• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.626-630
• /
• 1999

A new integrated single-stage zero current switched(ZCS) quasi-resonant converter (QRC) for the power factor correction(PFC) converter is introduced in this paper. The power factor correction can be achieved by the discontinuous conduction mode(DCM) operation of an input current. The proposed converter has the characteristics of the good power factor, low line current harmonics, and tight output regulation. Furthermore, the ringing effect due to the output capacitance of the main switch can be eliminated by use of active clamp circuit.

• 대한전자공학회논문지SD
• /
• 제48권2호
• /
• pp.20-27
• /
• 2011

모바일 기기에 장착되는 CMOS 이미지 센서(CIS) 칩은 배터리 용량의 한계로 인해 저전력 소모를 요구한다. 본 논문에서는 전력소모를 줄일 수 있는 데이터 플립플롭 회로와 새로운 저전력 구조의 Single-Slope A/D Converter(SS-ADC)를 사용한 이미지 센서를 설계하여 모바일 기기에 사용되는 CIS 칩의 전력 소모를 감소시켰다. 제안하는 CIS는 $2.25um{\times}2.25um$ 면적을 갖는 4-Tr Active Pixel Sensor 구조를 사용하여 QVGA($320{\times}240$)급 해상도를 갖도록 설계되었으며 0.13um CMOS 공정에서 설계되었다. 실험 결과, CIS 칩 내부의 SS-ADC 는 10-b 해상도를 가지며, 동작속도는 16 frame/s 를 만족하였고, 전원 전압 3.3V(아날로그)/1.8V(Digital)에서 25mW의 전력 소모를 보였다. 측정결과로부터 제안된 CIS 칩은 기존 CIS 칩에 비해 대기시간동안 약 22%, 동작시간동안 약 20%의 전력이 감소되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.423-426
• /
• 1999

This paper describes a driving scheme of the series hybrid electric vehicle that we have developed. Both series HEV and parallel HEV are well known. We chose series HEV because it provides good energy efficiency in urban driving and operates in all-electric mode in performance. And engine-Generator is driven at constant speed with constant load to maintain the low emission. And the battery supplies power during high-load and receive energy during low-load

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.250-255
• /
• 2006

A low cost PDP sustain power supply is proposed based on flyback topology using Boundary Conduction Mode(BCM) to control input current regulation. This method guarantees DCM condition to regulate the input current harmonics under all load conditions. An excessive voltage stress due to the link voltage increase can be suppressed by removing link capacitor and adjusting transformer turns ratios, which makes it possible to be used for universal line applications. The proposed converter is tested with a 400W(200V-2A output) prototype circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.253-257
• /
• 2003

This paper presents the Development of Switching Power Supply for testing communication equipment. The communication equipment need many kinds of voltage(-48V,27V,12V,5V,3.3V), and in case of low voltage needs large current($10{\sim}20A$). The previous Linear Power Supply was very heavy, has low efficiency and poor power-factor for testing communication equipment. This development has good efficiency and high power-factor using switch mode power supply technique. This Development of Switching Power Supply is composed of eight converters. The principles of operation, feature, and design considerations are illustrated and verified through the experiment with 600W prototype.

• ETRI Journal
• /
• 제27권3호
• /
• pp.312-318
• /
• 2005

Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.37-42
• /
• 2016

전력가격의 상승으로 데이터센터의 운영비 부담이 늘어나는 가운데, 슈퍼컴퓨터에 저전력 프로세서를 사용하여 데이터센터의 전력소모를 감소시키는 연구가 활발하다. 일반적으로 모바일 기기 등의 운용환경을 기준으로 신뢰성 평가가 이루어지는 저전력 프로세서를 슈퍼컴퓨터에 사용하는 경우 상대적으로 가혹한 운용환경으로 인해 물리적, 기계적 신뢰성 문제가 발생할 수 있다. 이 논문은 슈퍼컴퓨터 운용 환경을 바탕으로 저전력 프로세서 패키지의 수명을 평가하였다. 먼저 문헌조사, 고장모드 및 치명도 분석을 통해 저전력 프로세서 패키지의 주요 고장원인으로 온도 사이클을 선정하였다. 부하-온도 관계를 확인하기 위해 단계적인 부하를 가하며 프로세서의 온도를 측정하였다. 가장 보수적인 운용조건을 가정하고 온도 사이클에 관련된 고장물리 모델을 이용한 결과 저전력 프로세서 패키지의 기대수명은 약 3년 이하로 예측되었다. 실험 결과를 바탕으로 저전력 프로세서 패키지의 기대수명을 향상하는 방법을 제시하였다.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1211-1222
• /
• 2017

In order to decrease the parameter sensitivity of deadbeat direct torque control (DB-DTC), an improved deadbeat direct torque control method for surface mounted permanent-magnet synchronous motor (SPMSM) drives is proposed. First, the track errors of the stator flux and torque that are caused by model parameter mismatch are analyzed. Then a sliding mode observer is designed, which is able to predict the d-q axis currents of the next control period for one-step delay compensation, and to simultaneously estimate the model parameter disturbance. The estimated disturbance of this observer is used to estimate the stator resistance offline. Then the estimated resistance is required to update the designed sliding-mode observer, which can be used to estimate the inductance and permanent-magnetic flux linkage online. In addition, the flux and torque estimation of the next control period, which is unaffected by the model parameter disturbance, is achieved by using predictive d-q axis currents and estimated parameters. Hence, a low parameter sensitivity DB-DTC method is developed. Simulation and experimental results show the validity of the proposed direct control method.

• 한국게임학회 논문지
• /
• 제6권4호
• /
• pp.63-70
• /
• 2006

본 논문에서는 모바일 3D 그래픽 가속기의 텍스쳐 데이터 메모리 지연시간을 감소하기 위해 사용하는 텍스쳐 캐쉬의 다양한 저전력 구조를 고찰하였다. 또한 텍스쳐 필터링 알고리즘에 따라서 가변적 전력 모드 전환 기준을 갖는 텍스쳐 캐쉬를 설계하였다. 각 텍스쳐 캐쉬 구조의 성능 비교 분석을 위하여 Quake 게임 엔진을 벤치마크로 사용한 트레이스 기반의 시뮬레이션을 수행하였다. 또한 저전력 텍스쳐 캐쉬 구조에 적합한 텍스쳐 필터링 알고리즘에 따라서 가변적 전력 모드 전환 기준을 갖는 알고리즘을 제안하고 시뮬레이션을 통하여 검증하였다.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.704-711
• /
• 2014

This paper proposes a combined fuzzy adaptive sliding-mode voltage controller (FASVC) for a three-phase UPS inverter. The proposed FASVC encapsulates two control terms: a fuzzy adaptive compensation control term, which solves the problem of parameter uncertainties, and a sliding-mode feedback control term, which stabilizes the error dynamics of the system. To extract precise load current information, the proposed method uses a conventional load current observer instead of current sensors. In addition, the stability of the proposed control scheme is fully guaranteed by using the Lyapunov stability theory. It is shown that the proposed FASVC can attain excellent voltage regulation features such as a fast dynamic response, low total harmonic distortion (THD), and a small steady-state error under sudden load disturbances, nonlinear loads, and unbalanced loads in the existence of the parameter uncertainties. Finally, experimental results are obtained from a prototype 1 kVA three-phase UPS inverter system via a TMS320F28335 DSP. A comparison of these results with those obtained from a conventional sliding-mode controller (SMC) confirms the superior transient and steady-state performances of the proposed control technique.