• 대한산업공학회지
• /
• 제29권3호
• /
• pp.247-252
• /
• 2003

We propose an approximation of the M/G/1 system with finite workload capacity, where those customers whose admission to the system would increase the workload beyond a prespecified finite capacity limit are not accepted. Our approximation method is based on the idea that the service time of a customer in the M/G/1 system can be approximated as the sum of service times of a batch of customers in the $M^X/d/1$ system where the deterministic service time d is small enough. That is, the original service time is discretized and approximated by the batch size. We exemplified our method by obtaining the average workload of the M/M/1 system by means of the $M^X/d/1$ system, where the batch size is geometric. In addition, the approximate blocking probabilities of the M/M/1 and $M/E_k/1$ system with finite workload capacities are sought. The proposed method turns out to give a good approximation, which is compared with a simulation.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.247-251
• /
• 2003

In this paper, we propose an approximation of the M/G/1 system with finite workload capacity, where customers whose admission to the system would increase the workload beyond a prespecified finite capacity limit are not accepted. Our approximation method is based on the idea that the service time of a customer in the M/G/1 system can be approximated as the sum of service times of a batch of customers in the $M^{X}/d/1$ system where the service time is deterministic and very small. That is, the original service time is discretized and approximated by the batch size. We exemplified our method by obtaining the average workload of the M/M/1 system by means of the $M^{X}/d/1$ system, where the batch size is geometric. In addition, the approximate blocking probabilities of the M/M/1 and $M/E_{k}/1$ system with finite workload capacities are sought. The proposed method turns out to give a good approximation, which is compared with a simulation.

• 한국시뮬레이션학회논문지
• /
• 제23권3호
• /
• pp.1-9
• /
• 2014

전통적인 워크플로우 시간분석은 단위작업을 독립적인 M/M/1 대기행렬모형에 적용하여 수행해왔다. M/M/1 시스템 성능척도의 일반해들을 활용하면 여러 가지 분석이 가능해진다. 특히 워크플로우 시스템의 AND 구조를 분석함에 있어 M/M/1 시스템 성능척도를 활용하면 그 체재시간에 대한 분석이 가능하다. 그러나 실질적인 AND 구조를 정확히 묘사하기 위해서는 각각의 M/M/1 시스템이 독립이라는 가정이 없어야 한다. 본 연구는 이러한 한계를 극복하기 위해 한 업무에 대한 모든 단위작업이 동시에 시작하는 상황으로 가정한다. 이 가정 하에서는 M/G/1 시스템의 성능척도를 이용하여 이론적 분석이 가능해진다. 또한 시뮬레이션을 이용하여 실질적인 AND 구조를 정확히 묘사할 수 있는 방법론을 소개한다. 마지막으로 가상의 시스템을 구성하여 이론적인 해와 시뮬레이션 결과들을 수록함으로써 제안된 방법론들을 검증한다. 본 연구에서 사용된 주요 시스템 성능척도는 평균대기시간과 평균체재시간이다.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.155-161
• /
• 2017

This paper presents a new nonmechanical rehabilitation system driven by magnetic force. Typically, finger rehabilitation mechanisms are complex mechanical systems. The proposed method allows wireless operation, a simple configuration, and easy installation on the hand for active actuation by magnetic force. The system consists of a driving coil, driving magnets (M1), and auxiliary magnets (M2 and M3), respectively, at the finger, palm, and the center of coil. The magnets and the driving coil produce three magnetic forces for an active motions of the finger. During active actuations, magnetic attractive forces between M1 and M2 or between M1 and M3 enhance the flexion/extension motions. The proposed system simply improves the extension motion of the finger using a magnetic system. In this system, the maximum force and angular variation of the extension motion were 0.438 N and $49^{\circ}$, respectively. We analyzed the magnetic interaction in the system and verified finger's active actuation.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.347-356
• /
• 2020

In this study, Inclined Geosynchronous Orbit (IGSO) and Geostationary Orbit (GEO) of BeiDou System (BDS) and Quasi Zenith Satellite System (QZSS) satellites positions and clock errors calculated by broadcast ephemeris and compared with Multi-GNSS Experiment (MGEX) products provided by five Analysis Centers (ACs). Root Mean Square Errors (RMSE) calculated for satellite position error. The IGSO results showed that 1.82 m, 0.91 m, 1.28 m in BDS and 1.34 m 0.36 m 0.49 m in QZSS and the GEO results showed that 2.85 m, 6.34 m, 6.42 m in BDS and 0.47 m, 4.79 m, 5.82 m in QZSS in the direction of radial, along-track and cross-track respectively. RMS calculated for satellite clock error. The IGSO result showed that 2.08 ns and 1.24 ns and the GEO result showed that 1.28 ns and 1.12 ns in BDS and QZSS respectively.

