• 분석과학
• /
• 제19권3호
• /
• pp.211-217
• /
• 2006

Diphenyl amine (DPA) was polymerized inside the channels of the mesoporous silica (MCM-41). MCM-41 (C) and MCM-41 (D) were prepared with cetyltrimethyl ammonium bromide (CTAB) and dodecyltrimethyl ammonium bromide (DTAB), respectively and used as hosts. Initially, the self assembly of DPA inside the pores of MCM-41 was made in ${\beta}$-naphthalene sulfonic acid (NSA) medium and subsequently poly (diphenylamine), PDPA was formed by oxidative polymerization. $N_2$ adsorption-desorption measurements of PDPA loaded MCM-41 (C) and MCM-41 (D) show variations in pore volume and surface area between them. A tubular form of poly (diphenylamine), PDPA was envisaged to form in the pores of MCM-41 and supported by high resolution transmission microscopy. The presence of PDPA inside the channel of MCM-41 was further confirmed by FTIR spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction.

• 접착 및 계면
• /
• 제17권4호
• /
• pp.141-148
• /
• 2016

본 연구에서는 트리블럭 공중합체($PEO_{20}PPO_{70}PEO_{20}$, P123)를 주형으로 사용하고 테트라에틸오르소실리케이트(Tetraethyl orthosilicate, TEOS)를 실리카원으로 사용하여 산 조건 하에서 자기조립 과정을 거친 후 메조포러스 실리카(SBA-15)를 합성하였다. SBA-15는 높은 표면적($704m^2g^{-1}$), 균일한 나노세공(8.4 nm) 그리고 잘 배열된 육방체 구조를 가진다. 스피로피란(Spiropyran) 기가 개질된 SBA-15 (Spiropyran-SBA-15)는 3-(트리에톡시실릴)프로필 이소시아네이트(TESPI)와1-(2-하이드록시에틸)-3,3-이메틸인돌리노-6'-니트로벤조프릴로스피렌(HDINS)을 이용하여 SBA-15에 후처리하여 합성하였다. Spiropyran-SBA-15는 개질 후 나노세공 구조의 손상없이 잘 배열된 육방체 구조를 가졌다. 그리고 표면적과 세공 크기는 각각 $651m^2g^{-1}$와 8.0 nm이었다. 그리고 다양한 화학 기체(EtOH, THF, $CHCl_3$, Acetone, HCl)를 이용하여 Spiropyran-SBA-15의 광화학적 특성을 연구하였다. 유기분자 기체들(EtOH, THF, $CHCl_3$, Acetone)에 대한 광 형광 스펙트라의 주요 발광 피크는 603.4 nm부터 592.1 nm까지 blue shift하였다. 피크 세기는 0.8부터 0.3까지 감소하였다. Spiropyran-SBA-15시료를 HCl 기체에 노출한 후 측정한 광 형광 스펙트럼은 현저한 blue shift를 보여주었다. 광 형광 스펙트럼은 592.1 nm까지 이동하였다. 또한, 광 형광 스펙트럼의 정규화된 피크 세기는 0.1까지 감소하였다.

• 한국재료학회지
• /
• 제10권12호
• /
• pp.845-852
• /
• 2000

국내산 kaolinite를 소성한 다음 실리카를 선택적으로 추출하여 중기공성 ${\gamma}-Al_2O_3$를 제조하였다. $1000^{\circ}C$에서 24시간 소성된 kaolinite는 소량의 무정형 실리카와 ${\gamma}-Al_2O_3$으로 이루어진 스피넬 상의 미세구조로 전이되었음을 확인하였다. 다공성 ${\gamma}-Al_2O_3$는 $25~90^{\circ}C$의 반응온도, 0.5~4h의 추출시간 및 1~8M의 KOH 농도범위에서 무정형 실리카를 선택적으로 용해하여 제조할 수 있었다. $90^{\circ}C$, 1시간 및 4M의 KOH 농도조건에서 얻어진 ${\gamma}-Al_2O_3$는 약 $40~80{\AA}$ 정도의 매우 좁은 하나의 기공크기 분포를 가지고 있었으며, mesopore의 기공이 많이 생성되었다. 비표면적은 $250\textrm{m}^2/g$이고, 총 기공부피는 $0.654\textrm{cm}^3/g$로 나타났다.

