• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.115-122
• /
• 2014

In this paper, reliability is secured by sensing a post-program resistance of several tens of kilo ohms and restricting a read current flowing over an unblown eFuse within $100{\mu}A$ since RWL driver and BL pull-up load circuits using a regulated voltage of V2V ($=2V{\pm}10%$) are proposed to have a wide operating voltage range for eFuse OTP memory. Also, when a comparison of a cell array of 1 row ${\times}$ 32 columns with that of 4 rows ${\times}$ 8 columns is done, the layout size of 4 rows ${\times}$ 8 columns is smaller with $187.065{\mu}m{\times}94.525{\mu}m$ ($=0.01768mm^2$) than that of 1 row ${\times}$ 32 columns with $735.96{\mu}m{\times}61.605{\mu}m$ ($=0.04534mm^2$).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.486-497
• /
• 2001

In this paper, we propose a new addressing mode, which can be used for programmable image processor to perform image-processing algorithms effectively. Conventional addressing modes are suitable for one-dimensional data processing such as voice, but the proposed addressing mode consider two-dimensional characteristics of image data. The proposed instruction for two-dimensional addressing requires two operands to specify a pixel and doesn't require any change of memory architecture. The proposed two-dimensional addressing mode for image processor has the following advantages. The proposed instruction combines several instructions to load a pixel data from an external memory to a register. Hence, the proposed instruction reduces required code size so that it satisfies high performance and low power requirements of image processor. In addition, it uses inherent two-dimensional characteristics of image data and offers user-friendly instruction to assembler programmer The proposed two-dimensional addressing mode is applicable to DSP, media processor, graphic device, and so on. In this paper, we propose a new concept of two-dimensional addressing mode and an efficient hardware implementation method of it.

• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.341-350
• /
• 2013

The present study aimed to understand the sensory characteristic of change detection by comparing the experience of detecting a salient visual change against the experience of detecting a sensory conflict evoked by a binocular mismatch. In Experiment 1, we used the change detection task where 2, 4, or 6 items were short-term remembered in visual working memory and were compared with following test items. The half of change-present trials were manipulated to elicit a binocular rivalry on the test item with the change by way of monocular inputs across the eyes. The results showed that change detection accuracy without the rivalry manipulation declined evidently as the display setsize increased whereas no such setsize effect was observed with the rivalry manipulation. Experiment 2 tested search efficiency for the search array where the target was designated as an item with the rivalry manipulation, and found the search was very efficient regardless of the rivalry manipulation. The results of Experiment 1 and 2 showed that when the given memory load varies, the experience of detecting a salient visual change become similar to the experience of detecting a sensory conflict by a binocular rivalry.

• Cartoon and Animation Studies
• /
• s.13
• /
• pp.255-267
• /
• 2008

Recently in the field of information design use of multimedia Including animation has been rapidly increased. And its application is expanding in the field of design nevertheless relevant research in this field is scant. In particular research on which characteristics contribute to improvement for effect of information communication is negligible. Until now designers' interest was mainly focused on visual perfection of screen such as diversity and originality. Actually the aspect of recognition of design was mostly overlooked. But considering ultimate purpose of Information design is accurate communication of information thus there should be more endeavor for research on man's visual recognitive faculty and memory in order to Improve power of communication of information for the purpose of reducing confusion of user before its originality and diversity. For this reason this author in this treatise attempted to examine possible impact of multimedia in information design on recognition of user and communication based on theory of effectiveness of media and also attempted to identify how maximize its effect under different circumstances. Theories on effectiveness of media can be summed up as that well- advanced information of multimedia should be analysed from diverse standpoints on relevancy to tasks and recognitive relevancy rather than its simplification from the standpoint of richness of media. For optimal interface design unnecessary recognitive load should be eliminated and information should be structured by laking maximum advantage of working memory of limited quantity. Also there will be need for selection of proper media and suggestion of expressive method to enable building accurate and successful mental image. In this treatise this author attempted to contribute to designer's decision making in future through examining theories on effectiveness of media in connection with the question of which information technology should be used in order to heighten effect of information communication appropriate to information design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1025-1037
• /
• 2015

Flexible base isolation bearings that separate superstructure from ground have been widely used in the construction field because they make a significant contribution to increasing the fundamental period of the structure, thereby decreasing response acceleration transmitted into the superstructure. However, the established bearing devices installed to uphold the whole building give rise to some problems involved with failure and collapse due to lack of the capacity as modern structures are getting more massive and higher. Therefore, this study suggests new isolation bearings assembled with additional restrainers enabled to reinforcing and recentering, and then evaluates their performance to withstand the seismic load. The superelastic shape memory alloy (SMA) bars are installed into the conventional lead-rubber bearing (LRB) devices in order to provide recentering forces. These new systems are modeled as component spring models for the purpose of conducting nonlinear dynamic analyses with near fault ground motion data. The LRB devices with steel bars are also designed and analyzed to compare their responses with those of new systems. After numerical analyses, ultimate strength, maximum displacement, permanent deformation, and recentering ratio are compared to each model with an aim to investigate which base isolation models are superior. It can be shown that LRB models with superelastic SMA bars are superior to other models compared to each other in terms of seismic resistance and recentering effect.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1067-1076
• /
• 2003

