• 제목/요약/키워드: jitter measurement

검색결과 77건 처리시간 0.019초

음성신호의 Jitter 성분의 장시간 변화에 관한 통계적 분석 (Statistical analysis on long-term change of jitter component on continuous speech signal)

  • 조철우
    • 말소리와 음성과학
    • /
    • 제12권4호
    • /
    • pp.73-80
    • /
    • 2020
  • 본 연구에서는 연속음성에서의 장시간 jitter 성분 측정 방법에 대해 고찰하였다. 기존의 jitter측정방법으로는 지속 발성한 모음을 대상으로 변동성을 측정하는 방법을 주로 사용하여왔다. 문장음성 등 연속음성의 경우는 문장에 따른 운율정보의 영향으로 기존의 측정법으로는 왜곡이 발생하게 된다. 이에 연속 발성에 대해 운율정보의 피치 변동을 상쇄시키는 방법을 제안하고자 한다. 피치 변동을 제거하는 방법으로는 분석구간내에서의 피치 변동을 다항식 보간법에 의해 변동 경향을 대표하는 곡선을 구하고 그 곡선을 기준으로 변이를 제거하였다. 이후 변이가 제거된 피치의 궤적으로부터 jitter를 측정하는 방법을 적용하여 피치 주파수의 변동성을 측정하고 기존의 지속모음에 의한 측정 방법과 비교하였다. 제안한 방법의 효용성 측정을 위해 Kay Pentax MEEI DB의 음성 표본을 사용하였다. 통계분석 결과 제안된 방법에 의해 연속음성으로부터 측정한 jitter 값은 동일 화자의 지속모음으로부터 측정한 파라미터 값과 유사한 변동성을 보여 주었다.

An Adaptive Equalizer for High-Speed Receiver using a CDR-Assisted All-Digital Jitter Measurement

  • Kim, Jong-Hoon;Lim, Ji-Hoon;Kim, Byungsub;Sim, Jae-Yoon;Park, Hong-June
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권2호
    • /
    • pp.155-167
    • /
    • 2015
  • An adaptive equalization scheme based on all-digital jitter measurement is proposed for a continuous time linear equalizer (CTLE) preceding a clock and data recovery (CDR) in a receiver circuit for high-speed serial interface. The optimum equalization coefficient of CTLE is determined during the initial training period based on the measured jitter. The proposed circuit finds automatically the optimum equalization coefficient for CTLE with 20", 30", 40" FR4 channel at the data rate of 5 Gbps. The chip area of the equalizer including the adaptive controller is 0.14 mm2 in a $0.13{\mu}m$ process. The equalizer consumes 12 mW at 1.2 V supply during the normal operation. The adaptive equalizer has been applied to a USB3.0 receiver.

A Low-Jitter DLL-Based Clock Generator with Two Negative Feedback Loops

  • Choi, Young-Shig;Park, Jong-Yoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권4호
    • /
    • pp.457-462
    • /
    • 2014
  • This letter proposes a low-jitter DLL-based clock generator with two negative feedback loops. The main negative feedback loops suppress the jitter of DLL. The additional negative feedback loops suppress the delay-time variance of each delay stages. Both two negative feedback loops in a DLL results in suppressing the jitter of clock signal further. Measurement results of the DLL-based clock generator with two negative feedback loops fabricated in a one-poly six-metal $0.18{\mu}m$ CMOS process show 5.127-ps rms jitter and 47.6-ps peak-to-peak jitter at 1 GHz.

인공위성 반작용휠의 미소진동 측정, 해석 및 저감 기술 (Micro-Vibration Measurement, Analysis and Attenuation Techniques of Reaction Wheel Assembly in Satellite)

  • 오시환;이승우
    • 한국항공우주학회지
    • /
    • 제30권8호
    • /
    • pp.126-132
    • /
    • 2002
  • 인공위성의 각종 탑재체에 의해 발생하는 미소진동은 위성의 고정밀 지향도를 떨어뜨리고 고해상도 카메라를 탑재하고 있는 다목적 실용위성 같은 경우, 위성 영상의 해상도 및 분해능을 저하시킨다. 본 논문에서는 인공위성체 미소진동의 가장 큰 요인 중의 하나로 작용하는 반작용휠의 미소진동 측정 기술, 동특성 해석 및 모델링 기술을 소개하고 이의 진동 저감 방법 등을 모색하였다. 이러한 기술들을 토대로 하여 반작용휠과 유사한 동특성을 가지는 진동 발생기를 제작, 미소진동을 측정하였고 수동 감쇄 재료를 이용하여 이를 저감 시키는 실험을 수행하였다.