• Carbon letters
• /
• 제17권1호
• /
• pp.53-64
• /
• 2016

Nitrogen (N)-doped ordered mesoporous carbons (OMCs) with a dual transition metal system were synthesized as non-Pt catalysts for the ORR. The highly nitrogen doped OMCs were prepared by the precursor of ionic liquid (3-methyl-1-butylpyridine dicyanamide) for N/C species and a mesoporous silica template for the physical structure. Mostly, N-doped carbons are promoted by a single transition metal to improve catalytic activity for ORR in PEMFCs. In this study, our N-doped mesoporous carbons were promoted by the dual transition metals of iron and cobalt (Fe, Co), which were incorporated into the N-doped carbons lattice by subsequently heat treatments. All the prepared carbons were characterized by via transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). To evaluate the activities of synthesized doped carbons, linear sweep was recorded in an acidic solution to compare the ORR catalytic activities values for the use in the PEMFC system. The dual transition metal promotion improved the ORR activity compared with the single transition metal promotion, due to the increase in the quaternary nitrogen species from the structural change by the dual metals. The effect of different ratio of the dual metals into the N doped carbon were examined to evaluate the activities of the oxygen reduction reaction.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.518-522
• /
• 2013

사이클로헥사논은 나일론의 단량체로 사용되는 카프로락탐의 원료로 중요한 중간체이며 사이클로헥사놀의 탈수소화반응을 통해 합성된다. 본 연구에서는 탈수소화 반응에 적용하기 위한 촉매로 다양한 메조기공을 가진 금속 산화물(meso-$WO_3$, meso-$TiO_2$, meso-$Fe_2O_3$, meso-CuO, meso-$SnO_2$, meso-NiO)을 나노 복제법에 의해 합성하였다. 그 결과 meso-$WO_3$ >> meso-$Fe_2O_3$ > meso-$SnO_2$ > meso-$TiO_2$ > meso-NiO > meso-CuO 순서로 촉매 활성이 나타났으며, 그 중 meso-$WO_3$가 가장 높은 촉매 활성을 보임을 알 수 있었다. 따라서 사이클로헥사놀을 이용한 탈수소화 반응에 meso-$WO_3$의 폭넓은 응용 가능성을 확인하였다.

• 대한화학회지
• /
• 제52권2호
• /
• pp.155-163
• /
• 2008

유기-실리카 이용한 잔유 구리(II)의 양을 빠른 추출을 위한 간단하고 재현성을 가지는 방법과 불꽃원자 흡수분광법으로의 검출에 대해 연구하였다. 공통으로 존재하는 이온은 분리와 검출에 간섭받지 않았다. 예비농축인자는 100 ml시료 용량에 대해 100 (1 ml 추출용량) 이 였다.제안된 방법의 검출한계는 1.0 ng ml-1이다. 최적조건하에서 흡착제의 최고흡수용량은 5 mg 구리/g 흡착제 였다. 최적조건하에서 상대표준편차는 2.8% (n=10)을 얻었다. 다양한 양의 구리(II)이온은 스파이크한 자연수와 합성수를 시험 시료로 하여 정확도 등을 시험하였다.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.401-406
• /
• 2017

