• 제목/요약/키워드: low-speed

검색결과 6,557건 처리시간 0.036초

LID 시설 관리를 위한 사물인터넷(IoT) 활용 복합 센싱 적용기술 개발 (Development of Composite Sensing Technology Using Internet of Things (IoT) for LID Facility Management)

  • 이승재;전민수;이정민;김이형
    • 한국습지학회지
    • /
    • 제22권4호
    • /
    • pp.312-320
    • /
    • 2020
  • 도시 환경문제 및 개발사업 환경영향 저감을 위하여 자연적 물 순환 기능을 가진 다양한 LID가 적용되고 있다. 그러나 LID 시설의 과도한 침투와 증발산은 LID 내부 토양을 건조화시켜 식물과 미생물 활동성을 떨어뜨리고 환경저감 능력을 감소시킨다. 본 연구는 LID 시설의 관리 방안을 도출하기 위하여 복합적인 센서를 적용한 실시간 측정 시스템을 개발하고자 하였다. 측정 가능한 센서와 사물인터넷(IoT) 적용 실험은 아크릴 상자에 형상화한 인공습지에서 수행되었다. 적용되는 센서는 분산형으로 설치되는 LID를 고려하여 저비용으로 구축하고자 하였으며 비교적 저렴하면서 상용화되어있는 아두이노와 라즈베리 파이를 기반으로 하였다. 그리고 LID 시설의 현재 상태와 유지관리 및 이상기후 시 영향을 분석하기 위해 복합적인 센서 측정 개발에 목표를 두었다. 센서는 풍향·풍속, 강우량, 이산화탄소, 미세먼지, 온도·습도, 산성도, 위치 정보 등을 실시간으로 측정하도록 하였다. 또한 측정된 데이터의 수집, 전송 및 결과 확인을 위하여 데이터 수집 장치, 저장 서버 프로그램 및 PC와 모바일 활용 결과 확인 프로그램을 개발하였다. 각 센서를 통해 얻은 측정값들은 Wifi 모듈을 통해 관리 서버로 전달되고 실시간으로 데이터베이스 서버에 저장된다. 본 연구에서 수행한 4개월간의 측정 결과를 분석한 결과 LID 시설에 ICT 기술 적용의 안정성과 적용 가능성을 확인하였다. 실시간으로 측정된 값은 LID 시설의 기능 평가 및 유지관리 방안 도출을 위한 빅데이터 활용이 가능한 것으로 나타났다.

아말감 수복시(修復時) Cavity varnish와 Bonding agent 도포(塗布)에 따른 접합성(接合性)에 관(關)한 주사전자현미경적(走査電子顯微鏡的) 연구(硏究) (A SCANNING ELECTRON MICROSCOPIC STUDY ON THE MARGINAL ADAPTIBILITY IN APPLYING THE CAVITY VARNISH AND DENTIN BONDING AGENT IN AMALGAM RESTORATIONS)

  • 김석훈;조영곤
    • Restorative Dentistry and Endodontics
    • /
    • 제15권1호
    • /
    • pp.107-119
    • /
    • 1990
  • The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.

  • PDF

제 2급 와동에서 구치부 복합레진의 미세변연누출에 관한 연구 (MICROLEAKAGE OF POSTERIOR PACKABLE COMPOSITE RESIN hi THE GINGIVAL MARGINS OF CLASS II CAVITIES)