• 상하수도학회지
• /
• 제18권6호
• /
• pp.770-777
• /
• 2004

Three pilot-scale membrane systems were operated using lake water as influent in this study. Microfiltration (MF) membrane with pore size of 0.01 m was used in Systen I of which filtration mode was set at constant pressure of $1kgf/cm^2$. Ultrafiltration (UF) membranes with molecular cutoff (MWCO) of 80,000 and 13,000 were used in System II-1 and II-2, respectively. Constant flow mode was applied at the range between 0.7 and $1.5m^3/m^2{\cdot}d$ (average of $1.1m^3/m^2${\cdot}d) for System II-1 and between 0.37 and $1.65m^3/m^2{\cdot}d$ (average of $1.18m^3/m^2{\cdot}d$) for System II-2. In System I, the flux changed from $1m^3/m^2{\cdot}d$ to $0.2m^3/m^2{\cdot}d$ during the operation time of 5 months. System II showed recovery of 94% under the allowable maximum pressure of $3kgf/cm^2$ during the same operation period. From these results, the efficient operation was observed in constant flow mode with respect to filtration time and recovery. Average filtrate turbidity showed 0.0071 NTU in System I and 0.0054 NTU in System II, which implied that high turbidity removal was obtained in both MF and UF systems with no significant difference between MF and UF. From the fact that membrane flux depends largely on membrane type and operation mode, a guideline of optimum design and operation should be suggested for application of membrane systems to full scale water treatment.

• 한국경영과학회지
• /
• 제41권3호
• /
• pp.37-43
• /
• 2016

This note discusses the inter-loss time ofan M/G/1/1 queuing system. The inter-loss time is defined as the time duration between two consecutive losses of arriving customers. In this study, we present the explicit Laplace transform of the inter-loss time distribution of an M/G/1/1 queuing system.

• Journal of Oral Medicine and Pain
• /
• 제43권1호
• /
• pp.1-7
• /
• 2018

Purpose: The purpose of the study was to investigate the influences of hyaluronic acid on the candidacidal activities of lysozyme, the peroxidase system, and the glucose oxidase-mediated peroxidase (GO-PO) system at different concentrations of antimicrobial enzymes. Methods: Hyaluronic acid was used at a final concentration of 0.5 mg/mL. Hen egg-white lysozyme (HEWL) was used at concentrations ranging from 10 to $100{\mu}g/mL$. The peroxidase system included bovine lactoperoxidase (bLPO), potassium thiocyanate (KSCN, 1 mM), and hydrogen peroxide ($100{\mu}M$). The GO-PO system included bLPO, KSCN (1 mM), glucose oxidase (10 units/mL), and glucose ($30{\mu}g/mL$). The final concentration of bLPO in the peroxidase and GO-PO systems ranged from 12.5 to $100{\mu}g/mL$. Candida albicans strains ATCC 10231, 11006, and 18804 were utilized. Candidacidal activities of antimicrobials and the influence of hyaluronic acid on their candidacidal activities were determined based on colony forming units. Results: Candidacidal activities of the peroxidase and GO-PO systems increased with increasing concentrations of bLPO. This tendency was the same in the presence or absence of hyaluronic acid. Candidacidal activity of HEWL was not significantly concentration-dependent. Candidacidal activities of the GO-PO system were higher than those of the corresponding peroxidase system. Candidacidal activity was inhibited in the presence of hyaluronic acid in the following order: HEWL, the peroxidase system, and the GO-PO system. Conclusions: Hyaluronic acid inhibited the candidacidal activities of HEWL, the peroxidase system, and the GO-PO system. The GO-PO system exhibited better candidacidal activity than HEWL and the peroxidase system both in the presence and absence of hyaluronic acid.

• Kyungpook Mathematical Journal
• /
• 제50권1호
• /
• pp.117-122
• /
• 2010

In this paper, we introduce the concepts of 1-prime ideals and 2-prime ideals in semirings. We have also introduced $m_1$-system and $m_2$-system in semiring. We have shown that if Q is an ideal in the semiring R and if M is an $m_2$-system of R such that $\overline{Q}{\bigcap}M={\emptyset}$ then there exists as 2-prime ideal P of R such that Q $\subseteq$ P with $P{\bigcap}M={\emptyset}$.

• 한국콘텐츠학회논문지
• /
• 제12권1호
• /
• pp.30-37
• /
• 2012

선형 비틀림 구조를 갖는 메모리 시스템은 SIMD 구조에 적합한 메모리 시스템으로써, 2차원 데이터 배열인 $M{\times}N$에서 임의의 위치로부터 임의의 간격을 갖고 다양한 접근형태들로, m개의 메모리 모듈들에서 n개의 데이터를 동시에 접근할 수 있다. 그러나 이러한 메모리 시스템은 논리적인 2차원 $M{\times}N$ 데이터 배열을 지원하기 위해 $m{\times}cells$의 물리적인 메모리 용량이 필요하지만, 적어도 (m-n)${\times}cells$만큼의 메모리 셀은 사용되지 않는다. 여기서 cells는 (M-1)/q+(N-1)/$p{\times}{\lceil}M/q{\rceil}+1$이다. 본 논문에서는 이러한 메모리 시스템의 모든 기능들을 수용하면서 t>0인 조건 하에 사용되지 않는 메모리 셀들 중 $(n{\times}t){\times}N/p$ 만큼을 n개의 처리기들에 지역 버퍼 메모리로 제공할 수 있는 방법을 제안한다.