• 제목/요약/키워드: measuring units

검색결과 269건 처리시간 0.022초

Characterization and Food Application of a Potentiometric Biosensor Measuring $\beta$-Lactam Antibiotics

  • Park, In-Seon;Kim, Dong-Kyung;Kim, Nam-Soo
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권4호
    • /
    • pp.698-706
    • /
    • 2004
  • $\beta$-Lactam antibiotics such as penicillin G, amoxicillin, and ampicillin were determined by a potentiometric biosensor system which exploited penicillinase immobilized on Immobilon cellulose nitrate membrane and a flat-bottomed pH electrode-as the biological component and transducer. The optimum reaction buffer for maximum sensitivity was found as 2 mM of sodium phosphate buffer (pH 7.2). The detection limit of the biosensor could be extended to 1 $\mu{M}$ of the analytes by increasing the enzyme loading for immobilization to 100 units/$m\ell$. The model samples spiked with each of the standard penicillins were measured for their biosensor responses and HPLC peak area, resulting in the relative responses of 82.1-103.5% and 79.5-106.1% for the biosensor method along with HPLC analysis, respectively. This result showed a good precision of the current biosensor method for screening the penicillin compounds.

에어컨 실내기의 방사소음과 실외기의 투과소음에 의한 환경소음 예측 (Environmental Noise Assessment of Indoor and Outdoor Units of Air-conditioner)

  • 장서일;최진권;손진희;모진용;구형모
    • 한국소음진동공학회논문집
    • /
    • 제13권1호
    • /
    • pp.40-47
    • /
    • 2003
  • This study was conducted to determine the sound paths and transmitted sound level in house. An air-conditioner system was selected a typical sound source. The measured transmission loss data shows that the apertures have an significant effect on the transmitted noise and comparable with the existing theoretical data. Therefore the complex aperture was substitute to quantitative apertures approximately. An effective simulation method, ray tracing and mirror image source method, was employed in the prediction of transmitted sound level. The measured results were efficiently reflected on the simulated results. So it is important that measuring the acoustic parameter prior to the prediction of the transmitted sound level in the house.

U57 풍력발전기 전력품질 실증연구 (Study of Power Quality Measurement U57 Windturbine)

  • 이병철;박희철;황진수;류지윤
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.310-314
    • /
    • 2008
  • The exploitation of the wind energy resource is a rapidly growing area world-wide. The number of installed units is continuously increasing, and it is important to respect and to deal with the impact of wind turbine. This paper addresses the power quality characteristics of U57 Wind Turbine. 750kW gearless type wind turbine for low wind speed, named U57, is developed by UNISON. The power quality measurement system consists of measuring WTG output current, line-to line voltage and wind speed signal. With using measured data, power quality measurement is evaluated about maximum power, reactive power, voltage fluctuation, harmonics according to IEC 61400-21.

  • PDF

복식방의 조리에 관한 분석적 연구 (Analytical Study on the Cooking in "Bok Sik Bang")

  • 이혜정;이성우
    • 한국식품영양학회지
    • /
    • 제3권2호
    • /
    • pp.185-200
    • /
    • 1990
  • "Bok Sik Bang', a book of cooking, was written in Korea in the 17 th century Various Cooking methods Of traditional foods were described in this book. 1. The kinds of cooking foods were Wine(59), Side dish(39), Seasoning(12), and Dessert(5) 2. The materials used in the cooking foods were cereals, vegetables, fishes, meats and etc. 3. The cooking methods were different and complicated. 4. The way of heating were also different such as to stew, to boil, to pan-boil, to frying, etc. 5. Utensils and table wares used for processing and cooking were poor and specific. 6. The measuring units were not accurate and unscientific. 7. Many of special words and expressions which are not used today in cooking and processing were reviewed.ewed.

  • PDF

열화특성치가 와이블분포를 따르는 경우 두 가지 스트레스 변수를 고려한 가속열화시험의 최적 설계 (Optimal Design of Accelerated Degradation Tests with Two Stress Variables in the Case that the Degradation Characteristic Follows Weibull Distribution)

  • 임헌상;김용수
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제13권2호
    • /
    • pp.87-98
    • /
    • 2013
  • Accelerated degradation tests (ADTs) measuring failure-related degradation characteristic at the accelerated condition are widely used to assess the reliability of highly reliable products. Often, however, little degradation could be observed even in single-stress ADTs due to the high reliability of test unit, and as a result poor estimate of the reliability may be obtained. ADTs with multiple stress variables can be employed to overcome such difficulties. In this paper, optimal ADT plans with two stress variables are developed assuming that the degradation characteristic follows Weibull distribution by determining the stress levels, the proportion of test units allocated to each stress level such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

전자.통신업체의 경영효율성 평가에 관한 연구 (A Study on the Evaluation of Management Performance in Electronics and Communication Companies)

