• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.225-230
• /
• 2006

Nanoimprint lithography (NIL) is a novel method of fabricating nanometer scale patterns. It is a simple process with low cost, high throughput and resolution. NIL creates patterns by mechanical deformation of an imprint resist and physical contact process. The imprint resist is typically a monomer or polymer formulation that is cured by heat or UV light during the imprinting process. Stiction between the resist and the stamp is resulted from this physical contact process. Stiction issue is more important in the stamps including narrow pattern size and wide area. Therefore, the antistiction layer coating is very effective to prevent this problem and ensure successful NIL. In this paper, an antistiction layer was deposited and characterized by PECVD (plasma enhanced chemical vapor deposition) method for metal stamps. Deposition rates of an antistiction layer on Si and Ni substrates were in proportion to deposited time and 3.4 nm/min and 2.5 nm/min, respectively. A 50 nm thick antistiction layer showed 90% relative transmittance at 365 nm wavelength. Contact angle result showed good hydrophobicity over 105 degree. $CF_2$ and $CF_3$ peaks were founded in ATR-FTIR analysis. The thicknesses and the contact angle of a 50 nm thick antistiction film were slightly changed during chemical resistance test using acetone and sulfuric acid. To evaluate the deposited antistiction layer, a 50 nm thick film was coated on a stainless steel stamp made by wet etching process. A PMMA substrate was successfully imprinting without pattern degradations by the stainless steel stamp with an antistiction layer. The test result shows that antistiction layer coating is very effective for NIL.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.1
• /
• pp.79-87
• /
• 2017

The microphysical processes of the numerical weather prediction (NWP) model cover the following : fall speed, accretion, autoconversion, droplet size distribution, etc. However, the microphysical processes and parameters have a significant degree of uncertainty. Parameter estimation was generally used to reduce errors in NWP models associated with uncertainty. In this study, the micro- genetic algorithm and harmony search algorithm were used as an optimization algorithm for estimating parameters. And we estimate parameters of microphysics for the Unified model in the case of precipitation in Korea. The differences which occurred during the optimization process were due to different characteristics of the two algorithms. The micro-genetic algorithm converged to about 1.033 after 440 times. The harmony search algorithm converged to about 1.031 after 60 times. It shows that the harmony search algorithm estimated optimal parameters more quickly than the micro-genetic algorithm. Therefore, if you need to search for the optimal parameter within a faster time in the NWP model optimization problem with large calculation cost, the harmony search algorithm is more suitable.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.733-736
• /
• 1992

Different parameters of subclinical mastitis were compared in 327 cattle and 493 buffaloes and the effect of immunopotentiating agents on subclinical mastitis in these animals was studied. Subclinical mastitis was detected in 8.2 percent buffalo and 24.0 percent cow quarter by modified whiteside test (MWT). In both the species there was decrease in lactose contents with increase in the degree of MWT reactivity i.e. $4.8{\pm}1.14$ to $2.31{\pm}0.82$ in cattle and $5.01{\pm}1.47$ to $2.36{\pm}1.02$ in buffaloes. While the chloride contents of the milk increased with increase in the MWT reactivity i.e. $0.19{\pm}0.4$ to $0.30{\pm}0.06$ in cattle and $0.20{\pm}0.04$ to $0.31{\pm}0.13$ in buffaloes. Micro-organisms belonging to Staphylococcus, Micrococcus, Bacillus, Streptococcus, Enterobacteria, Corynebacterium groups and yeasts were isolated from subclinical mastitis cases. Vitamin E and Levamisole cured 64.5 and 60.0 percent cases of subclinical mastitis in buffaloes but only 32.0 and 24.0 percent cases in cattle. Cure was not affected by the degree of MWT and the type of organisms involved.

