• Journal of Environmental Health Sciences
• /
• v.40 no.6
• /
• pp.492-501
• /
• 2014

Objectives: The purpose of this study was to assess the validity of self-reported cigarette smoking status and investigate factors associated with the accuracy self-reported and measured urinary cotinine in Korean adults. Methods: We used data from the $1^{st}$ Korean National Environmental Health Survey (2009-2011) among adults aged ${\geq}19$ years (N=6,246). The survey examined self-reported smoking status, and urinary cotinine was regarded as the biomarker of exposure to tobacco smoke. Urinary cotinine was analyzed using a gas chromatography-mass spectrometry (GC/MS) and data analysis was conducted using IBM SPSS version 20.0, which uses the sample weight and calculates variance estimates to adjust for the unequal probability of selection into the survey. Results: We calculated a cut-off point (53.3 ug/L) by using a ROC (Receiver Operating Characteristic) curve. The smoking prevalence was 24.6% based on self-reported data and 28.2% based on urinary cotinine concentrations. When we assessed the agreement between self-reported and urinary cotinine, we found an average agreement of 97.7% among self-reported smokers and 94.5% among self-reported non-smokers. Among self-reported smokers, factors affected the discrepancy were age, household economic status and average number of cigarettes smoked per day. On the other hand, gender, former smoking experience, and exposure to SHS (second hand smoke) were associated with discrepancies among self-reported non-smokers. Conclusion: These results suggest that self-reported data on smoking status provide a valid estimate of actual smoking status. In future research, we will conduct a continuous monitoring study for reliability verification of the data to reduce potential interpretation errors.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.179-186
• /
• 2010

The oxidative metabolism of ibuprofen in healthy male urine collected at 3, 6, 9, 12 and 15 h after oral administration of ibuprofen was studied by GC/MS assay. To detect conjugated metabolites of ibuprofen, urine sample was acid-hydrolyzed with 6 M HCl at $100^{\circ}C$ for 30 min. To effectively extract ibuprofen and its metabolites, liquid-liquid extraction (LLE) was conducted at pH 3, 5, and 7, respectively. As a result, LLE at pH 3 was shown to be the best extraction condition. For the determination of trace amounts of ibuprofen and its metabolites in extract, trimethylsilylation (TMS) with BSTFA was applied and followed by GC/MS analysis. In this study, main 5 metabolites including parent drug were detected and these metabolites were assigned as three hydroxylated forms and one carboxylated form. Each metabolite was tentatively identified by both interpretation of mass spectrum and comparison with previously reported results. In addition, time profile of urinary excretion rate for parent drugs and metabolites was studied. Finally, the metabolic pathways of ibuprofen were suggested on the basis of the structural elucidation of its metabolites and excretion profiles.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.163-170
• /
• 2006

The shortage of proven hydrocarbon reserves has resulted in exploration progressing from the offshore into progressively deeper water of the continental shelf. Despite the success of seismic acquisition at ever greater depths, there are marine geological terrenes in which the interpretation of seismic data is difficult, such regions dominated by scattering or high reflectivity that is characteristic of carbonate reefs, volcanic cover and submarine permafrost. A marine controlled-source electromagnetic (CSEM) method has recently been applied to the oil and gas exploration thanks to its high-resistivity characteristics of the hydrocarbon. In particular, this method produces better results in terms of sensitivity under the deep water environment rather than the shallow water. Only in the last five years has the relevance of CSEM been recognized by oil companies who now use it to help them make exploration drilling decisions. Initial results are most promising and several contractors now offer magnetotelluric and CSEM services.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.225-238
• /
• 2019

Migration velocity analysis (MVA) for creating optimum depth-domain velocities in seismic imaging was applied to marine long-offset multi-channel data, and the effectiveness of the MVA approach was demonstrated by the combinations of conventional data processing procedures. The time-domain images generated by conventional time-processing scheme has been considered to be sufficient so far for the seismic stratigraphic interpretation. However, when the purpose of the seismic imaging moves to the hydrocarbon exploration, especially in the geologic modeling of the oil and gas play or lead area, drilling prognosis, in-place hydrocarbon volume estimation, the seismic images should be converted into depth domain or depth processing should be applied in the processing phase. CMP-based velocity analysis, which is mainly based on several approximations in the data domain, inherently contains errors and thus has high uncertainties. On the other hand, the MVA provides efficient and somewhat real-scale (in depth) images even if there are no logging data available. In this study, marine long-offset multi-channel seismic data were optimally processed in time domain to establish the most qualified dataset for the usage of the iterative MVA. Then, the depth-domain velocity profile was updated several times and the final velocity-in-depth was used for generating depth images (CRP gather and stack) and compared with the images obtained from the velocity-in-time. From the results, we were able to confirm the depth-domain results are more reasonable than the time-domain results. The spurious local minima, which can be occurred during the implementation of full waveform inversion, can be reduced when the result of MVA is used as an initial velocity model.

