• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1567-1574
• /
• 2001

In order to operate an RPV safely it is necessary to keep the pressure-temperature (P-T) limit during the heatup and cooldown process. While the ASME Code provides the P-T limit curve for safe operation, this limit curve has been prepared under conservative assumptions In this paper the effects of conservative assumptions involved in the P-T limit curve specified in the ASME Code Sec. XI were investigated. Three different parameters the crack depth the cladding thickness and the cooling rate, were reviewed based on 3-D finite element analyses. Also the constraint effect on P-T limit curve generation was investigated based on J- T approach. It was shown that the crack depth and the constraint effect change the safe region in P-T limit curve significantly Therefore it is recommended to prepare a more precise P-T limit curve based on finite element analysis to obtain P-T limit for safe operation of an RPV.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.489-498
• /
• 2008

In general, deflection limit criteria of bridge design specifications have been considered based on static serviceability and structural stability. Dynamic serviceability induced from bridge vibration actually has not been included in the criteria. Thus, it is necessary for deflection limit to be considered in order to check dynamic service- ability on bridge vibration. In this study, The allowable displacement of Korea Railway Bridge Design Specifications is compared to the frequency domain comfort limit and analyzed france code and japanese code. Korea Railway Bridge Design Specifications is regulated based on the train speed. Such is because the vibration time duration is partly considered. but this criteria is not satisfied with comfort limit. and, it is estimated to be capable to provide deflection limit considering dynamic serviceability. In order to evaluate the dynamic serviceability of various types of railway bridges in current public were selected and their dynamic signals were measured. and the result of the bridge-train interaction analysis according to the changes in bridge stiffness was compared to the comfort limit to suggest the stiff-ness limit to the dynamic serviceability, which should conveniently be applied at the field.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.3 no.3
• /
• pp.98-103
• /
• 1979

The fatigue limit of an ion-nitrided steel was investigated experimentally and analytically. It is found that fatigue limit can singificantly be increased by ion-nitriding, and that the case depth is the most important parameter which determines the fatigue limit. The data indicate that fatigue limit increases with the case depth as well as the surface hardness of the nitrided steel. The fracrographs of the fracture surfaces taken by a scanning electron microscope show that the fisch-eye is located at the subsurface of failed specimens. Assuming that crack propagates from the subsurface inclusions, an analytical model is proposed to predict the fatigue limit. Taking into account the stress distrbution of a nitrided specimen, fatigue limit is predicted as a function of the case depth. The proposed semiemprical formula agrees satisfactorily with the experimental data obtained from rotating beam fatigue testing.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.97-103
• /
• 1997

Effects of fuel injection timing on the lean misfire limit of a sequential MPI SI engine has been investigated. To investigate the interaction of injection timing and intake flow characteristics, so called axial stratification phenomena, 4 kinds of different intake swirl port of the same combustion chamber geometry have been teated in a single cylinder engine test bench. And 2 kinds of fuel, gasoline and compressed natural gas(CNG), were used to see the effect of liquid fuel vaporization. Result shows that combination of port swirl and injection timing governs the lean misfire limit and lean misfire limit envelopes remain almost the same for a given ratio regardless of engine speed. It is also found that two phase flow has some effects on lean misfire limit.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1218-1228
• /
• 1997

The move limit strategy is used to avoid the excessive approximation in the structural optimization. The size of move limit has been obtained by engineering experience. Recently, efforts based on analytic methods are performed by some researchers. These methods still have problems, such as prematurity or oscillation of the move limit size. The existing methods usually control the bound of design variables based on the magnitude. Thus, they can not properly handle the configuration variables based on the geometry in the configuration optimization. In this research, the size of move limit is calculated based on the accuracy of approximation. The method is coded and applied to the two-point reciprocal quadratic approximation method. The efficiency is evaluated through examples.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1772-1777
• /
• 2007

This paper provides plastic limit loads of pipes with constant-depth, circumferential part-through surface cracks under combined pressure and bending. A key issue is to postulate discontinuous hoop stress distributions in the net-section. Validity of the proposed limit load solutions is checked against the results from three-dimensional (3-D) finite element (FE) limit analyses using elastic-perfectly plastic material behavior.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1836-1841
• /
• 2007

Based on three-dimensional (3-D) FE limit analyses, this paper provides plastic limit and TES(Twice-Elastic-Slope) loads for pipe bends under combined pressure and out-of-plane bending. The plastic limit loads are determined from FE limit analyses based on elastic-perfectly-plastic materials using the small geometry change option, and the FE limit analyses using the large geometry change option provide TES plastic loads. A wide range of parameters related to the bend geometry is considered. Based on the FE results, closed-form approximations of plastic limit and TES plastic load solutions for pipe bends under out-of-plane bending are proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.161-170
• /
• 2007

In general, deflection limit criteria of bridge design specifications would have been considered based on the static serviceability and structural stability. Dynamic serviceability induced from bridge vibration, as a comfort limit, actually has not been included in the criteria. Thus, it is necessary for dynamic serviceability to be considered in bridge vibration problems and for comfort limit on vibration to be needed for evaluating dynamic serviceability of bridges. In this paper, comfort limits of bridge structures considering the time duration exposed by vibration were examined with frequency and time dependent comfort limits, and they were evaluated by using the vibration signals measured from the existing bridges. Therefore, it is resulted that the time-dependent comfort limit considering the duration of vibration is an efficient estimate for evaluating dynamic serviceability of bridges.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.134-142
• /
• 1998

The effects of small hole defect size and effective case depth(ECD) on the four point bending fatigue limit of induction surface hardened S45C steel were investigated the fatigue limit evaluation of hardened materials is very difficult because of relations of the hardness gradient and residual stress. In this study, it was possible to characterize fatigue limit and fatigue life of induction surface hardened S45C steel in terms of the hole defect size and effective case depth(ECD) and quantitative evaluation of the fatigue limit with hole defects use Murakami's evaluation method and the range of evaluated values is a good accuracy compared with results.

• Kyungpook Mathematical Journal
• /
• v.54 no.2
• /
• pp.333-339
• /
• 2014

In this paper, we describe the characterizations of omega limit sets (= ${\omega}$-limit set) on $\mathbb{R}^2$ in detail. For a local real analytic flow ${\Phi}$ by z' = f(z) on $\mathbb{R}^2$, we prove the ${\omega}$-limit set from the basin of a given attractor is in the boundary of the attractor. Using the result of Jim$\acute{e}$nez-L$\acute{o}$pez and Llibre [9], we can completely understand how both the attractors and the ${\omega}$-limit sets from the basin.