• Phonetics and Speech Sciences
• /
• v.12 no.4
• /
• pp.73-80
• /
• 2020

In this study, a method for measuring the jitter component in continuous speech is presented. In the conventional jitter measurement method, pitch variabilities are commonly measured from the sustained vowels. In the case of continuous speech, such as a spoken sentence, distortion occurs with the existing measurement method owing to the influence of prosody information according to the sentence. Therefore, we propose a method to reduce the pitch fluctuations of prosody information in continuous speech. To remove this pitch fluctuation component, a curve representing the fluctuation is obtained via polynomial interpolation for the pitch track in the analysis interval, and the shift is removed according to the curve. Subsequently, the variability of the pitch frequency is obtained by a method of measuring jitter from the trajectory of the pitch from which the shift is removed. To measure the effects of the proposed method, parameter values before and after the operations are compared using samples from the Kay Pentax MEEI database. The statistical analysis of the experimental results showed that jitter components from the continuous speech can be measured effectively by proposed method and the values are comparable to the parameters of sustained vowel from the same speaker.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.155-167
• /
• 2015

An adaptive equalization scheme based on all-digital jitter measurement is proposed for a continuous time linear equalizer (CTLE) preceding a clock and data recovery (CDR) in a receiver circuit for high-speed serial interface. The optimum equalization coefficient of CTLE is determined during the initial training period based on the measured jitter. The proposed circuit finds automatically the optimum equalization coefficient for CTLE with 20", 30", 40" FR4 channel at the data rate of 5 Gbps. The chip area of the equalizer including the adaptive controller is 0.14 mm2 in a $0.13{\mu}m$ process. The equalizer consumes 12 mW at 1.2 V supply during the normal operation. The adaptive equalizer has been applied to a USB3.0 receiver.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.457-462
• /
• 2014

This letter proposes a low-jitter DLL-based clock generator with two negative feedback loops. The main negative feedback loops suppress the jitter of DLL. The additional negative feedback loops suppress the delay-time variance of each delay stages. Both two negative feedback loops in a DLL results in suppressing the jitter of clock signal further. Measurement results of the DLL-based clock generator with two negative feedback loops fabricated in a one-poly six-metal $0.18{\mu}m$ CMOS process show 5.127-ps rms jitter and 47.6-ps peak-to-peak jitter at 1 GHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.126-132
• /
• 2002

Jitter induced from several payloads on-board satellites degrade the performance of pointing accuracy and attenuate the resolving power of highly-precise camera image such as KOMPSAT II. In this paper, we introduce a micro-vibration measurement technique, analysis of dynamic characteristics, and modeling method for a reaction wheel assembly which is one of the major sources of jitter in satellites and an effective vibration reduction techniques are considered. Based on these techniques, vibration measurement and passive control were performed with an micro-vibration generator which was designed to have similar dynamic performances with an actual reaction wheel assembly above 50Hz.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.53-57
• /
• 2005

In order to measure signal quality of optical disc such as CD or DVD, jitter is used traditionally. The signal attained from a disc by optical pick-up is processed by analog circuits. And then, binary signal can be obtained by using proper silcer. After the signal is changed into binary format, jitter is calculated as a time difference between the binary signal and the reference time. Jitter is used to express the signal quality. In this paper, a new method that is able to offer more precise measurement of the signal quality fur high density optical disc than the jitter is proposed. We named it LPSNR (Level Peak Signal to Noise Ratio). The relationship between bER (bit error rate) and LPSNR is shown in the paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.172-175
• /
• 2016

Time of Flight(ToF) LiDAR(Light Detection And Ranging) technology has been used for distance measurement and object detection by measuring ToF time information. This technology has been evolved into higher precision measurement field such like autonomous driving car and terrain analysis since the retrieval of exact ToF time information is of prime importance. In this paper, as a accuracy indicator of the ToF time information, timing jitter was measured and analyzed through Single-Shot LiDAR system(SSLs) mainly consisting of 1.5um wavelength MOPA LASER, InGaAs Avalanche Photodiode(APD) at 31M free space environment. Additionally, we applied spline interpolation and multiple-shot averaging method on measured data through SSLs to improve ToF timing information.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.298-303
• /
• 2023

This study aimed to investigate the clinical utility of voiced sentence tasks for voice evaluation. To this end, we analyzed the correlation between perturbation-based acoustic measurements [jitter percent (jitter), shimmer percent (shimmer), Noise to Harmonic Ratio (NHR)] using sustained vowel phonation, and cepstrum-based acoustic measurements [Cepstral Peak Prominence (CPP), Low/High spectral ratio (L/H ratio)] using voiced sentences. As a result of analyzing data collected from 65 patients with voice disorders, there was a significant correlation between the CPP and jitter (r = -.624, p = .000), shimmer (r = -.530, p = .000), NHR (r = -.469, p = .000).This suggests that the cepstrum measurement of voiced sentences can be used as an alternative to the analysis limitations of the pathological voice such as not possible perturbation-based acoustic measurement, and result difference according to the analysis section.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.387-393
• /
• 2009

In this paper, we have considered the network performance of the VoIP service with the measurement by an emulator, and analyzed the major factors to affect its performance. Also, we have used the measured values to investigate the traffic variations, where their values were observed in the commercial operated network after the delay, jitter and packet loss, and loss compensation methods were applied as the dominant elements. It is expected that our presented results will be a good data to provide the high-quality of voice service in the Internet.

• Phonetics and Speech Sciences
• /
• v.8 no.4
• /
• pp.89-95
• /
• 2016

The purpose of this work is to analyze and synthesize the pseudo-periodicity of voice using a source model. A speech signal has periodic characteristics; however, it is not completely periodic. While periodicity contributes significantly to the production of prosody, emotional status, etc., pseudo-periodicity contributes to the distinctions between normal and abnormal status, the naturalness of normal speech, etc. Measurement of pseudo-periodicity is typically performed through parameters such as jitter and shimmer. For studying the pseudo-periodic nature of voice in a controlled environment, through collected natural voice, we can only observe the distributions of the parameters, which are limited by the size of collected data. If we can generate voice samples in a controlled manner, experiments that are more diverse can be conducted. In this study, the probability distributions of vowel pitch variation are obtained from the speech signal. Based on the probability distribution of vocal folds, pulses with a designated jitter value are synthesized. Then, the target and re-analyzed jitter values are compared to check the validity of the method. It was found that the jitter synthesis method is useful for normal voice synthesis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.51-60
• /
• 2005

In this paper, we propose an enhanced SIR measurement algorithm for WCDMA mobile station modem. The proposed algorithm minimizes processing delay by applying velocity estimation-based channel estimator with IIR filter and reduces measured SIR offset by compensating attenuated signal power by using pilot channel(CPICH) in fading channel environment. To improve stability of SIR measurement, we also adopt an IIR filter which can properly reflect variation of fading channel in signal and interference power measurement. We prove that the proposed algorithm outperforms conventional SIR measurement algorithm in mean and jitter of measured SIR. Computer simulation shows that performance results using the proposed algorithm have improvement of approximately 8dB for measured mean and 2dB for measured jitter in the wireless mobile channel, especially in fast mobile speed environment.