• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.5
• /
• pp.30-35
• /
• 1993

We have investigated microwave dielectric properties of TiO$_{2}$ added (Pb$_{1-x}$Ca$_{x}$)ZrO$_{3}$ Ceramics with x=0.33, 0.35, and 0.37 sintered at 1400$^{\circ}C$ for 2 h. For additions of up to 3wt% of TiO$_{2}$ in (Pb$_{0.63}$ Ca$_{0.37}$)ZrO$_{3}$ (x=0.37), TiO$_{2}$ was completely soluble in (Pb, Ca)ZrO3 phase and did not affect the grain size of ceramics. Dielectric constant and temperature coefficient of resonant frequency increased due to the formation of solid solution, whereas Q value decreased linearly as TiO$_{2}$ increased up to 1 wt%. However, the dielectric loss was very high as TiO$_{2}$ exceeded 2 wt%. It was also shown that as Ca ion content in 0.5 wt% TiO$_{2}$ added (Pb$_{1-x}$,Ca$_{x}$)ZrO$_{3}$ decreased from x=0.37 to x=0.33, dielectric constant increased and Q value decreased.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.4
• /
• pp.156-162
• /
• 2005

Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electro-plating for MEMS devices. The iron content of the deposits was changed by varying the nickel/iron ion ratio in the electrolyte. X-ray diffraction (XRD) analysis was applied for measuring the strength of the texture and grain size of the deposits. The nickel/iron atom ratio of the deposits was analyzed by EDS. The hardness of the alloys was evaluated by Vickers hardness indenter. The internal stress of the deposits was measured by Thin Film Stress Measurement using Stoney's formula. Surface morphology and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The results of this study revealed that at a grain size of approximately $17\~24$nm the hardness, internal stress and roughness depend strongly on the iron content. With increasing the iron content, the hardness and internal stress of the deposits increased. An excellent correlation between the increase in the internal stress and the loss of (200) texture was found.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.79-88
• /
• 1995

The electrostatic precipitation of Auto- Bias has the advantages of a little of power consumption by the voltage to apply only at ionizer and the prevention of fire danger by current flow over. As this ionizer wire was used WXN- Pt material of diameter 90$\mu $m, that improved ion efficiency and safety, simplified a existing source of electric power by induced Auto- Bias voltage. Also, the new type collector used electric conductivity- film wag superior a electric safety and dust collection efficiency and was possible to wash it by water. As a experiment result of this Auto- Bias electrostatic collector, the induced Auto- Bias voltage by appling D.C 4.0∼6.0kV at ionizer was 1.3∼2.3kV and then the power consumption by applied voltage was 8- l8W. The pressure loss of collector by the amount of flowing was 6.1 OmmH$_{2}$O in 300m$^{3}$/hr and showed a safe state of the dust collection. The collection efficiency by particle size was 65.1-95.8% in 0.5∼5.0$\mu $m. After corona discharge of ionizer, the remains ozone concentration was found much lower than that of ACGIH or air pollution criteria in Korea.

• Mass Spectrometry Letters
• /
• v.1 no.1
• /
• pp.29-32
• /
• 2010

Cross reacting antibodies can cause an overestimation of the results of immunoassays. Therefore, alternative methods are needed for the accurate quantification of steroids. Gas chromatography combined with isotope-dilution mass spectrometry (GC-IDMS) is developed to quantify urinary active androgens, testosterone, epitestosterone and dihydrotestosterone, which are clinically relevant androgens to both hair-loss and prostate diseases. The method devised involves enzymatic hydrolysis with $\beta$-glucuronidase, solid-phase extraction, liquid-liquid extraction using methyl tert-butyl ether and subsequent conversion to pentafluorophenyldimethylsilyl-trimethylsilyl (flophemesyl-TMS) derivatives for sensitive and selective analysis in selected-ion monitoring mode. Flophemesyl-TMS derivatization not only eliminates matrix interference but also has a good peak resolution within a 6 min-run. A selective and sensitive GC technique with flophemesyl-TMS derivatives also allows accurate quantitative analysis of three active androgens when combined with IDMS. The limit of quantification of the three analytes was <50 pg/mL, and extraction recoveries ranged from 91.9 to 102.1%. The precision and accuracy were 1.2~6.5% and 89.0~106.7%, respectively. This GC-IDMS method can be useful for evaluating the drug efficacy and monitoring the biological processes responsible for male-pattern baldness and prostate diseases.

• Journal of Mechanical Science and Technology
• /
• v.19 no.8
• /
• pp.1544-1553
• /
• 2005

In this article, a micro cantilever array actuated by PZT films is designed and fabricated for micro fluidic systems. The design features for maximizing tip deflections and minimizing fluid leakage are described. The governing equation of the composite PZT cantilever is derived and the actuating behavior predicted. The calculated value of the tip deflection was 15 ${\mu}m$ at 5 V. The fabrication process from SIMOX (Separation by oxygen ion implantation) wafer is presented in detail with the PZT film deposition process. The PZT films are characterized by investigating the ferroelectric properties, dielectric constant, and dielectric loss. Tip deflections of 12 ${\mu}m$ at 5 V are measured, which agreed well with the predicted value. The 18 ${\mu}l/s$ leakage rate of air was observed at a pressure difference of 1000 Pa. Micro cooler is introduced, and its possible application to micro compressor is discussed.

