• Journal of the Korean Statistical Society
• /
• v.34 no.3
• /
• pp.219-233
• /
• 2005

The 3-way balanced multi-level rotation design has been discussed (Park Kim and Kim, 2003), where the 3-way balancing is done on interview time, in monthly sample and rotation group and recall time. A greater advantage of 3-way balanced design is accomplished by an estimator. To obtain the advantage, we generalized previous generalized composite estimator (GCE). We call this as l-step GCE. The variance of the l-step GCE's of various characteristics of interest are presented. Also, we provide the coefficients which minimize the variance of the l-step GCE. Minimizing a weighted sum of variances of all concerned estimators of interest, we drive one set of the compromise coefficient of l-step GCE's to preserve additivity of estimates.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.4
• /
• pp.61-72
• /
• 2004

In this paper, we design sampling inspections and service capacities simultaneously for multi-products. Particularly, we extend Kim(2003) by introducing the fixed cost of providing services. We show that, due to the fixed cost considered, the cost function of a product is no longer linear or convex in terms of the level of service provision, and the total inspection is prefered to the small level of service capacity which results in high burden of the fixed cost. And we develop a simple framework to deal with this joint design problem for a product. Also we consider the problem of allocating the given number of the total service capacities among products. A dynamic programming algorithm is developed to determine the optimal allocation which minimizes the overall total cost of the system and the optimal allocation can be obtained with the considerably smaller computations than the total number of possible allocations. The results can be used to support planning decisions and to aid the joint design of inspections and service capacities for products.

• Journal of Power System Engineering
• /
• v.20 no.3
• /
• pp.29-35
• /
• 2016

Because of the severe service environment of the large marine vessel, the fatigue strength and its evaluation play an important role in design and maintenance of marine crankshaft. The aim of this work is to investigate the probability distribution of fatigue lives in crank throw forged steel and to develop the methodology for estimation of the probabilistic design fatigue strength. Detailed studies were performed on the constant amplitude axial loading fatigue test. The experiments were controlled by stress ratio of -1 and 15Hz frequency for each stress level. The considerable variability of fatigue life was observed in each stress level under rigidly controlled constant fatigue testing conditions. The fatigue life of crank throw forged steel was well followed the log-normal and Weibull distribution. In addition, it can be used for the estimation of probabilistic design fatigue strength by using the proposed methodology.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.93-99
• /
• 1999

The service level of Metro stations is affected by the design criteria such as platform area, width and length of stairways, and the number of turnstile, etc. The Korean station design process utilizes peak-hour volume as design volume. Hourly volume, however, can not explicitly account for the variation of traffic and consequently the variation of the level of service within the one-hour time period. Movements in various areas inside of stations are simulated with a queueing network under various operating conditions. A discrete simulation tool called SIMUL8 was utilized. Based on the results, peak volume for 15 minutes period was recommended as a preferred base volume over the peak-hour volume for station design purpose to realistically account for user delays under. Simulation runs also confirmed that escalators have positive effects on passenger processing capacity and on securing stability of passenger flows in stations.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.91-101
• /
• 2022

The 1995 Kobe earthquake caused a massive damage to the Port of Kobe. Therefore, it was pointed out that it was impossible to design port structures for Level II (Mw 6.5) earthquakes with quasi-static analysis and Allowable Stress Design methods. In Japan and the United States, where earthquakes are frequent, the most advanced design standards for port facilities are introduced and applied, and the existing seismic design standards have been converted to performance-based design. Since 1999, the Korean Port Seismic Design Act has established a definition of necessary facilities and seismic grades through research on facilities that require seismic design and their seismic grades. It has also established a performance-based seismic design method based on experimental verification. In the performance-based seismic design method of the breakwater proposed in this study, the acceleration time history on the surface of the original ground was subjected to a fast Fourier transform, followed by a filter processing that corrected the frequency characteristics corresponding to the maximum allowable displacement with respect to performance level of the breakwater and the filtered spectrum. The horizontal seismic coefficient for the equivalent static analysis considering the displacement was calculated by inversely transforming (i.e., subjected to an inverse fast Fourier transform) into the acceleration time history and obtaining the maximum acceleration value. In addition, experiments and numerical analysis were performed to verify the performance-based seismic design method of breakwaters suitable for domestic earthquake levels.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.1-12
• /
• 1999

