• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.217-226
• /
• 2001

Stable isotope, paleoceanographic and sedimentological analyses were carried out along the core Ml5612 from the Mid-Atlantic Ridge. Distinct negative ${\delta}^{18}O anomalies punctuate the planktonic isotope records and correlate with the Heinrich-IRD cvents. The IRD layer in the corc contains varying amounts of quartz, K-feldspar, plagioclase, calcite, dolomite and mica, in which detrital carbonate contributes between I and 13% (except H3 and H6). Anomalies are strongest in the N. pachydenna (sin.) isotope record. Systematic changes in the ${\delta}^{18}O offset of G. hul/aides and G. inJlata signify variations in mid-latitude thermocline structure. In conjunction with negative benthic ${\delta}^{13}C anomalies, the data document a stronger contribution of a ${\delta}^{13}C depleted, nutrient-rich water mass during the IRD events. The ${\delta}^{13}C amplitude of > 1 $\textperthousand$ between 25 and 57 ka indicates changes between northern source (NADW) and southern source (AABW) water masses at this site. The IRD layers in the core Ml56l2 are correlative with those from the core S075-26KL and DSDP 609. The IRD layers from the Portuguese margin arc coeval with HI, H2 and H4 of the open North Atlantic. This similarity (and/or synchronicity in both regions may have been resulted from common changes in a North Atlantic thermohaline switch.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.187-192
• /
• 2007

Impact on cylindrical surface caused by plunging breaking waves is investigated experimentally. The breaking waves are generated in a wave flume by decreasing the wave maker frequencies linearly and focusing the generated wave components at one specific location. The breaking wave packets are based on constant wave steepness spectrum. Three inclination angles of cylinder are applied to examine the effect of contact angle between cylinder and front surface of breaking waves. Also, the effect of cylinder diameter on pressure distribution and its peak value is investigated by adopting three cylinders with different diameters. The longitudinal location of cylinder is slightly moved in eight different points to find out a probable maximum value of impact pressure. The pressures and total force on cylinder surface are measured by piezo-electric pressure sensors and 3-components load cell with 30kHz sampling rate. The variation of peak impact pressures and forces is analyzed in terms of cylinder diameter, inclination angle and location. Also, the pressure distribution on cylindrical surface is examined. The cylinder location and surface position are more important parameters that govern the magnitude and shape of peak pressures, while the cylinder diameter and inclined angle are relatively insignificant. In a certain conditions, the impact phenomenon becomes very unstable which results in a large variation of measured valves in repeated runs.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.552-558
• /
• 2005

A type of dimethyl sulfide gas CRM in the ppb level was developed for the analysis of trace-level odorous gas in environmental atmosphere. The concentration of dimethyl sulfide ($(CH_3)_2S$) was 10 umol/mol level in the cylinder filled with nitrogen, 1500 psi. And the variability of the concentration for 3 years was about 0.1% due to the adsorption or instability of $(CH_3)_2S$. The gas standards produced simultaneously in 4 bottles and examined by GC-FID were shown with 0.4%, reproducibility of preparation and 0.25%, standard uncertainty due to weighing and purity. The relative expended uncertainty of 1.1% (95% of confidence level, k=2) was assigned to the certified value of 10 umol/mol level of $(CH_3)_2S$ after quantitative evaluation on the purity, mixing, weighing, analysis, adsorption and stability of dimethyl sulfide gas.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.3 no.2
• /
• pp.134-140
• /
• 2004

Purpose: The reconstructive surgery of the anterior oblique ligament has been recommended for patients with unstable carpometacarpal joints. We reviewed retrospectively the functional results of two patients who had been treated by6 using a harvested portion of the tendon of flexor carpi radialis as a substitute for the anterior oblique ligament. Materials and Methods: In two patients with a instability of the trapeziometacarpal joint because of a rupture of the anterior oblique ligament, reconstruction was carried out using a slip of the tendon of flexor carpi radialis and the patients had been followed up for two years. Results: The results after a follow-up of two years that both of them had significant relief from pain and symptoms. The mean grip strength recovered to 90$\%$ of the controlateral side. patients felt that they had subjective improvement and would have undergone the operation again. Conclusion: Increased awareness of this lesion can lead to an early and clear diagnosis, so that the patient may be advised adequately.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6112-6119
• /
• 2015

This study attempted to examine the job stress and turnover intentions of physical therapists and to investigate the relationship between these two factors. A total of 309 physical therapists currently working in Gyeonggi-do and Incheon in South Korea were selected as research subjects. The data were collected by a survey using self-administered questionnaires structured from June 10 to June 25, 2015. According to the study results, job stress was highest in job autonomy and lowest in relationship conflict, while the turnover intention score was $2.80{\pm}0.70$. The physical therapists showed higher job stress and turnover intention level with increasing age and working experience, showing a significant positive correlation(p<.05). The turnover intention showed a significant positive correlation with all of the job stress factors. Decreased work motivation showed a significant positive correlation with all of the job stress factors except for job instability(p<.05). In addition, among the factors for the job stress, Job autonomy, Structure and organization, Inappropriate compensation, and Workplace culture turned out to be those affecting their turnover intention. This study confirmed that an increase of job stress among physical therapists can be a risk factor of higher turnover intention, implying a necessity to try to reduce their job stress and turnover intention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5933-5938
• /
• 2014