  • 최수진;김미자;권혁춘
    • Restorative Dentistry and Endodontics
    • /
    • 제27권3호
    • /
    • pp.249-256
    • /
    • 2002
  • The use of flowable composite resins as liners in class II packable composite restoration has been suggested by some manufacturers. However, the contributions of this technique are unproven. The purpose of this study was to compare the gingival microleakage in class II packable composite restorations with or without the use of flowable composite resins as liners. Slot cavities were prepared on both proximals of 80 extracted human molars and randomly assigned to 8 groups of 20 each. The gingival margins were located at 1mm above CEJ in 80 cavities (group1-4) and 1mm below CEJ in 80 cavities (group5-8). The prepared teeth were mounted in the customized tray with adjacent teeth to simulate clinical conditions and metallic matrix band (Sectional matrix) and wooden wedges were applied. After acid etching and application of Single Bond, each group was restored with the following materials using incremental placement technique: Group 1,5 (Filtek P60), group 2, 3, 4 and group 6, 7, 8 (AeliteFlo, TetricFlow, Revolution/ Filtek P60). All specimens were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 1 mimute dwell time, immersed 2% methylene blue dye for 24 hours and then rinsed with tab water. The specimens were embedded in clear resin and sectioned longitudinally through the center of restoration with a low speed diamond saw. Dye penetration at gingival margin was viewed at 20 magnification and analyzed on a scale of 0 to 4. Kruscal-Wallis One way analysis and Mann-Whitney Rank sum test were used to analyze the results. The results of this study were as follows. 1. The leakage values seen at the enamel margin were significantly lower than those seen at the dentin margin(P<0.05). 2. On the enamel margin, packable composite resins with flowable liners showed lower leakage than those without flowable liners, but there were no significant differences among the four groups(P>0.05). 3. On the dentin margin, four groups demonstrated moderate to severe leakage, and there were no significant differences in leakage values(P>0.05).

사회적 네트워크 분석을 이용한 온라인 커뮤니티의 참가자 상호작용에 대한 비교 문화적 연구 (A Cross-Cultural Study on the Interaction of Participants in the Online Community Using Social Network Analysis)

  • 이혜준;이동일;우원석
    • 디지털융복합연구
    • /
    • 제14권9호
    • /
    • pp.73-87
    • /
    • 2016
  • 본 연구는 Hofstede의 문화차원을 기준으로 온라인상에서의 문화적 차이를 사회 네트워크 분석을 통해 비교하는 것을 목적으로 한다. 이를 위해 동양 문화권에 속하는 한국과 영미 문화권에 속하는 미국, 영국의 온라인 커뮤니티에서 수집된 휴대폰 관련 구전 데이터를 활용하여 사회 네트워크 분석을 실시하였다. 분석결과 불확실성 회피성향을 반영하는 매개 중앙성을 제외한 모든 사회 네트워크 지표가 오프라인 상에서의 주장과 상반되는 결과를 보였다. 온라인상에서는 네트워크의 밀도와 연결 정도 중앙성, 위세 중앙성이 영미 문화권보다 한국에서 높게 나타나 한국이 영미 문화권보다 개인주의 성향이 강하고, 권력 거리가 작게 나타났다. 커뮤니케이션 속도 또한 한국보다 영미 문화권이 빠를 것으로 예상하였으나, 한국의 커뮤니케이션 속도가 영미 문화권에 비해 더 빠른 것으로 나타났다. 본 연구는 온라인상에서의 문화적 차이가 오프라인과 다르게 나타남을 발견하여 문화권에 대한 고정관념이 온라인 상에 그대로 적용되어서는 안 된다는 점을 확인함과 동시에, 온라인이 일탈의 공간으로써의 역할을 담당할 수 있음을 제시하였다. 또한 본 연구는 온라인상에서의 문화는 오프라인과는 다른 차원에서 접근할 필요가 있음을 확인하였다는 점에서 연구의 의의를 찾을 수 있을 것이다.

14b 100MS/s $3.4mm^2$ 145mW 0.18un CMOS 파이프라인 A/D 변환기 (A 14b 100MS/s $3.4mm^2$ 145mW 0.18um CMOS Pipeline A/D Converter)