A new algorithm of constructing binary decision diagram(BDD) for design verification of switch-level circuits is proposed in this paper. In the switch-level circuit, functions are characterized by serial and parallel connections of switches and the final logic values may have high-impedance and unstable states in addition to the logic values of 0 and 1. We extend the BDD to represent functions of switch-level circuits as acyclic graphs so called switch-level binary decision diagram (SLBDD). The function representation of the graph is in the worst case, exponential to the number of inputs. Thus, the ordering of decision variables plays a major role in graph sizes. Under the existence of pass-transistors and domino-logic of precharging circuitry, we also propose an input ordering algorithm for the efficiency in graph sizes. We conducted several experiments on various benchmark circuits and the results show that our algorithm is efficient enough to apply to functional simulation, power estimation, and fault-simulation of switch-level design.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.151-156
• /
• 2016

It has been constantly demanding for effective way to improve software development productivity and automation. In this paper, we did research to configure the component assets to reuse design information from the design phase domains based on the DMI. It is necessary abstracted information architecture of an independent platform development environment to reuse design information on the design stage. Also, It should be based on a well-designed to support the design architecture of the application domain. Therefore, in this paper, I want to use the DMI architecture that can be represented by formal level of architectural design information platform and application domain area. It is able to decomposition architecture asset with the part design information from the design phase composition or a high level of abstraction on DMI. Therefore, the metadata structure of the asset architecture will support a structure which can reuse the structure-based design of the domain areas.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.157-166
• /
• 2009

A network design problem (NDP) is to find a design parameter to optimize the performance of transportation system. This paper presents a modified NDP, called target-oriented NDP, which contains a target that we try to arrive in real world, and also proposes a solution algorithm. Unlike general NDP which seeks an optimal value to minimize or to maximize objective function of the system, in target-oriented NDP traffic manager or operator can set a target level prior and then try to find an optimal design variable to attain this goal. A simple example for mode choice problem is given to test the model.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.235-242
• /
• 2005

This study introduces the Reliability-Based Design Optimization (RBDO) to enhance the kinematic and compliance (K & C) characteristics of automotive suspension system. In previous studies, the deterministic optimization has been performed to enhance the K & C characteristics. Unfortunately, uncertainties in the real world have not been considered in the deterministic optimization. In the design of suspension system, design variables with the uncertainties, such as the bushing stiffness, have a great influence on the variation of the suspension performances. There is a need to quantify these uncertainties and to apply the RBDO to obtain the design, satisfying the target reliability level. In this research, design variables including uncertainties are dealt as random variables and reliability of the suspension performances, which are related the K & C characteristics, are quantified and the RBDO is performed. The RBD-optimum is compared with the deterministic optimum to verify the enhancement in reliability. Thus, the reliability of the suspension performances is estimated and the RBD-optimum, satisfying the target reliability level, is determined.

• Journal of Distribution Science
• /
• v.18 no.8
• /
• pp.65-74
• /
• 2020

Purpose: The purpose of study is to examine the effects of design thinking-based programs on creative potential, creativity and innovation behavior, as well as the mediating effect of creative potential and creativity. Research design, data and methodology: The study was conducted through a four-step process. First, the previous studies were investigated. Second, a total of three experts were reviewed to improve and supplement the program. Third, a workshop-based design thinking program was conducted four times. Fourth, the effectiveness of the program was reviewed through data analysis. Results: The design thinking-based program was found to have a statistically positive effect on creative potential, creativity, and innovation behavior. As another hypothesis of this study, by applying the design thinking-based program, it was statistically confirmed that creative potential has a direct, indirect effect, and a mediating effect on innovation behavior. Conclusions: These results provide usability for design thinking in terms of direction for creativity-based creative problem solving and innovation. Finally, design thinking can be used to develop and utilize new services and discover new ideas, especially improve the competitiveness of the company. In addition, it means that the level of innovation action can vary depending on the level of the individual's creative potential.