고밀도 디스크를 위한 신호 품질 평가 방법 (Signal qualification method for high density disk)

  • 박현수
    • 정보저장시스템학회논문집
    • /
    • 제1권1호
    • /
    • pp.53-57
    • /
    • 2005
  • In order to measure signal quality of optical disc such as CD or DVD, jitter is used traditionally. The signal attained from a disc by optical pick-up is processed by analog circuits. And then, binary signal can be obtained by using proper silcer. After the signal is changed into binary format, jitter is calculated as a time difference between the binary signal and the reference time. Jitter is used to express the signal quality. In this paper, a new method that is able to offer more precise measurement of the signal quality fur high density optical disc than the jitter is proposed. We named it LPSNR (Level Peak Signal to Noise Ratio). The relationship between bER (bit error rate) and LPSNR is shown in the paper.

  • PDF

Single-Shot LiDAR system을 이용한 Timing Jitter 분석 및 개선 방안 (Timing Jitter Analysis and Improvement Method using Single-Shot LiDAR system)

  • 한문현;최규동;송민협;서홍석;민봉기
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 추계학술대회
    • /
    • pp.172-175
    • /
    • 2016
  • 시간 정보를 이용하여 거리 측정 및 물체 탐지 등에 사용되고 있는 Time of Flight(ToF) LiDAR(Light Detection And Ranging) 기술이 자율 주행 자동차, 지형 분석 같이 보다 정밀 측정이 필요한 분야에 응용되면서 ToF 시간 정보 추출에 대한 중요성이 높아지고 있다. 본 논문에서는 ToF 시간 정보의 정확성의 지표로 timing jitter를 사용하였고, 약 31M free space 환경에서 1.5um 파장의 MOPA LASER와 InGaAs Avalanche Photodiode(APD)로 이루어진 Single-Shot LiDAR system(SSLs)을 통해 측정 및 분석하였다. 또한 SSLs를 통해 측정된 데이터에 curve fitting 방법인 spline interpolation과 반복 측정된 피크 데이터를 이용하는 multiple-shot averaging 방법을 적용하여 timing jitter 개선결과를 제시하였다.

  • PDF

장애음성의 음향학적 분석에서 유성음 문장의 임상적 유용성에 관한 연구 (A study on the clinical utility of voiced sentences in acoustic analysis for pathological voice evaluation)

  • 김지성
    • 한국음향학회지
    • /
    • 제42권4호
    • /
    • pp.298-303
    • /
    • 2023
  • 본 연구는 장애음성의 평가에 사용되는 연속발화과제로서 유성음 문장의 임상적 유용성을 알아보기 위한 것이다. 이를 위해, 모음연장발성과제의 음향학적 측정치인 주파수 변동률(jitter percent, jitter), 진폭 변동률(shimmer percent, shimmer), 소음대배음비(Noise to Harmonic Ratio, NHR)와 유성음으로만 이루어진 연속발화과제의 음향학적 측정치로 캡스트럼 분석 측정치인 켑스트럼 피크 현저성(Cepstral Peak Prominence, CPP), 저주파수대고주파수 스펙트럼비(Low/High spectral ratio, L/H ratio)의 상관을 분석하였다. 음성장애 환자 65명을 대상으로 수집된 자료를 분석한 결과, 유성음 문장의 음향학적 측정치인 CPP와 모음연장발성의 측정치인 jitter(r = -.624, p = .000), shimmer (r = -.530, p = .000), NHR(r = -.469, p = .000) 간에 유의한 상관이 나타났다. 이는 유성음 문장의 캡스트럼 측정치가 '연속발화 과제의 변동률 기반 분석 불가능', '분석구간과 길이에 따른 결과차이' 등 언어재활 임상현장이 가지고 있는 장애음성의 음향학적 분석의 제한에 대한 대안으로 유용하게 사용될 수 있음을 시사한다.