Database sharing system (DSS) refers to a system for high performance transaction processing. In DSS, the processing nodes are locally coupled via a high speed network and share a common database at the disk level. Each node has a local memory and a separate copy of operating system. To reduce the number of disk accesses, the node caches database pages in its local memory buffer. In this paper, we propose a dynamic transaction routing algorithm to balance the load of each node in the DSS. The proposed algorithm is novel in the sense that it can support node-specific locality of reference by utilizing the primary copy authority assigned to each node; hence, it can achieve better cache hit ratios and thus fewer disk I/Os. Furthermore, the proposed algorithm avoids a specific node being overloaded by considering the current workload of each node. To evaluate the performance of the proposed algorithm, we develop a simulation model of the DSS, and then analyze the simulation results. The results show that the proposed algorithm outperforms the existing algorithms in the transaction processing rate. Especially the proposed algorithm shows better performance when the number of concurrently executed transactions is high and the data page access patterns of the transactions are not equally distributed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.150-164
• /
• 2013

Currently it is being gradually focused on the mobile application's processing performance implemented by Javascript and HTML (Hyper Text Markup Language) due to the dissemination of mobile web application supply based on the WAC (Wholesale Application Community). If the application software has a simple functional processing structure, then the problem is benign, however, the load of a browser is getting heavier as the amount of Javascript processing is being increased. There is a limitation on the processing time and capacity of the Javascript in the ordinary mobile browsers which are on the market now. In order to solve those problems, the Web Worker that is not supported from the existing Javascript technology is now provided by the HTML 5 to implement the multi thread. The Web Worker provides a mechanism that process a part from the single thread through a separate one. However, it can not guarantee the computing ability as a native application on the mobile and is not enough as a solution for improving the fundamental processing speed. The Cyclostorm overcomes the limitation of resources as a mobile client and guarantees the performance as a native application by providing high computing service and ascripting the Javascript process on the mobile to the computer server on the cloud. From the performance evaluation experiment, the Cyclostorm shows a maximally 6 times faster computing speed than in the existing mobile browser's Javascript and 3 to 6 times faster than in Web Worker of the HTML 5. In addition, the usage of memory is measured less than the existing method since the server's memory has been used. In this paper, the Cyclostorm is introduced as one of the mobile cloud computing services to conquer the limitation of the WAC based mobile browsers and to improve the existing web application's performances.

• Smart Media Journal
• /
• v.12 no.10
• /
• pp.63-70
• /
• 2023

Recently, energy consumption for heating costs, which is 35% of smart farm energy costs, has increased, requiring energy consumption efficiency, and the importance of new and renewable energy is increasing due to concerns about the realization of electricity bills. Renewable energy belongs to hydropower, wind, and solar power, of which solar energy is a power generation technology that converts it into electrical energy, and this technology has less impact on the environment and is simple to maintain. In this study, based on the greenhouse heat storage tank and heat pump data, the factors that affect the heat storage tank are selected and a heat storage tank supply temperature prediction model is developed. It is predicted using Long Short-Term Memory (LSTM), which is effective for time series data analysis and prediction, and XGBoost model, which is superior to other ensemble learning techniques. By predicting the temperature of the heat pump heat storage tank, energy consumption may be optimized and system operation may be optimized. In addition, we intend to link it to the smart farm energy integrated operation system, such as reducing heating and cooling costs and improving the energy independence of farmers due to the use of solar power. By managing the supply of waste heat energy through the platform and deriving the maximum heating load and energy values required for crop growth by season and time, an optimal energy management plan is derived based on this.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2359-2368
• /
• 2013

In this paper, an IRD (internal read data) circuit preventing the reentry into the read mode while keeping the read-out DOUT datum at power-up even if noise such as glitches occurs at signal ports such as an input signal port RD (read) when a power IC is on, is proposed. Also, a pulsed WL (word line) driving method is used to prevent a DC current of several tens of micro amperes from flowing into the read transistor of a differential paired eFuse OTP cell. Thus, reliability is secured by preventing non-blown eFuse links from being blown by the EM (electro-migration). Furthermore, a compared output between a programmed datum and a read-out datum is outputted to the PFb (pass fail bar) pin while performing a sensing margin test with a variable pull-up load in consideration of resistance variation of a programmed eFuse in the program-verify-read mode. The layout size of the 8-bit eFuse OTP IP with a $0.18{\mu}m$ process is $189.625{\mu}m{\times}138.850{\mu}m(=0.0263mm^2)$.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.734-745
• /
• 2006

This paper presents a PC cluster-based distributed VOD server that minimizes the load of an interconnection network by adopting the VIA communication protocol and the interval cache algorithm. Video data is distributed to the disks of the distributed VOD server and each server node receives the data through the interconnection network and sends it to clients. The load of the interconnection network increases because of the large amount of video data transferred. This paper developed a distributed VOD file system, which is based on VIA, to minimize cost using interconnection network when accessing remote disks. VIA is a user-level communication protocol removing the overhead of TCP/IP. This papers also improved the performance of the interconnection network by expanding the maximum transfer size of VIA. In addition, the interval cache reduces traffic on the interconnection network by caching, in main memory, the video data transferred from disks of remote server nodes. Experiments using the distributed VOD server of this paper showed a maximum performance improvement of 21.3% compared with a distributed VOD server without VIA and the interval cache, when used with a four-node PC cluster.