• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.684-686
• /
• 1998

This paper consider fuzzy control of a single-inverted pendulum attached to the tip end of a rotating arm driven by a direct driven motor. Control objectives stabilization of the pendulum at the upright position and regulation of the arm at an arbitrary specified position. Fuzzy control is an effective method to achieve multiple control objectives in control of nonlinear systems. In this paper, fuzzy logic control is proposed to obtain increased control performance and stability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2983-2985
• /
• 1999

This paper presents the attitude control of the double inverted pendulum with compliant joint. The biped robot with compliant ankle joint instead of a motor have a good contact between it's sole and ground in the uneven ground. The compliant ankle joint proposed here is composed of springs and mechanical constraint. The lower link is hinged on the plate to free for rotation in the vertical plate. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The algorithm for controlling a proposed inverted pendulum is nonlinear feedback controller. Simulation with mathematical model are conducted to show the validity of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1901-1905
• /
• 2004

A controller designed by CDM for a servo type system which is an augmented system constructed from a rotational inverted pendulum with an integrator added to its arm, is presented in this paper. In order to be able to apply the CDM concept, the augmented system must be linearized and converted into controllable canonical form. Then, the controller consisting of the state feedback gain matrix and an integral gain in the sense of CDM can be obtained. This shows that design procedure for the proposed controller is easy. The experimental results obtained from the rotational inverted pendulum controlled by the proposed controller show that the system response has no steady-state error, however, the oscillation amplitude of the arm angle is still significant. Therefore, in this paper, the friction compensation using Coulomb friction with stiction is also added to the controller. The oscillation amplitude of the arm angle that can be reduced remarkably is also shown in the experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1470-1473
• /
• 2003

In this paper the networked control systems (NCS) problem is discussed where plants and controllers are distributed and interconnected by a common network. NCS is designed with LQ regulator and applied to an inverted pendulum accounting for the multiple time delays. We are to deals with a networked control system with a single controller, multiple sensors and multiple actuators. Since these parts are distributed, they are interconnected by communication networks. An NCS with LQ regulator is designed and applied to an inverted pendulum as a benchmark plant to check its performance under time delays induced by the network. Network induced delays are composed of two parts. One is the delay from controller to plant, and another is from plant to controller. They are assumed to be constant in this paper, and the plant and controller are discretized. To apply the LQ regulator the NCS model is transformed to a standard model with delayed states as state variable. And real network induced delay is measuring in TCP/IP network assuming that two delays are constant.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.1065-1074
• /
• 2000

A robust nonlinear $H_2$/$H_{\infty}$ control method for a parallel inverted pendulum with structured perturbation and dry friction is proposed. By the random input describing function techniques, the nonlinear dry friction is approximated into the quasi-linear system. Introducing the quadratic robustness theorem, the robust $H_2$/$H_{\infty}$ control system is constructed for the quasi-linear perturbed system. But it is difficult to design a controller due to the nonlinear correction term in Riccati equation. With some transformations on the Riccati equation containing nonlinear correction term, the design of the robust nonlinear controller can be done easily. Hence when the stiffness and mass of the parallel inverted pendulum vary in certain ranges, the proposed control scheme has the robustness for both the structured perturbation and dry friction. The results of computer simulation show the effectiveness of our proposed control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2116-2119
• /
• 2005

Inverted pendulum is a classical example and a famous tool for testing the effectiveness of many control schemes. Owing to their nonlinearity and unstable characteristic, a controller development either for swinging-up or stabilizing its upright position had been a great interest of many researchers. In this paper, the swinging-up control of the inverted pendulum using energy control will be presented. However, the saturation function in its control law could harm the experimental equipments. In addition, this swinging-up method did not consider limited sector of the arm angle to avoid another hazard, for instance, the twisted cable in the apparatus. Therefore, in this paper the position control of the arm angle using simple PD control in accordance with the energy control is proposed. Consequently, the limited arm sector angle can be achieved and the saturation function can also be replaced effectively by the PD control.

• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.228-236
• /
• 2012

본 논문에서는 빠르고 조작이 간편한 이동 수단인 이륜 역진자 로봇을 기존의 방법보다 더욱 안정적으로 밸런싱하기 위한 제어기를 설계하였다. 먼저 이륜 역진자 로봇의 제어기를 퍼지제어 구조로 선택하고, 지정된 3명의 사용자 무게에 따라 적절한 소속함수 요소 값들을 시행착오적으로 구하였다. 임의의 무게에 대한 적절한 퍼지 소속함수 요소 값을 구하기 위해 앞의 3명의 무게에 따른 퍼지 소속함수 요소 값들을 신경회로망으로 튜닝한 뒤 퍼지 제어기에 적용하여 보다 안정적인 제어가 가능하도록 제어기를 설계하였다. 설계된 제어기를 시뮬레이션 하여본 결과, 기존의 퍼지 제어기에 비해서 본 논문에서 제안한 신경회로망으로 튜닝한 퍼지제어기가 보다 안정적인 제어가 가능함을 확인할 수 있었다.

• 한국통신학회논문지
• /
• 제18권3호
• /
• pp.372-384
• /
• 1993

로보트 제어와 로케트의 자세 제어에 관련하여 도립 진자 시스템은 제어 이론과 응용면에서 흥미 있는 문제이다. 일반적으로 도립 진자 시스템을 제어하기 위하여 소신호 모델에 의한 근사화 모델이 사용되었다. 본 논문에서는 미분 다양체 이론을 기초로 한 비선형 제어 이론을 도입 진자 시스템에 적용하고자 한다. 먼저 비선형 모델을 비선형 상태 궤환을 이용하여 근사 선형화 모델로 변환시키고, 선형화 모델에 극점 배치를 통하여 선형 제어기를 설계하였다. 컴퓨터 시뮬레이션을 통하여 제안된 기법을 Tayler 급수의 3차 선형화모델과 비교하였다.

• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.546-551
• /
• 2011

Tilt sensor is required to control the attitude of the biped robot when it walks on an uneven terrain. Vision sensor, which is used for recognizing human or detecting obstacles, can be used as a tilt angle sensor by comparing current image and reference image. However, vision sensor alone has a lot of technological limitations to control biped robot such as low sampling frequency and estimation time delay. In order to verify limitations of vision sensor, experimental setup of an inverted pendulum, which represents pitch motion of the walking or running robot, is used and it is proved that only vision sensor cannot control an inverted pendulum mainly because of the time delay. In this paper, to overcome limitations of vision sensor, Kalman filter for the multi-rate sensor fusion algorithm is applied with low-quality gyro sensor. It solves limitations of the vision sensor as well as eliminates drift of gyro sensor. Through the experiment of an inverted pendulum control, it is found that the tilt estimation performance of fusion sensor is greatly improved enough to control the attitude of an inverted pendulum.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.432-439
• /
• 2012

본 논문에서 이륜 역진자 로봇의 밸런싱에 사용되고 있는 기존 PD 제어기를 대신하여 신경회로망 학습을 통해 향상된 PD 제어기를 이륜 역진자형 이동로봇에 적용하여 실험하고 성능을 검증하였다. 먼저 제어실험에 사용할 이륜 역진자 로봇시스템을 구축하고 나서 기존의 PD 제어기를 사용하여 사용자 몸무게에 따라 시행착오적으로 이득값을 구해 로봇을 밸런싱시켰다. 그리고 시행착오적으로 구한 이득 값을 신경회로망 학습을 통해 일반화시켜 몸무게에 따라 일반화된 PD 이득 값을 가지는 제어기를 구현하였다. 이렇게 구현된 제어기가 기존의 PD 제어기보다 안정적 제어 측면에서 더 유리함을 실험적으로 확인할 수 있었다.