• Journal of Environmental Health Sciences
• /
• v.44 no.1
• /
• pp.44-54
• /
• 2018

Objectives: To protect individuals working at the site as well as the surrounding general population from a chemical accident, several emergency exposure guidance levels have been used to set a level of concern for certain chemicals. However, a level of concern has not been established for many substances that are frequently used or produced in large quantities in Korean workplaces. In the present study, we investigated the guidance levels for protecting populations from chemical exposure and the estimation of level of concern using acute inhalation and oral toxicity data. Methods: The number of chemicals to which emergency exposure guidance levels (e.g., ERPG-2, AEGL-2, PAC-2, and IDLH) can be applied were determined among 822 hazardous chemicals according to the 'Technical Guidelines for the Selection of Accident Scenarios (revised December 2016)'. The ERPG and AEGL values were compared across all three tiers for the 31 substances that appeared on both lists. We examined the degree of difference between the emergency exposure guidance levels and the estimates of level of concern calculated from acute inhalation or acute oral toxicity data. Results: Among the 822 hazardous chemicals, emergency exposure guidance levels can be applied to 359 substances, suggesting that the estimates of level of concern should be calculated using acute toxicity data for 56.3% of the hazardous chemicals. When comparing the concordance rates of ERPG and AEGL for 31 substances, the difference between the two criteria was generally small. However, about 40% of the substances have values diverging by more than three-fold in at least one tier. Such discrepancies may cause interpretation and communication problems in risk management. The emergency exposure guidance levels were similar to the estimates of level of concern calculated using acute inhalation toxicity data, but the differences were significant when using acute oral toxicity data. These results indicate that the level of concern derived from acute oral toxicity data may be insufficient to protect the population in some cases. Conclusion: Our study suggests that the development of standardized guidance values for emergency chemical exposure in the Korean population should be encouraged. It is also necessary to analyze acute toxicity data and fill the information gaps for substances that are important in Korean workplace situations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.281-286
• /
• 2021

The International Maritime Organization recently proposed a policy to establish a preemptive response strategy for exhaust gas pollution on board ships according to the recent strengthening of the sulfur content regulations. Discussions on improving the fuel oil quality and reducing emissions are also ongoing. Fuel oil quality information, which is one of the main concerns internationally, is increasing as the sulfur content standard is being applied from the current 3.5% to 0.5% by 2020. From the perspective of shipping companies and recipients, the essential quality of fuel oil is also requested for domestic and international fuel oil information, basic properties, correlation information between characteristics for application of solid ships and ships. The current standard for the basic quality of fuel oil is generally used, but the nature and composition of the fuel oil are very complex, and the interpretation of the basic quality is complicated because there are many cases outside the scope of the basic standard. Various factors were analyzed for the basic quality of fuel oil in terms of the basic quality of fuel oil, optimization of operation in ships, and fuel efficiency in ships. Moreover, the possibility of applying the standard according to the dilution was suggested.

• Korea Trade Review
• /
• v.43 no.4
• /
• pp.111-130
• /
• 2018

In December 2015, the Paris Agreement was adopted to cope with global warming caused by greenhouse gas emission and to prevent the average temperature of the Earth from rising. Renewable energy sources have become important to address environmental problems such as rising sea levels, depletion of forests and fine dust. In order to grow renewable energy, government support is needed. However, excessive government support for the renewable energy industry could pose problems that include undermining fair competition and raising costs. The WTO already has heard cases involving renewable energy subsidies. This article focuses on subsidies and countervailing tariffs as well as examines WTO disputes related to renewable subsidies, and also analyze legal issues that are problematic in granting subsidies for the development of new renewable energy industries. In WTO dispute involving renewable energy subsidies, legal issues are SCM Agreement article 2 Specificity, article 3 (b) import substitution subsidy and GATT article 20. This paper proposes improvement measures such as the reintroduction of article 8 Non-Actionable Subsidies or special provisions on energy subsidy. In addition, it is necessary to clarify the interpretation of Article 3 of the subsidy agreement. However, excessive government subsidies can lead to trade friction, so the WTO rules should be improved in line with the WTO goals of environmental protection, equity in free trade, and sustainable development.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.261-271
• /
• 2022

Six gas samples were collected from coal and coaly shale from core AA-1, which was acquired from the Asem-Asem Basin, southeast Kalimantan, Indonesia. These coalbed gas samples were analyzed for the molecular composition, carbon isotope (δ¹³C_CH4, δ¹³C_C2, and δ¹³C_CO2), hydrogen isotope (δD_CH4), hydrocarbon index (C_HC), and carbon dioxide-methane index (CDMI) to document their origin and methanogenic pathways. Core AA-1 successively consists of lower clastic sedimentary rocks (Sedimentary Unit-1, SU-1) containing coal and coaly shale, and upper limestone (Sedimentary Unit-2, SU-2), unconformably underlain by serpentinized basement interpreted as part of the Cretaceous Meratus subduction complex (MSC). The coal and coaly shale (SU-1) were deposited in a marshes nearby a small-scale river. Compositions of coalbed gases show that methane ranges from 87.35 to 95.29% and ethane ranges from 3.65 to 9.97%. Carbon isotope of coalbed methane (δ¹³C_CH4) ranges from -60.3 to -58.8‰, while hydrogen isotope (δD_CH4) ranges from -252.9 to -252.1‰. Carbon isotope of coalbed ethane (δ¹³C_C2) ranges from -32.8 to -31.2‰, carbon isotope of coalbed carbon dioxide (δ¹³C_CO2) ranges from -8.6 to -6.2‰. The coalbed CO₂ is interpreted to be an abiogenic origin based on a combination of δ¹³C_CO2 and CDMI and could have been transported from underlying CO₂ bearing MSC through faults. The methanogenic pathways of coalbed gases are interpreted to have originated from primary methyl-type fermentation and mixed with CO₂ reduction, affecting thermogenic non-marine coal-type gases based on analyses of isotopic ratios and various indexes.