for 90 days under a cathode potential of -1.1 V (vs. Ag/AgCl). Four consecutive batch cultivations resulted in a high acetate concentration and productivity of 93 mmol/L and 7.35 mmol/L/day, respectively. The maximal coulombic efficiency (rate of recovered acetate from supplied electrons) was estimated to be 64%. Cyclic voltammetry showed a characteristic reduction peak at -0.2~-0.4 V, implying reductive acetate generation on the cathode electrode. Furthermore, several electroactive acetate-producing microorganisms were identified based on denaturing- gradient-gel-electrophoresis (DGGE) and 16S rRNA sequence analyses. These results suggest that the mud flat can be used effectively as a microbial source for bioelectrochemical CO₂ conversion.

• Journal of Soil and Groundwater Environment
• /
• v.24 no.4
• /
• pp.1-10
• /
• 2019

Recently, groundwater contamination by mixed occurrence of arsenic (As) and nitrate ($NO_3{^-}$) has been a serious environmental issue all around world. In this study, we investigated the microbial As(III) oxidation characteristic under denitrification process to examine the feasibility of the microbial consortia in wetland sediment to simultaneously treat these two contaminants. The detail objectives of this study were to investigate the effects of $NO_3{^-}$ on the oxidation of As(III) in anaerobic environments and observe the microbial community change during the As oxidation under denitrification process. Results showed that the As(III) was completely and simultaneously oxidized to As(V) under denitrification process, however, it occurred to a much less extent in the absence of sediment or $NO_3{^-}$. In addition, the significant increase of As(III) oxidation rate in the presence of $NO_3{^-}$ suggested the potential of As oxidation under denitrification by indigenous microorganisms in wetland sediment. Genera Pseudogulbenkiania, and Flavisolibacter were identified as predominant microbial species driving the redox process. Conclusively, this study can provide useful information on As(III) oxidation under denitrifying environment and contribute to develop an effective technology for simultaneous removal of As(III) and $NO_3{^-}$ in groundwater.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.84-94
• /
• 2024

Objective: The objective of this study was to investigate how cellulase or/and lactic acid bacteria (LAB) affected the fermentation characteristic and microbial community in wet brewer's grains (WBG) and corn stover (CS) mixed silage. Methods: The WBG was mixed thoroughly with the CS at 7:3 (w/w). Four treatment groups were studied: i) CON, no additives; ii) CEL, added cellulase (120 U/g fresh matter [FM]), iii) LAB, added LAB (2×10⁶ cfu/g FM), and iv) CLA, added cellulase (120 U/g FM) and LAB (2×10⁶ cfu/g FM). Results: All additive-treated groups showed higher fermentation quality over the 30 d ensiling period. As these groups exhibited higher (p<0.05) LAB counts and lactic acid (LA) content, along with lower pH value and ammonia-nitrogen (NH₃-N) content than the control. Specifically, cellulase-treated groups (CEL and CLA) showed lower (p<0.05) neutral detergent fiber and acid detergent fiber contents than other groups. All additives increased the abundance of beneficial bacteria (Firmicutes, Lactiplantibacillus, and Limosilactobacillus) while they decreased abundance of Proteobacteria and microbial diversity as well. Conclusion: The combined application of cellulase and LAB could effectively improve the fermentation quality and microbial community of the WBG and CS mixed silage.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.1
• /
• pp.110-119
• /
• 2016

