• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3319-3325
• /
• 2014

Eu(III)-doped $CeO_2$ nanorods were prepared by a co-precipitation method at room temperature, and their photoluminescence profiles were examined with different Eu(III)-doping concentrations and thermal annealing temperatures. Scanning electron microscopy, X-ray diffraction crystallography and UV-Vis absorption spectroscopy were employed to examine the morphology, crystal structure and photon absorption profiles of the nanorods, respectively. Additionally, their 2D and 3D-photoluminescence profile maps were obtained to fully understand the photoluminescence mechanism. We found that the magnetic dipole $^5D_0{\rightarrow}^7F_1$ and the electric dipole $^5D_0{\rightarrow}^7F_2$ transitions of Eu(III) were highly dependent on the doping concentration, annealing temperature and excitation wavelength, which was explained by the presence of different Eu(III)-doping sites (with and without an inversion center) in the $CeO_2$ host with a cubic crystal structure.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 추계학술발표회
• /
• pp.174-176
• /
• 1996

In the YBCO matrix, 10wt.% Y$_2$BaCuO$\_$5/ (211 phase) was added, the final 211 content of YBCO made by MTG process could reach about 20wt.% which was the optimum value for the critical current density. And also 10wt.% Ag was added in the matrix of YBCO, which was nearly about the saturate solubility of silver in textured YBCO. SmBaCuO crystal was grown by the melted-condensed process. A 5${\times}$5${\times}$2㎣ single crystal of SmBaCuO was used to be the seed in the preparation of YBCO. It was proved the orientation of YBCO was the same as the orientation of the SmBaCuO seed. The oxygen absorption of bulk oriented YBCO was studied and the heat treatment of oxygen absorption would be in flowing oxygen, at 400$^{\circ}C$ for about 24 hours. the magnetic hysteresis loops were measured by Vibrating Smaple Magnetometer and the J$\_$c/ was calcuated by means of Bean's model.

• Journal of Magnetics
• /
• 제12권4호
• /
• pp.149-151
• /
• 2007

The AlCrN films were grown by RF reactive sputtering method under the selected conditions. The Cr concentration was varied by the number of Cr pieces placed on the Al target. The sample quality has been studied by XRD, Auger spectroscopy, optical absorption and electrical resistant measurements. The XRD and Auger results show that the samples consist of a major phase with the $Al_{1-x}Cr_xN$ formula, which has a hexagonal structure, and a few percents at. of oxygen, which may form $Al_2O_3$. There exist the Cr clusters in the samples with high concentration of Cr. The optical absorption measurement provides the information about the band gap that relates strongly to the quality of samples. The quality of samples is also clearly reflected in electrical measurement, i.e., the temperature dependence of resistance exhibits a semiconductor characteristic only for the samples that have no Cr cluster. In these cases, the values of ionization energies $E_a$ can be derived from R(T) plots by using the function R(T) = Ro exp $(E_a/k_BT)$.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.562-570
• /
• 2016

At the carbon dioxide capture process using the aqueous amine solution, degradation of absorbents is main factor to reducing the process performance. Also, degradation mechanism of absorbent is important for understanding the environmental risk, route of degradation products, health risk etc. In this study, the degradation products of MEA were studied to clarify mechanism in thermal degradation process. The degradation products were analyzed using a $^1H$ NMR (nuclear magnetic resonance) and $^{13}C$ NMR. The analysis methods used in this study provide guidelines that could be used to develop a degradation inhibitor of absorbent and a corrosion inhibitor.

• Bulletin of the Korean Chemical Society
• /
• 제16권11호
• /
• pp.1084-1088
• /
• 1995

A complete solid solution (SrLaAl1-xNixO4) between insulating SrLaAlO4 and metallic SrLaNi(Ⅲ)O4 oxides were prepared under high oxygen pressure (1.5 kbar, 800 ℃). They have tetragonal K2NiF4-type structure in all the solid solution range. Compared with lattice parameters of the same solid solution prepared under normal condition (1 bar, 1200 ℃), large decrease in the c-parameter was induced by high pressure treatment while no noticeable variation of the a-parameter was observed. Although marked changes of structural parameters, magnetic susceptibilities, and electron paramagnetic resonance spectra were consistently occurred before and after x=0.5, overall behaviors were essentially the same with those of solid solution prepared under normal condition. Such a phenomenon is explained by assuming the formation of partially filled narrow σ*x2-y2 band for x>0.5. Lattice contraction along the c-axis by high pressure treatment seems not to broaden this band. Particularly, the continuous absorption characteristic of a high free carrier concentration for x>0.5 and the absence of Ni-O in-plane stretching mode in the infrared absorption spectra supports this picture. However, the conductivities increasing with temperature for all solid solution suggest that some localization character, of probably Anderson type, remains for x>0.5.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.143-148
• /
• 2022

For the purpose of treating health checkups and recovery of patients in a super-aged society, hospitals use devices designed with a reduction circuit of electromagnetic waves associated with the specific absorption rate of electromagnetic waves absorbed by the human body. In this paper, we proposed a filter improvement design method capable of reducing electromagnetic waves. As a result of confirming the validity of the proposed technique through simulation and experimental results, the following result values were obtained. Applying the common-mode (CM) inductor 4 mH to a calibration circuit, noise decreased in a multiband spectrum. Using the differential mode(DM) inductor 40 µH element in the primary calibration circuit, the noise decreased by 15 dB or more in the 3 MHz band spectrum. Also, applying the Admittance Capacitance (Y-Cap) 10 nF element in the secondary calibration circuit resulted in the decrease by more than 30 dB in the band spectrum before 2 MHz. After using a common-mode inductor 4 mH element in the tertiary calibration circuit, it decreased by more than 15 dB in the band spectrum after 2 MHz.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.312-312
• /
• 2012

