• Title/Summary/Keyword: low voltage

Search Result 6,395, Processing Time 0.041 seconds

Design and Implementation of Low-Voltage and Lour-Power Driving Method for Plasma Display Panel (저 전압, 저 전력 Plasma Display Panel 구동 회로의 설계 및 구현)

  • Kim, Sang-Bong;Choi, Jin-Ho;Jang, Yun-Sepk
    • Proceedings of the IEEK Conference
    • /
    • 2004.06b
    • /
    • pp.601-604
    • /
    • 2004
  • In this paper, we propose a driving circuit that can be operated with a lower voltage than that of the conventional circuit without reducing the discharge voltage. the circuit proposed in this paper has a merit to improve the electrical characteristics because it can be composed of switching devices with low voltage. The operation and efficiency using real devices. The features of the circuit proposed in this paper are as follows; the power loss can be decreased by the use of low voltage, the cost if the driving circuit for PDP can be reduced by the use of switching devices operated with low voltage.

  • PDF

A New Single-Stage PFC AC/DC Converter with Low Link-Capacitor Voltage

  • Lee, Byoung-Hee;Kim, Chong-Eun;Park, Ki-Bum;Moon, Gun-Woo
    • Journal of Power Electronics
    • /
    • v.7 no.4
    • /
    • pp.328-335
    • /
    • 2007
  • A conventional Single-Stage Power-Factor-Correction (PFC) AC/DC converter has a link capacitor voltage problem under high line input and low load conditions. In this paper, this problem is analyzed by using the voltage conversion ratio of the DC/DC conversion cell. By applying this analysis, a new Single-Stage PFC AC/DC converter with a boost PFC cell integrated with a Voltage-Doubler Rectified Asymmetrical Half-Bridge (VDRAHB) is proposed. The proposed converter features good power factor correction, low current harmonic distortions, tight output regulations and low voltage of the link capacitor. An 85W prototype was implemented to show that it meets harmonic requirements and standards satisfactorily with near unity power factor and high efficiency over universal input.

A Study on Vector control of AC motor using Low-Voltage DSP for semiconductor transportation equipments (반도체 제조 장비용 저 전압 DSP칩을 이용한 서보 모터의 벡터제어에 관한 연구)

  • 홍선기;방승현;최치영
    • Journal of the Semiconductor & Display Technology
    • /
    • v.2 no.3
    • /
    • pp.25-30
    • /
    • 2003
  • In this study, the controller using TMS320LF2407 low voltage DSP for motor control is designed and realized. It has 40 MIPS calculating ability and its driving voltage is 3.3 V for low power. The peripheral elements, however usually use 5 V and they need voltage transfer interface. In this study, voltage transformation and reducing noise are studied and space vector PWM is adopted as a motor control scheme. According to these methods, the efforts for software programming and calculation processes are reduced. In addition, the hardware is also simplified by substituting the current control part with software programming. Through this study, the DSP based servo controller increases its ability for high performance multi-function on semiconductor transportation equipments..

  • PDF

A Low power Scheduling and Allocation Algorithm for Multiple Supply Voltage (다중 공급 전압을 이용한 저 전력 스케쥴링 및 할당 알고리듬)

  • 최지영;박남서;안도희
    • Journal of the Korea Society of Computer and Information
    • /
    • v.7 no.2
    • /
    • pp.79-86
    • /
    • 2002
  • This paper presents a low power scheduling and allocation algorithm for multiple supply voltage. The proposed supply voltage scheduling algorithm determines the control step to execute a possible the operation experimentally using another supply voltage level. Also, the switching activity using component library. and the supply voltage allocation method uses the graph coloring technique for low power, the proposed algorithm Proves the effect through various high level benchmark examples to adopt a multiple supply voltage scheduling algorithm for low power.

  • PDF

Low voltage organic light-emitting devices with new electron transport layer

  • Ha, Mi-Young;Kim, So-Youn;Moon, Dae-Gyu
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2007.08a
    • /
    • pp.679-682
    • /
    • 2007
  • We have developed low voltage operating OLEDs with new electron transport layer. The device having a structure of ITO/2TNATA/HTL:Rubrene(1%)/HTL /new ETL/LiF/Al have been used. The voltage for achieving $1,000\;cd/m^2$ was 4.1 V, whereas the turn on voltage for the brightness of $1\;cd/m^2$ was 2.8 V. This high luminance at low operating voltage is caused by the high current density, resulting from high electron conduction property of the new electron transport layer.