High-solid anaerobic digestion of sewage sludge achieves highly efficient volatile solid reduction, and production of volatile fatty acid (VFA) and methane compared with conventional low-solid anaerobic digestion. In this study, the potential mechanisms of the better performance in high-solid anaerobic digestion of sewage sludge were investigated by using 454 high-throughput pyrosequencing and real-time PCR to analyze the microbial characteristics in sewage sludge fermentation reactors. The results obtained by 454 highthroughput pyrosequencing revealed that the phyla Chloroflexi, Bacteroidetes, and Firmicutes were the dominant functional microorganisms in high-solid and low-solid anaerobic systems. Meanwhile, the real-time PCR assays showed that high-solid anaerobic digestion significantly increased the number of total bacteria, which enhanced the hydrolysis and acidification of sewage sludge. Further study indicated that the number of total archaea (dominated by Methanosarcina) in a high-solid anaerobic fermentation reactor was also higher than that in a low-solid reactor, resulting in higher VFA consumption and methane production. Hence, the increased key bacteria and methanogenic archaea involved in sewage sludge hydrolysis, acidification, and methanogenesis resulted in the better performance of high-solid anaerobic sewage sludge fermentation.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.1
• /
• pp.57-63
• /
• 2003

Using fungal (Fusarium solani f. pisi) and bacterial (Pseudomonas mendocina) cutinases, the initial hydrolysis rate of p-nitrophenyl esters was systematically estimated for a wide range of enzyme and substrate concentrations using a 96-well microplate reader. Both cutinases exhibited a high substrate specificity; i.e. a high hydrolytic activity on p-nitrophenyl butyrate (PNB), yet extremely low activity on p-nitrophenyl palmitate (PNP). When compared to the hydrolysis of PNB and PNP by other hydrolases [lipases and esterases derived from different microbial sources, such as bacteria (Pseudomonas cepacia, Psedomonas furescens, Baciilus stearothermophilus), molds (Aspeillus niger, mucor miehei), and yeasts (Candida rugosa, Candida cylindracea)], the above substrate specificity would seem to be a unique characteristic of cutinases. Secondly, the hydrolytic activity of the cutinases on PNB appeared much faster than that of the other hydrolytic enzymes mentioned above. Furthermore, the current study proved that even when the cutinases were mixed with large amounts of other hydrolases (lipases or esterases), the Initial hydrolysis rate of PNB was determined only by the cutinase concentration for each PNB concentration. This property of cutinase activity would seem to result from a higher accessibility to the substrate PNB, compared with the other hydrolytic enzymes. Accordingly, these distinct properties of cutinases may be very useful in the rapid and easy isolation of various natural cutinases with different microbial sources, each of which may provide a novel industrial application with a specific enzymatic function.

• Microbiology and Biotechnology Letters
• /
• v.27 no.5
• /
• pp.415-418
• /
• 1999

Thecodiplosis japonensis is an important insect pest in pine trees and hard to be controlled by chemical pesticides due to its characteristic life cycle. Experiments were conducted to determine the pathogenicity and growth temperature of several entomopathogenic fungi as potential microbial insectcides for T. japonensis. Beauveria bassiana SFB-SC and Paecilomyces fumosoroseus SFP-198 were highly pathogenic against T. japonensis. B. bassiana SFB-SC had also pathogenicity against a beneficial insect Bombyx mori. Growth rate and pathogenicity of P. funmosoroseus SFP-198 under 15$^{\circ}C$ was higher than those of B. bassians SFB-SC. These results indicated that P. fumosoroseus SFP-198 is a potential microbial control candidate for control of T. japonensis.

• Biomedical Science Letters
• /
• v.28 no.3
• /
• pp.145-156
• /
• 2022

Over the past few decades, few technologies have had a greater impact on clinical microbiology laboratories than matrix-assisted laser desorption time-of-flight mass spectrometry (MALDI-TOF MS). The MALDI-TOF MS is a fast, accurate, and low-cost and efficient method of microbial identification. This technology generates characteristic mass spectral fingerprints that is a unique signature for each microorganism, making it an ideal method for accurate identification at the genus and species levels of both bacterial and fastidious microorganism such as anaerobes, mycobacterium and fungi etc. In addition, MALDI-TOF MS has been successfully used in microbial subtyping and susceptibility tests such as determination of resistance genes. In this study, the authors summarized the application of MALDI-TOF MS in clinical microbiology and clinical research and explored the future of MALDI-TOF MS.