Ammonia, $NH_3$, is a key chemical widely used in chemical industries and a toxic pollutant that impacts human health. Thus, there is a need for the development of effective adsorbents with high uptake capacities to adsorb $NH_3$. An adsorbent with a high surface area and a small pore size is generally preferred in order to have a high capacity for the removal of $NH_3$. The use inorganic nanoporous materials as gas adsorbents has increased substantially and emerged as an alternative to zeolite and activated carbon. Herein, mesoporous alumina (MA) was prepared and used as an $NH_3$ adsorbent. MA showed good pore properties such as a uniform pore size and interlinked pore system, when compared to commercial adsorbents (activated carbon, zeolite, and silica powder). MA has free hydroxyl groups, serving as useful adsorption sites for $NH_3$. In an adsorption isotherm test, MA exhibited 4.7-6.5 times higher uptake capacities for $NH_3$ than commercial adsorbents. Although the larger surface areas of adsorbents are important features of ideal adsorbents, a regular and interlinked adsorbent pore system was found to be a more crucial factor to adsorb $NH_3$.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.119-122
• /
• 2011

A series of mesoporous silicalites was synthesized using different compositions of tetraethylorthosilicate and methyltriethoxysilane (MTES) as the silica source. Cetyltrimethylammonium bromide was used as the organic template. Their detailed pore structures were investigated by transmission electron microscopy, X-ray diffraction, and N2 adsorption method. The thermal properties of these silicalites were studied by thermogravimetric analysis. The increased amount of MTES destroyed mesoporous channels and reduced pore sizes from 3.4 nm to 2.8 nm in calcined silicalites. The calcined silicalite transformed completely into an amorphous state at 30% MTES loading. Methyl pending groups of MTES hindered the structural ordering of ≡Si-O- frameworks, resulting in an amorphous structure. This was caused by the insufficient formation of supramolecular assembly with the organic template. No capillary condensation step was found in MS 7/3 silicalite. The other capillary condensation steps shifted toward the lower relative pressure with increasing MTES content, indicating the reduction of pore sizes.

• Bulletin of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.609-614
• /
• 2008

A periodic mesoporous organosilica material was synthesized by microwave heating (PMO-M) using 1,2-bis(trimethoxysilyl)ethane as a precursor in a cationic surfactant solution, and textural properties were compared with those of the product produced by conventional convection heating (PMO-C). These synthesized materials were characterized using XRD, TEM/SEM, N2 adsorption isotherm, 29Si and 13C NMR, and TGA, which confirmed their good structural orders and clear arrangements of uniform 3D-channels. Synthesis time was reduced from 21 h in PMO-C to 2-4 h in PMO-M. PMO-M was made of spherical particles of 1.5-2.2 m m size, whereas PMO-C was made of decaoctahedron-shaped particles of ca. 8.0 m m size. Effect of synthesis temperature, time, and heating mode on the PMO particle morphology was examined. The particle size of PMO-M could be controlled by changing the heating rate by adjusting microwave power level. PMO-M demonstrated improved separation of selected organic compounds compared to PMO-C in a reversed phase HPLC experiment. Ti-grafted PMO-M also resulted in higher conversion in liquid phase cyclohexene epoxidation than by Ti-PMO-C.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3712-3719
• /
• 2011

Confined Pt and $CoFe_2O_4$ nanoparticles (NPs) in a mesoporous core/shell silica microsphere, Pt-$CoFe_2O_4$@meso-$SiO_2$, were prepared using a bi-functional linker molecule. A large number of Pt NPs in Pt-$CoFe_2O_4$@meso-$SiO_2$, ranging from 5 to 8 nm, are embedded into the shell and some of them are in close contact with $CoFe_2O_4$ NPs. The hydrogenation of cyclohexene over the Pt-$CoFe_2O_4$@meso-$SiO_2$ microsphere at $25^{\circ}C$ and 1 atm of $H_2$ yields cyclohexane as a major product. In addition, it gives oxygenated products. Control experiments with $^{18}O$-labelled water and acetone suggest that surface-bound oxygen atoms in $CoFe_2O_4$ are associated with the formation of the oxygenated products. This oxidation reaction is operative only if $CoFe_2O_4$ and Pt NPs are in close contact. The Pt-$CoFe_2O_4$@meso-$SiO_2$ catalyst is separated simply by a magnet, which can be re-used without affecting the catalytic efficiency.