• Journal of Magnetics
• /
• v.19 no.4
• /
• pp.333-339
• /
• 2014

Single crystal growth of $BaFe_{12}O_{19}$ by the solid state crystal growth method was attempted. Seed crystals of ${\alpha}-Fe_2O_3$ were pressed into pellets of $BaFe_{12}O_{19}$ + 2 wt% $BaCO_3$ and heat-treated at temperatures between $1150^{\circ}C$ and $1250^{\circ}C$ for up to 100 hours. Instead of single crystal growth taking place on the seed crystal, BaO diffused into the seed crystal and reacted with it to form a polycrystalline reaction layer of $BaFe_{12}O_{19}$. The microstructure, chemical composition and structure of the reaction layer were studied using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), x-ray Diffraction (XRD) and micro-Raman scattering and confirmed to be that of $BaFe_{12}O_{19}$. XRD showed that the reaction layer shows a strong degree of orientation in the (h00)/(hk0) planes in the sample sintered at $1200^{\circ}C$. $BaFe_{12}O_{19}$ layers with a degree of orientation in the (hk0) planes could also be grown by heat-treating an ${\alpha}-Fe_2O_3$ seed crystal buried in $BaCO_3$ powder.

• Tunnel and Underground Space
• /
• v.12 no.4
• /
• pp.268-276
• /
• 2002

In this study, a 3D coordinate measurement system equipped with a laser displacement meter for digitizing rock joint surface was established and the digitized data were used to calculate several roughness parameters. The parameters used in this study were micro avenge inclination $angle(i_{ave})$, average slope of joint $asperity(SL_{ ave})$, root mean square of $i-angle(i_{rms})$, standard deviation of height(SDH), standard deviation of $i-angle(SD_i)$, roughness profile $index(R_P)$, and fractal dimension(D). The relationships between the roughness parameters based on the digitzation of the surface profile were analyzed. Since the measured value varied according to the degree of reflection and the variation of colors at the measuring point, rock joint surface was painted in white to minimize the influence of the surface conditions. The comparison of the measured values and roughness parameters before and after painting revealed the better consequence from measurement on the painted surfaces. Also, effect of measuring interval was studied. As measured interval was increased, roughness parameters were exponentially decreased. The incremental sequence of degree of decrease was $SDH\; i_{ave},\; i_{rms},\; SD_i,\;and\; R_ p-1$. As a result of comparison of parameters from pin-type measurement system and laser type measurement system, all value of parameters were higher when laser-type measurement system was used, except SDH.

• Journal of Forest and Environmental Science
• /
• v.31 no.1
• /
• pp.7-13
• /
• 2015

Forest disturbance sometime considered as a tool of management as it believed that mid level disturbance constructs better micro-climatic conditions which ultimately boost up the plant diversity. The effect of different levels of disturbance on species composition and regeneration is very important. Present attempt was carried out in a temperate evergreen oak forest which was under various degree of disturbance. The study area is one of the large ranges of oak forest in Garhwal Himalaya and compensating various types of daily needs of local people. On the basis of IVI values Quercus leucotrichophora holds first position in all the disturbance zones whereas Myrica esculenta upgraded it's rank in highly disturbed zone and showed less impacted species by disturbance. Berberis aristata and Eupatorium adenophorum in shrub layer and Anaphalis adnata and Bidens pilosa in herb layer were found as disturbance friendly species because they attained higher rank in highly disturbed zone whereas Caryopteris foetida was found disturbance-sensitive in shrub layer. The banj oak regenerated well under mid disturbance as compared to no and high degree of disturbance and a sharp downfall in the species diversity was recorded with increasing magnitude of disturbance. Density-diameter curves showed a reverse trend of lower density in higher girth classes. The results of the study should be useful for the forest management strategies.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.95-95
• /
• 2013