  • 정희진
    • 한국컴퓨터정보학회논문지
    • /
    • 제5권2호
    • /
    • pp.158-164
    • /
    • 2000
  • 본 연구에서는 자료포괄분석(DEA : Data Envelopment Analysis)을 이용하여 전자·통신업체들의 경영효율성 평가를 하였다. 자료포괄분석은 다수 생산자의 효율성을 평가하기 위해 Charnes 등에 의해 개발된 기법으로서 다차원의 투입변수와 다차원의 산출변수를 동시에 고려한 수 있는 기법이라 할 수 있다. 본 연구에서 투입변수로는 원재료비, 종업원수, 생산능력이. 산출변수로는 생산실적, 총매출액 및 당기순이익이 선정되었다. 효율성 평가 결과 대부분의 기업이 대상기간동안 경영효율성이 증가하거나 계속 효율적인 것으로 평가되었으며, 투입 및 산출변수는 높은 상관관계를 가지는 것으로 나타났다.

  • PDF

An Exploration on the Use of Data Envelopment Analysis for Product Line Selection

  • Lin, Chun-Yu;Okudan, Gul E.
    • Industrial Engineering and Management Systems
    • /
    • 제8권1호
    • /
    • pp.47-53
    • /
    • 2009
  • We define product line (or mix) selection problem as selecting a subset of potential product variants that can simultaneously minimize product proliferation and maintain market coverage. Selecting the most efficient product mix is a complex problem, which requires analyses of multiple criteria. This paper proposes a method based on Data Envelopment Analysis (DEA) for product line selection. Data Envelopment Analysis (DEA) is a linear programming based technique commonly used for measuring the relative performance of a group of decision making units with multiple inputs and outputs. Although DEA has been proved to be an effective evaluation tool in many fields, it has not been applied to solve the product line selection problem. In this study, we construct a five-step method that systematically adopts DEA to solve a product line selection problem. We then apply the proposed method to an existing line of staplers to provide quantitative evidence for managers to generate desirable decisions to maximize the company profits while also fulfilling market demands.

뉴럴 네트워크를 이용한 로봇 매니퓰레이터의 역보정 (Inverse Calibration of a Robot Manipulator Using Neural Network)

  • 정동연;김종수;한성현
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1999년도 춘계학술대회 논문집
    • /
    • pp.199-204
    • /
    • 1999
  • The robot inverse calibration method using a neural networks is proposed in this paper. A high-order networks has been used in this study. The Pi-Sigma networks uses linear summing units in the hidden layer and product unit in output layer. The inverse calibration model which compensates the difference of joint variables only between measuring value and analytic value about the desired pose(position orientation) of a robot is proposed. The compensated values are determined by using the weights obtained from the learning process of the neural networks previously. To prove the reasonableness, the selected compliance automatic robot arm type direct drive robot and anthropomorphic robot are simulated. It shows that the proposed calibration method can reduce the errors of the joint variables from ${\pm}$0.15$^{\circ}$to ${\pm}$0.12$^{\circ}$.

  • PDF

NC선반의 원 운동정도 측정장치의 개발 (Developement of Measuring Units of circular Motion Accuracy on NC Lathe)

  • 김영석;김재열
    • 한국공작기계학회논문집
    • /
    • 제10권6호
    • /
    • pp.1-7
    • /
    • 2001
  • It is very important to test circular motion accuracy of NC machine tools as it affects all other machines machined by them in industries. In this paper, it has become possible to detect errors of linear displacement of radial directions for circle tar motion accuracy test using newly assembled magnetic type of linear scale so called Magnescale ball-bar system. It has also organized computer program systems using tick pulses come out from computer for getting error motion data at colt start time interval in circular motion test on NC lathe. Error data gotten from test is expressed to plots and analysed to numerics by various statistical treatments.

  • PDF

In Situ Monitoring of Biofilm Formations of Escherichia coli and Pseudomonas putida by Use of Lux and GFP Reporters

  • Khang, Youn-Ho;Rober S. Burlage
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제3권1호
    • /
    • pp.6-10
    • /
    • 1998
  • A plasmid vector containing two reporter genes, mer-lux and lac-GFP, was transformed to both Escherichia coli and Pseudomonas putida. Their cellular activities and biofilm characteristics were investigated in flow-cell units by measuring bioluminescent lights and fluorescent levels of GFP. Bioluminescence was effective to monitor temporal cell activities, whereas fluorescent level of GFP was useful to indicate the overall cell activities during biofilm development. The light production rates of E. coli and P. putida cultures were dependent upon concentrations of HgCl2. Mercury molecules entrapped in P. putida biofilms were hardly washed out in comparison with those in E. coli biofilms, indicating that P. putida biofilms may have higher affinity to mercury molecules than E. coli biofilms. It was observed that P. putida expressed GFP cDNA in biofilms but not in liquid cultures. This may indicate that the genetic mechanisms of P. putida were favorably altered in biofilm conditions to make a foreign gene expression possible.

  • PDF