  • PDF

Design of the CMOS Low-Voltage Regulation Circuit (CMOS 소자를 이용한 저전압 안정화 회로 설계)

  • Kim, Yeong-Min;Lee, Keun-Ho;Hwang, Jong-Sun;Kim, Jong-Man;Park, Hyun-Chul
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.05b
    • /
    • pp.124-127
    • /
    • 2002
  • A CMOS voltage regulation circuit for use at low-voltage is proposed. Circuits for a positive and for a negative current regulation are presented and are designed with commercial CMOS technology. The voltage regulation that is stable over ambient temperature variations is an important component of most data acquisition systems. These results are verified by the H-SPICE simulation $0.8{\mu}m$ parameter. As the result, the temperature dependency of output voltage is $0.57mV/^{\circ}C$ and the power dissipation is 1.8 mV on 5V supply voltage.

  • PDF

A Study on Bipolar DC-DC Converter for Low Voltage Direct Current Distribution (저압 직류 배전용 양극성 DC-DC 컨버터에 관한 연구)

  • Lee, Jung-Yong;Kim, Ho-Sung;Cho, Jin-Tae;Kim, Ju-Yong;Cho, Younghoon
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.24 no.4
    • /
    • pp.229-236
    • /
    • 2019
  • This study proposes a DC-DC converter topology of solid-state transformer for low-voltage DC distribution. The proposed topology consists of a voltage balancer and bipolar DC-DC converter. The voltage and current equations are obtained on the basis of switching states to design the controller. The open-loop gain of the controller is achieved using the derived voltage and current equations. The controller gain is selected through the frequency analysis of the loop gain. The inductance and capacitance are calculated considering the voltage and current ripples. The prototype is fabricated in accordance with the designed system parameters. The proposed topology and designed controller are verified through simulation and experiment.

Investigation of Interplay between Driving Voltage of MZ Modulators and Bandwidth of Low-pass Filters in Duobinary Modulation Formats

  • Lee, Dong-Soo
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.20 no.9
    • /
    • pp.11-17
    • /
    • 2006
  • We have theoretically investigated the effects of the interplay between the driving voltage of Mach-Zehnder(MZ) modulators and the bandwidth of low-pass filters(LPF) in 10[Gb/s] duobinary modulation systems. For the change of driving voltage ratios(driving voltage/switching voltage), the transmission performance has been evaluated over 200[km] of single-mode fiber(SMF) systems. For driving voltage ratios with smaller than 100[%], the transmission performance has been maintained and greatly affected by the bandwidth of LPFs than the driving voltage. For driving voltage ratios with larger than 100[%], the transmission performance has been degraded and is not sensitive to the bandwidth of LPFs. To see the limitation of driving voltage, we have reduced the driving voltage ratio to 50[%]. Our results suggest that 10[Gb/s] duobinary signals with driving voltage ratio with smaller than 100[%] have been transmitted over 200[km] SMF within 2[dB] power penalty without dispersion compensation. For the driving voltage ratio with 50[%], we have verified that the transmission performance was maintained.

Simulation and Experiment of Dynamic Torsional Vibration during Grid Low Voltage in a PMSG Wind Power Generation System (PMSG 풍력발전시스템에서 전원 저전압 발생시 비틀림 진동 동특성 시뮬레이션 및 실험)

  • Kwon, Sun-Hyung;Song, Seung-Ho
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.18 no.3
    • /
    • pp.211-216
    • /
    • 2013
  • A wind generator system model includes wind model, rotor dynamics, synchronous generator, power converter, distribution line and infinite bus. This paper investigates the low-Voltage Ride-Through capability of PMSG wind turbine in a variable speed. The drive train of a wind turbine on 2-mass modeling can observe the shaft torsional vibration when the low-voltage occur. To reduce the torsional vibration when the low-voltage occur, this paper designs suppression control algorithm of the torsional vibration and implements simulation. The simulation based on MATLAB/SIMULINK has validated at the transient state of the PMSG and an experiment using 3kW simulator has validated the LVRT control.

The Design of Low Voltage CMOS Gm-C Continuous-Time Filter (저전압 CMOS Gm-C 연속시간 필터 설계)

  • Yun, Chang-Hun;Jung, Sang-Hoon;Choi, Seok-Woo
    • Proceedings of the KIEE Conference
    • /
    • 2001.11c
    • /
    • pp.348-351
    • /
    • 2001
  • In this paper, the Gm-C filter for low voltage and low power applications using a fully-differential transconductor is presented. The designed transconductor using the series composite transistors and the low voltage composite transistors has wide input range at low supply voltage. A negative resistor load (NRL) technology for high DC gain of the transconductor is employed with a common mode feedback(CMFB). As a design example, the third-order Elliptic lowpass filter is designed. The designed filter is simulated and examined by HSPICE using TSMC $0.35{\mu}m$ CMOS n-well parameters. The simulation results show 138kHz cutoff frequency and 11.05mW power dissipation with a 3.3V supply voltage.

  • PDF