Magnesium oxide has become focus for research activities due to its use in magnetic tunnel junctions and for understanding of do ferromagnetism. Theoretical investigations on such type of system indicate that the presence of defects greater than a threshold value is responsible for the magnetic behaviour. It has also been shown experimentally that by decreasing the film thickness and size of nanoparticles, enhancement/increase in magnetization can be achieved. Apart from the change in dimension, swift heavy ions (SHI) are well known for creating defects and modifying the properties of the materials. In the present work, we have studied the irradiation induced effects in magnesium oxide thin film deposited on quartz substrate via X-ray absorption spectroscopy (XAS). Magnesium oxide thin films of thickness 50nm were deposited on quartz substrate by using e-beam evaporation method. These films were irradiated by 200 MeV Ag15+ ion beam at fluence of $1{\times}10^{11}$, $5{\times}10^{11}$, $1{\times}10^{12}$, $3{\times}10^{12}$ and $5{\times}10^{12}ions/cm^2$ at Nuclear Science Centre, IUAC, New Delhi (India). The grain size was observed (as studied by AFM) to be decreased from 37 nm (pristine film) to 23 nm ($1{\times}10^{12}ions/cm^2$) and thereafter it increases upto a fluence of $5{\times}10^{12}ions/cm^2$. The electronic structure of the system has been investigated by X-ray absorption spectroscopy (XAS) measurements performed at the high energy spherical grating monochromator 20A1 XAS (HSGM) beamline in the National Synchrotron Radiation Research Center (NSRRC), Taiwan. Oxides of light elements like MgO/ZnO possess many unique physical properties with potentials for novel application in various fields. These irradiated thin films are also studied with different polarization (left and right circularly polarized) of incident x-ray beam at 05B3 EPU- Soft x-ray scattering beamline of NSRRC. The detailed analysis of observed results in the wake of existing theories is discussed.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.514-520
• /
• 2021

나노입자에 기초한 약물 전달 시스템(DDS, Drug Delivery System)은 약물 방출의 매개체로서 약물의 방출량을 조절하고 적합한 장소에 전달하여 효능을 향상시키기 위해 사용되어왔다. 독성이 없고 생 분해성인 Chitosan은 좋은 생체 적합성을 가지고, 뛰어난 흡착력을 가져 약물전달체로 제조할 수 있다. 기본 아미노산 중 하나인 Valine은 근육의 성장과 조직의 회복을 돕는 물질이며 다른 아미노산과 함께 혈당 수치를 낮추고 성장호르몬 생산을 증가시키는 필수아미노산이다. 본 연구에서는 Valine을 약물 흡수가 가능한 자성 Chitosan에 흡착시켜 TPP (tripolyphosphate)와의 cross-linking을 통해 약물전달체를 제조한 후, 흡수 및 방출 경향성에 대해 알아보았다. 안정성이 비교적 높은 Fe₃O₄를 사용하여 약물전달체가 자성을 띠게 만들어 표적 부위로 약물을 전달할 수 있도록 하였다. 최적의 조건에서 제조한 약물전달체를 아미노산의 정색반응인 Ninhydrin test를 통해 흡수 및 방출 경향성을 UV-Vis로 분석하여 확인하고 입자의 크기를 측정함으로써 약물전달체로 적합한 것을 확인하였다.

• 한국콘텐츠학회논문지
• /
• 제20권2호
• /
• pp.472-477
• /
• 2020

본 연구는 자기공명영상 검사 시 전자파흡수율을 감소시키는 대안으로 환자정보의 체중을 낮게 입력하는 방법의 오류를 바로잡고자 하였다. 연구방법은 환자정보에 입력하는 체중에 따라 전자파흡수율이 변화되지 않는다는 사실을 증명하기 위해 50kg 팬텀을 코일 안에 위치시킨 후 입력 체중을 10kg에서부터 100kg 까지 10kg 단위로 변화시켜 기기에서 산출되는 전자파흡수율을 비교평가 하였다. 연구결과, T1 강조영상은 전자파 흡수율이 평균 0.2W/kg이었고 T2 강조영상은 평균 0.4W/kg이었으나, T1, T2 강조영상 모두 체중의 변화에 따른 전자파흡수율의 변화는 없었다. 결론적으로 검사 전 검사자가 입력하는 체중에 따라 전자파흡수율은 변화되지 않으므로, 환자정보 입력 시 체중을 낮게 입력하는 것은 전자파흡수율을 감소시키는 대안이 될 수 없다.

• 전자공학회논문지SC
• /
• 제42권2호
• /
• pp.33-38
• /
• 2005

신체 내 혈당 변화량과 $^1H$ 원자핵의 스핀-격자 완화시간의 변화량이 관련 있음과 원자핵의 스핀-격자 완화시간을 측정하는 방법으로 자기공명흡수법이 제안된 바 있다. 자기공병흡수법에 의하여 신체 내 혈당 변화량을 감지하기 위해서는 검출 영역내 고수준의 자기장의 세기와 균일도의 확보가 필수적이다. 가정에서 손쉽게 혈당의 변화량을 측정할 수 있도록, 본 논문에서는 가정용으로 적합한 크기와 무게를 가지면서 요구되는 자기장의 세기와 균일도를 확보한 무혈혈당측정기를 디자인하였다. 여러 형상과 재질을 갖는 초기 모델들을 설계, 제작하였고, 검출 영역의 자기 특성을 비교하여 최종 재질을 결정하였다. 또한, 유한요소 해석모델을 구축하고 형상 최적화를 통하여 최종 모델을 선정하였다.