• Journal of Microbiology
• /
• v.43 no.6
• /
• pp.561-568
• /
• 2005

A newly-isolated thermophilic strain of the zygomycete fungus Rhizomucor pusillus 13.36 produced highly active dextrinogenic and saccharogenic enzymes. Cassava pulp was a good alternative substrate for amylase production. Dextrinogenic and saccharogenic amylases exhibited optimum activities at a pH of 4.0-4.5 and 5.0 respectively and at a temperature of $75^{\circ}C$. The enzymes were highly thermostable, with no detectable loss of saccharogenic or dextrinogenic activity after 1 hand 6 h at $60^{\circ}C$, respectively. The saccharogenic activity was inhibited by $Ca^{2+}$ while the dextrinogenic was indifferent to this ion. Both activities were inhibited by $Fe^{2+}\;and\;Cu^{2+}$ Hydrolysis of soluble starch by the crude enzyme yielded $66\%$ glucose, $19.5\%$ maltose, $7.7\%$ maltotriose and $6.6\%$ oligosaccharides.

• The Korean Journal of Food & Health Convergence
• /
• v.4 no.4
• /
• pp.18-25
• /
• 2018

Proteins play a key role in many functions such as metabolic activity, differentiation, as cargos and cell fate regulators. It is necessary to know about the markers involved in male fertility in order to develop remedies for the treatment of male infertility. But, the role of the proteins is not limited to particular function in the biological systems. Some of the proteins act as ion channels such as catsper and proteins like Nanos acts as a translational repressor in germ cells and expressed in prenatal period whose role in male fertility is uncertain. Rbm5 is a pre mRNA splicing factor necessary for sperm differentiation whose loss of function results deficit in sperm production. DEFB114 is a beta defensin family protein necessary for sperm motility in LPS challenged mice where as TEX 101 is a plasma membrane specific germ cell protein whose function is not clearly known u to now. Gpr56 is another adhesion protein whose null mutation leads to arrest of production of pups in rats. Amyloid precursor protein role in Alzheimer's disease is already known but it plays an important role in male fertility also but its function is uncertain and has to be considered while targeting APP during the treatment of Alzheimer's disease. The study on amyloid precursor protein in male fertility is a novel thing but requires further study in correlation to alzheimer's disease.

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.88-96
• /
• 1990

The purpose of this study was to investigate the fluoride release and solubility of glass ionomer cement associated with three pH media. For this study, GC Fuji II discs (20.0mm in diameter ${\times}$ 1.5mm thick) were immersed in pH 4.0 lactic acid, pH 7.0 distilled water and pH 10.0 KOH solutions for 1, 7, 14 and 28 days. The amount of fluoride release from the cement into three pH media were measured by fluoride specific ion electrode and the solubility was measured by weight loss of discs. The results were as follows: 1. The lower was the pH of media, the more was the amount of release of fluoride. 2. The amount of fluoride release was increased with time lapse. 3. After I day, the solubility was the highest, and after 7 days that was the least. 4. The lower was the pH of media, the more was the solubility, but there was no statistical difference in solubility according to the pH change.

• Archives of Pharmacal Research
• /
• v.29 no.2
• /
• pp.165-171
• /
• 2006

Osteoarthritis is thought to be induced by the ageing-related loss of homeostatic balance between degeneration and repair mechanism around cartilage tissue in which inflammatory mediators such as reactive oxygen species, cytokines and prostaglandins are prone to overproduction under undesirable physiological conditions. Phlorotannins are unique polyphenolic compounds bearing dibenzo-1,4-dioxin skeleton which are not found in terrestrial plants but found only in some brown algal species such as Ecklonia and Eisenia families. Phlorotanninrich extracts of Ecklonia cava including LAD103 showed significant antioxidant activities such as DPPH radical scavenging, ferric ion reduction, peroxynitrite scavenging, and inhibition of LDL oxidation, indicating their possible antioxidative interference both in onset and downstream consequences of osteoarthritis. LAD103 also showed significant down regulation of $PGE_2$ generation in LPS-treated RAW 246.7 cells, and significant inhibition of human recombinant interleukin-$1{\alpha}$-induced proteoglycan degradation, indicating its beneficial involvement in pathophysiological consequences of osteoarthritis, the mechanism of which needs further investigation. Since LAD103 showed strong therapeutic potentials in arthritic treatment through several in vitro experiments, it is highly encouraged to perform further mechanistic and efficacy studies.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.633-638
• /
• 2007

The setting time of alkali activated slag cement tends to be much faster than ordinary Portland cement, and its compressive strength had been higher from the 1 day but became lower than that of the cement on the 28 days. According to the results of the surface observation, weight loss, compressed strength, and erosion depth tests on the sulphuric acid solution. It has been drawn that alkali activated slag cement has a higher sulphate resistance than ordinary Portland cement, and in particular, the alkali activated slag cement added 5 wt% alumina cement has little deterioration on the sulphuric acid solution. The reason why the alkali activated slag cement has higher sulphate resistance than other hardened cement pastes is that it has no $Ca(OH)_2$ reactive to sulphate ion, and there is little $CaSO_4{\cdot}2H_2O$ production causing volume expansion, unlike other pastes. And it is supposed that $Al(OH)_3$ hydrates with high sulphate resistance, which is produced by adding the alumina cement increases the sulfate resistance.