• The Journal of Information Technology
• /
• v.7 no.2
• /
• pp.1-5
• /
• 2004

The symmetric 9-phenyl-5,5'-diphenyl-3,3'-bis-(3-sulfopropyl)-benzoxazolo carbocyanine triethyl ammonium salt is of industrial importance as green-sensitizing dye in the spectral sensitization of emulsion microcrystals in negative film and positive paper-making. The stability on the solvents of benzoxazolo carbocyanine dye was measured by UV-Vis spectrophotometer, and then dye was stabilized in various solvents. The maximum absorption peak range in various solvents was 507nm~515nm. It was identified that the solvents can be used to photographic emulsion.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.933-938
• /
• 2007

These days, up-to-date humanoid robots are continuously developed. Among them, Qrio, Asimo[1,2] are famous for its unique walking technology and natural movement. These robots could show manufacturers' technological improvement and leave a good impression to the customer. In accordance with global trends, Samsung is also producing humanoid robot. The humanoid robot, however, could walk like a human compared to the industrial robot fixed in the factory. This feature could cause another dynamic effect while walking. In this paper, the robot's feet were examined to find out parameters that affect stability of the humanoid robot's feet. With the sensitivity analysis, the optimization procedure in design of experiments finds the most suitable performance of robot. Maximum deflection of the frame upon various cases was minimized, and rubber coefficients for shock absorption were optimized.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.13-17
• /
• 2013

A new assembly derived from 2,3-dibromo-5,6,7,8-tetrafluoroquinizarin and sodium diethyl-carbamodithiolate, was prepared as an efficient $Fe^{3+}$ colorimetric chemosensor with high selectivity over other cations $Fe^{3+}$, $Na^+$, $Mg^{2+}$, $Pb^{2+}$, $Cd^{2+}$, $Ni^{2+}$, $Ca^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Zn^{2+}$ : from the dark blue to brown color change that is visible by eyes. This assembly produced large bathochromic shift of 228 nm in the presence of $Fe^{3+}$ compared with the corresponding absorption maximum of the parent dye.

• Journal of Pharmaceutical Investigation
• /
• v.2 no.1
• /
• pp.14-17
• /
• 1972

Spectrophotometric determination of isonicotinic acid hydrazide sodium methane sulfonate was examined and a new method has been established. Isonicotinic acid hydrazide sodium methane sulfonate reacts with acetylacetone solution (NASH Reagent) to produce a yellow dye, which exhibits absorption maximum at about $412\;m{\mu}$. Limits of masurement of isonicotinic acid hydrazide sodium methane sulfonate was $20-100{\mu}g/ml$. By this method isonicotinic acid hydrazide methane sulfonate can be determined in the presence of isonicotinic acid hydrazide.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.65-72
• /
• 1994

Collapse characteristics of thin-walled hatted section tubes are investigated. The square section members with flanges are substituted by the equivalent rectangular tube. The stiffening effects of flanges are transformed to the restraining plate with the equivalency of buckling strength. The square tubes of single-hatted and double-hatted sections are investigated. The double-hatted section members show symmetric and antisymmetric crushing modes depending on the stiffness of flanges. The single-hatted section members show only symmetric modes. The bifurcation point of the compact crushing modes are investigated by experiments and shown almost same thickness-width ratio of the rectangular tubes. A large maximum crippling strength can be obtained by double-hatted section members with proper flange dimensions.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.6
• /
• pp.678-682
• /
• 1998

A strain of Streptomyces sp. SK-862, isolated from soil in Wonju city, was able to prodce a biologically active substance that has a strong inhibitory activity against proteolsis by trypsin. The inhyibitory substance was extracted by n-butanol, and then purified by the adsorption chromatography followed by the reverse-phase high performacne liquid chromatography. The purified substance was stable over the pH range from 2 to 10, but was unstable when treated at 8$0^{\circ}C$ for 60 min. This substance was soluble in water, methanol, ethanol nd butanol, but insoluble in chlorofrom and ethylacetate. The Rf value of the purified substance on the thin layer chromatography were 0.56 in n-butanol : methanol : water(5 : 3 : 1v/v) solvent system compare dto 0.23 in ethanol : ammonium hydoxide : water(8 : 1 : 1v/v) solvent system. This substance has maximum absorption at 259 nm. The chemical reaction of the substance was negative for sugar but positive for ninhydrine and iodine reaction.

• Membrane and Water Treatment
• /
• v.4 no.3
• /
• pp.215-222
• /
• 2013

The maximum current density that can be achieved in bipolar membrane electrodialysis is limited by the sharp increase in resistance that is experienced when the water content at the membrane interface is not adequately replenished and the membranes dry out. In this paper we show how the water content near the interface depends on the properties of the membranes. A water retaining parameter is introduced, which characterizes the thermodynamic properties of the membrane material and may be used to guide the choice of polymers for mitigation of the dry-out problem.

• Structural Engineering and Mechanics
• /
• v.51 no.6
• /
• pp.1017-1036
• /
• 2014

Steel tubes have an efficient shape with large second moment of inertia relative to their light weight. One of the main problems of these members is their low buckling resistance caused from having thin walls. In this study, steel foams with high strength over weight ratio is used to fill the steel tube to beneficially modify the response of steel tubes. The linear eigenvalue and plastic collapse FE analysis is done on steel foam filled tube under pure compression and three point bending simulation. It is shown that steel foam improves the maximum strength and the ability of energy absorption of the steel tubes significantly. Different configurations with different volume of steel foam and composite behavior is investigated. It is demonstrated that there are some optimum configurations with more efficient behavior. If composite action between steel foam and steel increases, the strength of the element will improve, in a way that, the failure mode change from local buckling to yielding.

• Structural Engineering and Mechanics
• /
• v.61 no.2
• /
• pp.171-181
• /
• 2017

This paper summarizes the study on effect of ceramic waste powder as partial substitute to cement in binary blend and along with silica fume in ternary blend high strength concrete in normal and aggressive environments. Strength parameters such as compression & tension and durability indices such as corrosion measurement, deterioration, water absorption and porosity were studied. Ceramic waste powder was used in three different percentages namely 5, 10 and 15 with constant percentage of silica fume (1%) as substitutes to cement in ternary blend high strength concrete was investigated. After a detailed investigation, it was understood that concrete with 15% ceramic waste powder registered maximum performance. Increase of ceramic waste powder offered better resistance to deterioration of concrete.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.59-71
• /
• 2009

Measuring ink penetration is one of the best ways to know paper printability. Ink penetration was effected by physical properties of newsprint paper. This study was carried out for the purpose of improvement printability with ink penetration of domestic newsprint paper. The samples were prepared by means of 20 newsprint paper manufacture company in Korea, and were tested by IGT printability tester. The results of this experiments showed that the depth of ink penetration according to the printing pressure. The maximum points in ink transfer curve and the coefficients of oil absorption of the papers also depend mainly upon the situation of anchor points.