본 논문에서는 고속 동작과 저전력 동작을 요구하는 디지털 회로 시스템에 사용될 수 있는 Current-mode FIR Filter를 위한 OTA(:Operational Trans-conductance Amplifier) 회로를 제안한다. Current-mode 신호처리는 동작 주파수와 상관없이 일정한 전력을 유지하는 특징이 있기 때문에 고속 동작을 요구하는 디지털 회로 시스템의 저전력 동작에 매우 유용한 회로설계 기술이라고 할 수 있다. 0.35um CMOS 공정을 이용한 시뮬레이션 결과, Vdd=2V에서 전원 전압의 50%에 해당하는 약 1V의 Dynamic Range를 확보하였으며, 약 0~200uA의 출력전류를 확인하였다. 설계한 OTA 회로의 전력은 약 21uW가 계산되었으며, Active Layout 면적은 $71um{\times}166um$ 사이즈로 집적화에 유리할 것으로 기대된다.
IEEE 802.l1b 무선 네트워크에서 스테이션들이 저전력 모드로 동작할 때, 스테이션들은 액세스 포인트 (AP)가 주기적으로 전송하는 비콘(beacon)에 동기를 맞춘다. 잡음이나 이웃한 무선 네트워크의 트래픽으로 인해 비콘 수신에 장애가 발생하는 경우 다음 번 비콘까지 깨어서 에너지를 소모하게 된다. 이 논문에서 에너지를 적게 소모하면서 다음 비콘을 탐지하기 위한 방법을 제안한다. IEEE 802.l1b 무선 인터페이스의 저전력 모드에서 비콘 수신 장애 문제점이 설명되었고 에너지 소모를 줄이기 위한 새로운 탐지 방법이 제안되었다. 네트워크 시뮬레이터인 ns2를 이용하여 제안된 방법에 대해 모의실험이 수행되었고 IEEE 802.l1b의 저전력 모드와 비교했다. 스테이션이 깨어있는 시간으로 측정된 결과는 무선 네트워크에서 프레임의 수신오류가 발생할 때 에너지 소모가 개선되는 것을 보여준다.
IEEE 802.11b 무선 네트워크에서 스테이션들이 저전력 모드로 동작할 때, 액세스 포인트(AP)가 주기적으로 비콘(beacon)을 전송하여 스테이션들을 관리한다. 비콘을 수신한 후 스테이션들이 전송매체에 대해 경쟁하고 전송매체가 이용 가능할 때까지 전송매체의 상태를 계속해서 검사한다. 따라서 각 스테이션에서 에너지 소모는 무선 네트워크의 부하에 따라 증가한다. 이 논문에서 다수의 스테이션들이 있는 무선 네트워크에서 가상비트맵을 제어하여 스테이션에서 에너지 소모를 줄이는 방법을 제안한다. IEEE 802.11b 무선 인터페이스의 저전력 모드의 문제점이 설명되었고 에너지 소모를 줄이기 위한 새로운 방법이 제안되었다. 네트워크 시뮬레이터인 ns2를 이용하여 제안된 방법에 대해 모의실험이 수행되었고 IEEE 802.11b의 저전력 모드와 비교했다. 스테이션이 깨어있는 시간으로 측정된 결과는 무선 네트워크에서 다수의 스테이션들이 AP를 경유하여 통신이 이루어질 때 에너지 소모가 개선되는 것을 보여준다.
초저전력 설계나 에너지 수확 활용은 동적 전력과 정적 전력 사이의 균형을 이루는 점에 근접하는 문턱전압이하의 매우 낮은 전압에서 작동하는 디지털 시스템을 요구한다. 이런 동작 모드에서 일반적인 논리회로의 지연 변화는 매우 크게 된다. 따라서, 본 논문에서 MOSFET 나노 공정기술에서 전력소비를 줄이면서 여러 가지 공정 변이의 영향을 받지 않는 비동기 방식의 NCL (Null conventional logic)을 사용한 저전력 논리회로 설계 방법을 제안하고자 한다. 제안된 NCL 회로는 45nm의 공정기술에서 0.4V의 공급전압을 사용하였고, 각 NCL회로는 속도와 전력에 의해서 일반적인 동기식 회로와 비교되었다.