VoIP 망에서의 QoS 성능측정에 관한 연구 (A Study of Performance Measurement of QoS on VoIP Networks)

  • 박진삼;민상원
    • 한국통신학회논문지
    • /
    • 제34권4B호
    • /
    • pp.387-393
    • /
    • 2009
  • 본 논문에서는 VoIP 서비스를 사용하는데 있어서 IP 망에서 음성품질을 저해시키는 요소들을 Emulator를 통해 실험함으로써 음성품질에 영향을 미치는 요소에 대해 분석하였다. 그리고 QoS 분석에서는 실제 망 환경에서 겪을 수 있는 영향요소들에 대한 실측치를 반영하여 망 품질에 대한 망상태의 변화를 분석하였다. 망 품질의 가장 큰 영향을 주는 Delay, Jitter, 패킷손실에 대해 실측한 데이터는 IP망에서의 고품질의 VoIP 서비스를 제공하는 기반이 될 것으로 기대한다.

음성의 준주기적 현상 분석 및 구현에 관한 연구 (Analysis and synthesis of pseudo-periodicity on voice using source model approach)

  • 조철우
    • 말소리와 음성과학
    • /
    • 제8권4호
    • /
    • pp.89-95
    • /
    • 2016
  • The purpose of this work is to analyze and synthesize the pseudo-periodicity of voice using a source model. A speech signal has periodic characteristics; however, it is not completely periodic. While periodicity contributes significantly to the production of prosody, emotional status, etc., pseudo-periodicity contributes to the distinctions between normal and abnormal status, the naturalness of normal speech, etc. Measurement of pseudo-periodicity is typically performed through parameters such as jitter and shimmer. For studying the pseudo-periodic nature of voice in a controlled environment, through collected natural voice, we can only observe the distributions of the parameters, which are limited by the size of collected data. If we can generate voice samples in a controlled manner, experiments that are more diverse can be conducted. In this study, the probability distributions of vowel pitch variation are obtained from the speech signal. Based on the probability distribution of vocal folds, pulses with a designated jitter value are synthesized. Then, the target and re-analyzed jitter values are compared to check the validity of the method. It was found that the jitter synthesis method is useful for normal voice synthesis.

WCDMA 단말 모뎀을 위한 개선된 SIR 측정 알고리즘 설계 (Design of an enhanced SIR measurement algorithm for WCDMA mobile station Modem)

  • 한정수;도주현;최형진
    • 한국통신학회논문지
    • /
    • 제30권2A호
    • /
    • pp.51-60
    • /
    • 2005
  • 본 논문에서는 WCDMA(Wideband Code Division Multiple Access) 단말 모뎀을 위한 개선된 SIR 측정 알고리즘을 제안한다. 제안된 알고리즘은 속도 적응형 IIR 타입의 channel estimator를 적용함으로써 DPCH(Dedicated Physical Channel)의 채널 보상으로 인한 처리 지연을 최소화하였으며, 파일럿 채널인 CPICH(Common Pilot Channel)를 사용하여 페이딩 채널 환경에서 발생하는 신호 전력 감쇄를 보상함으로써 페이딩 환경에서 SIR 측정시 발생하는 SIR 측정 오차를 대폭 감소시켰다. 또한 fading의 변화를 적절히 반영할 수 있도록 IIR 필터를 신호 전력 및 간섭 전력 측정 시에 추가함으로써 SIR 측정에 대한 안정도를 향상시켰다. 제안된 알고리즘과 기존의 SIR 측정 알고리즘과의 성능 비교를 통하여 무선 이동 채널, 특히 고속 이동체 환경에서 제안된 알고리즘의 측정된 SIR의 mean은 최대 약 8dB, jitter는 약 2dB의 향상된 우수한 성능을 보임을 입증하였다.