  • 김영주;박용현;유시욱;김용우;이승훈
    • 대한전자공학회논문지SD
    • /
    • 제43권5호
    • /
    • pp.54-63
    • /
    • 2006
  • 본 논문에서는 4세대 이동 통신 시스템에서 요구되는 사양을 위해, 해상도, 동작속도, 칩 면적 및 소모 전력을 최적화한 14b 100MS/s 0.18um CMOS ADC를 제안한다. 제안하는 ADC는 동작 모델 시뮬레이션을 통해 최적화된 구조를 분석 및 검증하여 3단 파이프라인 구조로 설계하였으며, Nyquist 입력에서도 14 비트 수준의 유효비트 수를 가지는 광대역 저잡음 SHA 회로를 기반으로 하고, MDAC에 사용되는 커패시터의 소자 부정합에 의한 영향을 최소화하기 위하여 3차원 완전 대칭 구조를 갖는 레이아웃 기법을 적용하였다. 또한, 100MS/s의 동작 속도에서 6 비트의 해상도와 소면적을 필요로 하는 최종단의 flash ADC는 오픈 루프 오프셋 샘플링 및 인터폴레이션 기법을 사용하였다. 제안하는 시제품 ADC는 SMIC 0.18um CMOS 공정으로 제작되었으며, 측정된 DNL과 INL은 14비트 해상도에서 각각 1.03LSB, 5.47LSB 수준을 보이며, 100MS/s의 샘플링 속도에서 SNDR 및 SFDR이 각각 59dB, 72dB의 동적 성능을 보여준다. 시제품 ADC의 칩 면적은 $3.4mm^2$이며 소모 전력은 1.8V 전원전압에서 145mW이다.

다목적 방사선 조사장치 개발 및 선량분포특성 (The Development of a Multi-Purpose Irradiator and the Characteristic of Dose Distribution)

  • 이동훈;지영훈;이동한;김윤종;홍승홍
    • 전자공학회논문지SC
    • /
    • 제39권6호
    • /
    • pp.42-48
    • /
    • 2002
  • 다목적 방사선 조사장치의 설계, 제작 및 성능검사에 대해 기술하였다. 세슘-137을 사용한 다목적 방사선조사장치는 생물학에서 저선량 방사선에 대한 영향연구, 혹은 TLD(Thermo Luminescent dosimeter)의 교정을 위해 사용되어진다. 본 조사장치는 방사선 동위원소를 안전한곳에 저장하고 있다가 방사선조사시에만 조사실로 180도 회전하여 설정된 시간만큼 시료에 방사선 조사가 이루어 진 후, 사용이 끝나면 다시 차폐된 저장위치로 복귀하게된다. 제어시스템은 PLC 기반으로 구축하여 저선량율 조사장치의 시제품을 제작하였으며, 또한 컴퓨터를 통해 방사선 조사장치의 제어 및 세부 동작 상태 등을 실시간 검색, 원격제어 및 관리 할 수 있는 종합 관리 프로그램을 개발하였다. 조사실 내부 구성은 시료의 종류에 따라 최대 20RPM까지 다양하게 회전하면서 균일 조사될 수 있도록 조사실 및 챔버를 설계 제작하였으며, 조사실내 넣을 수 있는 조사체 최대 용량은 4.5리터이다. 조사실내의 방사선량의 분포도는 가프크로믹 필름을 사용하여 측정한 결과 2Ci 범위내에서 세슘-137의 경우 공기중에서 0.13cGy/min이었고 일반 물질과 등가인 물에서는 0.11cGy/min로 나타났으며, 오차는 약 ${\pm}$7%의 한도내에서 균일한 분포를 보였다. 또한 실제 누설선량은 조사실 밖 표면에서 최대 0.35mR/hr이였으며 1m 떨어진곳에서는 최대 0.03mR/hr로 허용치 이내였다.