JSTS:Journal of Semiconductor Technology and Science
/
제15권2호
/
pp.255-266
/
2015
In this paper, a low-complexity and low-power soft output multiple input multiple output (MIMO) symbol detector is proposed for mobile devices with two transmit and two receive antennas. The proposed symbol detector can support both the spatial multiplexing mode and spatial diversity mode in single hardware and shows the optimal maximum likelihood (ML) performance. By applying a multi-stage pipeline structure and using a complex multiplier based on the polar-coordinate, the complexity of the proposed architecture is dramatically decreased. Also, by applying a clock-gating scheme to the internal modules for MIMO modes, the power consumption is also reduced. The proposed symbol detector was designed using a hardware description language (HDL) and implemented using a 65nm CMOS standard cell library. With the proposed architecture, the proposed MIMO detector takes up an area of approximately $0.31mm^2$ with 183K equivalent gates and achieves a 150Mbps throughput. Also, the power estimation results show that the proposed MIMO detector can reduce the power consumption by a maximum of 85% for the various test cases.
In this paper, a novel beta-multiplier reference current source circuit for the 800mV power-supply voltage is presented. In order to cope with the narrow input common-mode range of the OpAmp in the reference circuit, shunt resistive voltage divider branches were deployed. High gain OpAmp was designed to compensate intrinsic low output resistance of the MOS transistors. The proposed reference circuit was designed in a standard 0.18um CMOS process with nominal Vth of 420mV and -450mV for nMOS and pMOS transistor respectively. The total power consumption including OpAmp is less than 50uW.
본 논문에서는 최근 무선 통신 시스템에서 빠른 데이터전송 방식으로서 사용되고 있는 OFDM 통신방식의 저소비전력화 방안을 제안한다. 일반적으로 OFDM에서 주요 신호처리 방식은 디지털을 이용한 프리에 변환이다. 이런 디지털 프리에 변환은 많은 소비전력이 필요하며 이것은 무선통신 시스템에 있어서 커다란 제약이 되고 있다. 전류모드를 이용한 아날로그 프리에 변환(FFT) LSI는 이러한 소비전력의 문제를 해결할 수 있는 주요 대안으로 떠오르고 있다. 그러나 이러한 신호처리 방식을 사용하기 위해서는 전류모드를 이용한 직병렬/병직렬 변환기(Serial-to-Parallel/Parallel-to-Serial Converter)가 필수적으로 필요하다. 본 논문에서는 전류모드로 구성한 아날로그 프리에 변환(FFT) LSI를 이용해 수신단의 저소비전력을 실현하기 위해 필수적인 새로운 전류모드 직병렬/병직렬 변환기를 제시하였으며 설계된 칩의 측정결과가 시뮬레이션 결과와 일치하는 것을 확인하였다. 제안된 전류모드 직병렬/병직렬 변환기의 개발로 저소비전력에 큰 장점을 지니고 있는 아날로그 FFT LSI의 활용이 가능해졌으며 송수신단 시스템에서 큰 소비전력의 감소효과를 가져올 것으로 기대된다.
In this paper, a novel scheme to eliminate common-mode voltage (CMV) is proposed for three-level neutral-point clamped (NPC) inverters. In the proposed scheme, a low-power full-bridge converter is utilized to produce compensatory voltage for CMV, which is injected into an NPC inverter through a single-phase four-winding transformer. With the proposed circuit, the power range for applications is not limited, and the maximum modulation index of the inverter is not reduced. These features are suitable for high-power medium-voltage machine drives. The effectiveness of the proposed method is verified by simulation and experimental results.
한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
/
pp.402-403
/
2009
A variety of power reduction technologies is introduced and the benefits of the technologies are discussed. PenTile$^{(R)}$ DBLC (Dynamic Brightness LED Control) combined with SABC (Sensor-Based Adaptive Brightness Control) enables to achieve the average LED power consumption to one third. The panel power reduction of 25% can be achieved with low power driving technology, ALS (Active Level Shifter). MIP (Memory In Pixel) is expected to be useful in transflective display because the whole display area can be utilized in reflective mode with power consumption of 1mW.
A novel family of Buck mode three-level direct ac converters with a high frequency link is proposed. These converters can transfer an unsteady high ac voltage with distortion into a regulated sinusoidal voltage with a low THD at the same frequency. The circuit configuration is constituted of a three-level converter, high frequency transformer, cycloconverter, as well as input and output filters. The topological family includes forward, push-pull, half-bridge, and full-bridge modes. In order to achieve a reliable three-level ac-ac conversion, and to overcome the surge voltage and surge current of the cycloconverter, a phase-shifted control strategy is introduced in this paper. A prototype is presented with experimental results to demonstrate that the proposed converters have five advantages including high frequency electrical isolation, lower voltage stress of the power switches, bi-directional power flow, low THD of the output voltage, and a higher input power factor.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.