The NdFeB magnet can be classified into the sintered magnet and bonded magnet. The former has superior magnet characteristics but the degree of freedom in shape is highly restricted, whereas the latter has a high degree of freedom, but its magnet characteristics are inferior to the former. When a NdFeB magnet is used at the elevated temperature, part of Nd must be replaced with a high priced Dy to increase its coercive force. For these reasons, a Dy free and high performance NdFeB bonded magnet is desired strongly. The author successfully developed a Dy free NdFeB anisotropic bonded magnet based on discovery of new phenomena called as d-HDDR reaction and its mass production process such as a thermally balanced hydrogen reaction furnace, micro capsuled powder, compression molding / injection molding under magnetic field, magnetic die and so on. Applied to DC brush seat motor for automotive use, the motor has become 50% small in size and weight. The commercialization of a half sized motor for automotive use has been realized up to the market share of 30%. At present, its commercialization is extending to various types of motors such as power tool, ABS motor, wiper motor, window motor, electric bike power motor, and compressor motor. It is expected that the applications will be increasingly enlarged to EV motor, wind generator, EPS motor, washing machine, and glass cutting machine. This innovative technology has realized Dy free high performance magnet and mudt make big contribution to not only rare element strategies but also energy conservation.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.115-120
• /
• 2007

The effect of grain size on the damping capacity of Fe-26Mn-2Al alloy studied in this paper has been investigated after changing the microstructure by cold rolling and changing grain size. Micro structures in Fe-26Mn-2Al at room temperature consist of a large quantity of austenite and a small quantity of ${\varepsilon}\;and\;{\alpha}'$ martensite. And ${\varepsilon}\;and\;{\alpha}'$ martensite was increased by increasing the degree of cold rolling. The content of deformation induced martensite was increased with increasing the degree of cold rolling. Damping capacity was linearly increased with increasing ${\varepsilon}$ martensite content, which suggests that stacking faults and ${\varepsilon}$ martensite variant boundaries are the principle damping sources. With increasing the grain size in Fe-26Mn-2Al alloy, the damping capacity was increased due to increasing the volume fraction of ${\varepsilon}$ martensite by decrement in stability of austenite phase. With decreasing the grain size, the content of deformation induced martensite was decreased and the damping capacity was decreased.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.4
• /
• pp.1-18
• /
• 2015

This paper proposes relational capability as a main driver of constructing inter-organizational collaboration networks. Based on social network theory and relational view literature, three components of relational capability are constructed and implemented by an agent-based model. The components include organizational capability, structural capability, and trust between a partner and a focal firm. These three components are updated by two micro mechanisms: structural mechanism and relational mechanism. Structural mechanism is a feedback loop in which the relational capability increases structural capability and vice versa. Relational mechanism is a learning-by-doing process in which a focal firm experiences success or failure of collaboration and the experience increases or decreases cumulative trust in a partner firm. Result of agent-based simulation shows that a collaboration network emerges through interactions of firm's relational capabilities and the characteristics of emerged networks vary with the contribution of structural capability and trust to relational capability. Specifically, in case structural capability contributes more to relational capability, the average degree centrality and collaboration proportion increases as time passes and enters into an equilibrium state. In that case, almost every firms participated in the network collaborates each other so that the emerged network becomes highly cohesive. In case trust contributes more to relational capability, the results are reversed. In an equilibrium state, the balance of contribution between structural capability and trust makes an emerged network larger and maximizes average degree centrality of the network.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.45-58
• /
• 2016

Freezing and thawing cycles induce deterioration and strength degradation of concrete structures. This study presumes that a large quantity of contact-type defects develop due to the freezing and thawing cycles of concrete and evaluates the degree of defects based on a nonlinearity parameter. The nonlinearity parameter was obtained by an impact-modulation technique, one of the nonlinear ultrasonic methods. It is then used as an indicator of the degree of contact-type defects. Five types of damaged samples were fabricated according to different freezing and thawing cycles, and the occurrence of opening or cracks on a micro-scale was visually verified via scanning electron microscopy. Dynamic modulus and wave velocity were also measured for a sensitivity comparison with the obtained nonlinearity parameter. The possibility of evaluating strength degradation was also investigated based on a simple correlation of the experimental results.