데이터 트래픽 중심의 LTE망에서 VoIP를 위한 스케줄링 알고리즘 성능 분석 (Performance Evaluation of Scheduling Algorithm for VoIP under Data Traffic in LTE Networks)

  • 김성주;이재용;김병철
    • 전자공학회논문지
    • /
    • 제51권12호
    • /
    • pp.20-29
    • /
    • 2014
  • 최근 국내외에서는 LTE가 도입 초기단계를 넘어, LTE-A로의 도약이 이루어지고 있다. 이를 기반으로 고속의 서비스를 제공함으로써, 이동 전화로 시작한 휴대폰의 역할은 데이터 중심의 스마트폰으로 바뀌고 있다. 시스코에 의하면 2018년 전세계 모바일 데이터 트래픽은 지난해 대비 11배 증가 전망할것으로 내다봤다. 한국에서 모바일 비디오가 전국 모바일 트래픽에서 차지하는 비중은 2013년 66%에서 2018년 75%로 증가할 전망이다. 하지만 여전히 음성 서비스가 가장 중요하며, 높은 VoIP 통화 품질을 제공하기 위해서는 다양한 데이터 트래픽을 사용하는 가운데 LTE 망 상황에 따라 전송 속도를 조절하고, 낮은 BLER을 제공해야 한다. 실제 통화를 위한 전송율이 최대 23.85 Kbps인 AMR-WB 코덱을 사용하지만, 초당 수십~수백 MB까지 전송할수 있는 LTE일지라도 셀 가장자리의 사용자에게 일정 수준의 전송률을 떨어뜨리지 않고 유지하는 것은 어려운 일이다. 본 논문에서는 이러한 점을 개선하기 위해 특히 문제가 많이 발생하는 셀 가장자리의 품질을 개선하고자, 다양한 스케줄링 알고리즘의 성능을 분석하고 개선 방안을 제시하였다. 제시된 방안은 2계층 스케줄링 알고리즘을 사용하며, 셀 가장자리에 위치한 VoIP 사용자를 일정 비율 타 어플리케이션에 비해 우선 처리하는 스케줄링 알고리즘을 제공하는 기술이다. 본 논문에서는 throughput과 BLER 측면에서 VoIP 성능이 향상되었음을 확인하였다.

한강에서 월동하는 수금류의 서식지로서 중랑천의 중요성 (The Role of Jungrangchun for a Wintering Waterbirds in Hangang)

  • 김미란;이윤경;안지영;김인홍;유정칠
    • The Korean Journal of Ecology
    • /
    • 제28권1호
    • /
    • pp.45-53
    • /
    • 2005
  • 도심 하천은 야생조수에게 물의 공급원이며 서식지로서 도시 생태계를 유지시키는 중요한 역할을 담당한다. 본 조사는 서울의 주요 하천 중 하나인 중랑천에서 월동 수금류의 서식지 이용 실태를 알아보고자 수행되었다. 개체군 변동에 대한 분석은 1997년 12월부터 1998년 3월까지 수행된 센서스와 1999년부터 2004년까지의 환경부와 국립환경연구원이 실시한 겨울철 조류 동시 센서스 자료를 참고로 하였으며 개체군의 서식지 이용에 대한 조사는 쇠오리의 월동 행동 관찰을 통해 수행되었다 중랑천에서 월동하는 조류는 최소 3,004개체에서 최대 8,237개체로 주로 수면성 오리류였으며 잠수성 오리류도 상당수가 도래하였다. 연간 개체군 변동은 수면성 오리류보다는 잠수성 오리류에서 크게 나타났고 전체 수금류 개체군은 1월말과 2월말에 가장 많은 수가 도래하였다. 시간대별 개체군 변동을 보면 수금류의 개체수는 오후로 갈수록 증가하여 특히 일몰 후에는 한강 본류로부터 유입되는 개체가 크게 증가하는 것으로 보아 이 지역은 수금류의 주간 취식지뿐만 아니라 야간취식지로서 중요하게 이용되는 것으로 보인다. 잠수성 오리인 비오리와 댕기흰죽지는 낮은 기온과 높은 풍속일 때 개체수가 증가하는 것으로 보아 날씨에 따라 중랑천을 휴식지로 이용하는 것으로 보인다.