In this study, the effect of varying the mixture gas during FCA welding was studied for an Atos 60 test piece. To examine the characteristics of welding, the weldability of the material was checked before welding and online monitoring was performed to examine the mechanical properties after welding. The mixture Ar 80% + $CO_2$ 20% at low speed gave very elegant beads with very little spatter. 100% $CO_2$ gave rise to high spatter generation. For Ar 80% + $CO_2$ 20%, the low current region due to the normal short circuits created spatter, which was more than double for 100% $CO_2$. This peak distribution occurred due to the instability of the arc. The tensile test result for Ar 80% + $CO_2$ 20%, Ar 90%+ $CO_2$ 10% and $CO_2$ 100% at 511MPa, 507MPa, and 469MPa showed that the yield strength was improved by 8.1 and 8.9% for 80%+ $CO_2$ 20% and Ar 90%+ $CO_2$ 10%, respectively, compared to 100% $CO_2$. The tensile test result at 622MPa, 609MPa, and 581MPa showed that the yield strength was improved by 7.0% for both the mixture gas compared to 100% $CO_2$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1639-1645
• /
• 2015

In UHD high-speed video transmission system, when a signal within certain frequency region coincides electrically and structurally, the system becomes unstable because the energy is concentrated, and signal flux is interfered and distorted. For the instability, power integrity analysis should be conducted. To remove the signal distortion for MLB, using a high-frequency design technique for EMI phenomenon, EMI which radiates electromagnetic energy fluxed into power layer was analyzed considering system stabilization. In this paper, we proposed an adaptive MLB design method which minimizes high-frequency noise in MLB structure, enhances signal integrity and power integrity, and suppresses EMI. The characteristic impedance for multi-layer circuit board proposed in this study were High-Speed Video Differential Signaling(HSVDS) line width w = 0.203, line gap d = 0.203, beta layer height h = 0.145, line thickness t = 0.0175, dielectric constant ε_r = 4.3, and characteristic impedance Zdiff = 100.186Ω. When high-speed video differential signal interface board was tested with optimized parameters, the magnitude of Eye diagram output was 672mV, jittering was 6.593ps, transmission frequency was 1.322GHz, signal to noise was 29.62dB showing transmission quality improvement of 10dB compared to previous system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.182-187
• /
• 2011

In this paper, PBTI characteristics of NMOSFETs with La incorporated HfSiON and HfON are compared in detail. The charge trapping model shows that threshold voltage shift (${\Delta}V_{\mathrm{T}}$) of NMOSFETs with HfLaON is greater than that of HfLaSiON. PBTI lifetime of HfLaSiON is also greater than that of HfLaON by about 2~3 orders of magnitude. Therefore, high charge trapping rate of HfLaON can be explained by higher trap density than HfLaSiON. The different de-trapping behavior under recovery stress can be explained by the stable energy for U-trap model, which is related to trap energy level at zero electric field in high-k dielectric. The trap energy level of two devices at zero electric field, which is extracted using Frenkel-poole emission model, is 1,658 eV for HfLaSiON and 1,730 eV for HfLaON, respectively. Moreover, the optical phonon energy of HfLaON extracted from the thermally activated gate current is greater than that of HfLaSiON.

• Korean Security Journal
• /
• no.61
• /
• pp.307-332
• /
• 2019

Recently, our society has been changing its population structure due to low birth rate along with the extension of life span due to the development of medical environment and improvement of living environment. It was not long before the population became older, and the problem of the elderly was amplified by generational conflict. The current generation of senior citizens could not afford to prepare for their own retirement income due to their children's education, marriage and housing problems, and is a generation alienated from the benefits of public income security. In addition, not only are they in poverty with rapid industrialization, informatization and economic instability, but they are also threatened with livelihood. The increase in elderly crimes arising from the elderly, who are less adaptable to our society dominated by materialism, is being highlighted as a new social issue. In this study, we are going to analyze the causes of violent and violent senior citizens' crimes in quality along with quantitative growth, and present criminal situations and preventive measures using 10 years of data, judging that this is a time when a national response is needed through a social discussion on crimes committed by senior citizens in our society, where the pace of aging is unprecedentedly fast in the world In order to achieve this research objective, various opinions and statistical data of our society where the standards of senior citizens are changing were reviewed, and analysis of crimes was conducted on literature utilizing data of the Supreme Public Prosecutor's Office, the National Police Agency, and the National Statistical Office, recent press releases, and existing research materials. In this study, we will diagnose crimes committed by senior citizens in various aspects, including the characteristics of the elderly and the view of the elderly in the present society, and explore the direction of development for the prevention of future crimes as well.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.239-244
• /
• 2004

Effect of lubricants on the rheological and thermal properties of poly(butylene terephthalate) [PBT] were investigated. Calcium stearate and adipic acid glycol polyester (AhGP) were used as processing lubricants for PBT. Decrease of melt viscosity was accomplished by the addition of 1 wt％ of lubricants. It was understood that melt viscosity was affected by the enhancement of chain mobility of PBT with AhGP as an internal lubricant as well as the lubricity on processing equipment developed by calcium stearate as an external lubricant. Lubricants also influenced chain scission of PBT which caused the viscosity drop as well. In addition, lubricant is resulted in the lowering of thermal stability, however, this might be minimized by adding less than 3 wt％ of calcium stearate as a lubricant. As a consequence, calcium stearate as an external lubricant is more effective to control the melt viscosity of PBT with minimizing of chain scission and thermal instability in PBT.