Study on Growth Characteristics of Sargassum fulvellum in the Integrated Multi-trophic Aquaculture (IMTA) System

  • Kim, Young-Dae;Park, Mi-Seon;Min, Byung-Hwa;Jeong, Seong-Jae;Kim, Hyung-Chul;Yoo, Hyun-Il;Lee, Won-Chan;Choi, Jae-Suk
    • 한국환경과학회지
    • /
    • 제23권10호
    • /
    • pp.1703-1718
    • /
    • 2014
  • An eco-friendly integrated multi-trophic aquaculture (IMTA) farming technique was developed with the goal of resolving eutrophication by excess feed and feces as fish-farming by-products. A variety of seaweed species were tried to remove inorganic nutrients produced by fish farming. However, there have been few trials to use Sargassum fulvellum in an IMTA system, a species with a relatively wide distribution across regions with various habitat conditions, great nutrient removal efficiency and importance for human food source and industrial purposes. In this regard, our study tried to examine feasibility of using S. fulvellum in an IMTA system by analyzing growth characteristics of the species in an IMTA system comprising of rockfish (Sebastes shlegeli), sea cucumber (Stichopus japonocus) and the tried S. fulvellum (October 2011 - November 2012). We also monitored environment conditions around the system including current speed, water temperature and inorganic nutrient level as they may affect growth of S. fulvellum. S. fulvellum in the IMTA system, which were $15.72{\pm}5.67mm$ long at the start of the experiment in October 2011, grew to a maximum of $1093{\pm}271.13mm$ by May 2012. In September, seaweed growth was reduced to a minimum of $280{\pm}70.43mm$ in length. Then, S. fulvellum began to grow again reaching $325{\pm}196.19mm$ by November 2012. Wet weight of the seaweed was $4.01{\pm}1.89g$ at the start of the experiment and reached a maximum of $109.26{\pm}34.23g$ in May. The weight gradually declined to a low of $15.12{\pm}8.40g$ in September 2012. Weight began to increase once more, rising to $39.27{\pm}21.69g$ by November. During the experiment, the average velocity at the surface and the bottom was 6.5 cm/s and 3.4 cm/s, respectively. The water temperature ranged $5.0-23.5^{\circ}C$, which was considered suitable for growing S. fulvellum. Results of the study indicated no significant differences in inorganic nutrients between pre- and post-IMTA installation. It was thus concluded that S. fulvellum can be a suitable seaweed species to be used in an IMTA system.

분수공적분을 이용한 KOSPI200지수의 현.선물 장기균형관계검정 (A Study on the Long-Run Equilibrium Between KOSPI 200 Index Spot Market and Futures Market)

  • 김태혁;임순영;박갑제
    • 재무관리연구
    • /
    • 제25권3호
    • /
    • pp.111-130
    • /
    • 2008
  • 이 논문은 분수공적분 개념을 이용하여 KOSPI200지수와 지수선물가격간에 장기균형관계가 있는지를 살펴보고 있다. 이것을 위해 로그변환 현 선물가격 각각의 분수차분계수를 주파수영역 (frequency domain)의 GPH 추정량을 구한 다음, 현 선물 회귀식의 추정을 통해 도출한 균형오차의 차분계수와 비교하였다. 이 방법은 전통적인 공적분방법에서 규명하지 못한 금융시계열자료의 통계적인 특성을 분석할 수 있는 장점이 있다. 분석결과를 요약하면 다음과 같다. 첫째, 정수차원의 차분구조모형에서는 공적분검정을 통한 장기균형관계의 증거를 찾기가 어려웠다. ADF 단위근 검정과 KPSS 정상성 검정에서 상반된 결과가 제시되어 두 시계열을 I(1)으로 확정하기가 불가능하였다. 둘째, GPH 추정량를 이용하여 차분계수를 추정한 결과, 두 시계열 모두 불안정한 장기기억구조를 가지는 것으로 식별되었고 균형오차는 정상적인(stationary) 장기기억구조를 가져 현 선물가격간에 분수공적분관계가 있는 것으로 파악되었다. 이 논문은 선물시장과 현물시장이 장기균형관계를 국내 선행연구에서 이용하지 않았던 분수공적분을 이용하여 분석했다는 점에서 그 의의를 찾을 수 있다.

  • PDF