• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.3
• /
• pp.29-34
• /
• 2001

In this paper, a new associative memory system for analog time-sequential data processing is proposed. This system effectively associate time-sequential data using not only matching with present data but also matching with past data. Furthermore in order to improve error correction ability, weight varying in time domain is introduced in this system. The network is simulated with several periodic time-sequential input patterns including noise. The results show that the proposed system has ability to correct input errors. We expect that the proposed system may be applied for a real time processing of analog time-sequential information.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.539-540
• /
• 2008

This paper presents an ultra-wideband (UWB) CMOS low noise amplifier (LNA) topology that operates in 3.1-10.6GHz band. The common gate structure provides wideband input matching and flattens the passband gain. The proposed UWB amplifier is implemented in 0.18 um CMOS technology for lower band operation mode. Simulation shows a minimum NF of 2.35 dB, a power gain of $18.3{\sim}20\;dB$, better than -10 dB of input and output matching, while consuming 16.4 mW.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.9
• /
• pp.84-101
• /
• 1997

Inferring and recognizing 3D objects form a 2D occuluded image has been an important research area of computer vision. The octree model, a hierarchical volume description of 3D objects, may be utilized to generate projected images from arbitrary viewing directions, thereby providing an efficient means of the data base for 3D object recognition. We present a fast algorithm of finding the 4 pairs of feature points to estimate the viewing direction. The method is based on matching the object contour to the reference occuluded shapes of 49 viewing directions. The initially best matched viewing direction is calibrated by searching for the 4 pairs of feature points between the input image and the image projected along the estimated viewing direction. Then the input shape is recognized by matching to the projectd shape. The computational complexity of the proposed method is shown to be O(n$^{2}$) in the worst case, and that of the simple combinatorial method is O(m$^{4}$.n$^{4}$) where m and n denote the number of feature points of the 3D model object and the 2D object respectively.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.1
• /
• pp.55-63
• /
• 1998

This paper presents a new maching algorithm by Hopfield Neural Network for 3-D object recognition. In the proposed method, a model object is represented by a set of polygons in a single coordinate. And each polygon is described by a set of features; feature attributes. In case of 3-D object recognition, the scale and poses of the object are important factors. So we propose a strategy for 3-D object recognition independently to its scale and poses. In this strategy, the respective features of the input or the model objects are changed to the startegical constants when they are compared with one another. Finally, we show that the proposed method has a robustness through the results of experiments which included the classification of the input objects and the matching sequence to its 3-D rotation and scale.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.818-823
• /
• 2003

본 논문에서는 입력 매칭(input matching) BIST(Built-In Self-Test) 회로를 이용한 RF font end의 새로운 결함 검사방법을 제안한다. BIST 회로를 가진 RF front end는 1.8GHz LNA(Low Noise Amplifier: 저 잡음 증폭기)와 이중 대칭 구조의 Gilbert 셀 믹서로 구성되어 있으며, TSMC 0.25$\mu\textrm{m}$ CMOS 기술을 이용하여 설계되었다. catastrophic 결함 및 parametric 변동을 가진 RF front end와 결함을 갖지 않은 RF front end를 판별하기 위해 RF front end의 입력 전압 특성을 조사하였다. 본 방법에서는 DUT(Device Under Test: 검사대상이 되는 소자)와 BIST 회로가 동일한 칩 상에 설계되어 있기 때문에 측정할 때 단지 디지털 전자계와 고주파 전압 발생기만이 필요하며, 측정이 간단하고 비용이 저렴하다는 장점이 있다. BIST 회로가 차지하는 면적은 RF front end가 차지하는 전체면적의 약 10%에 불과하다. 본 논문에서 제안하는 검사기술을 이용하여 시뮬레이션해 본 결과 catastrophic 결함에 대해서는 100%, parametric 변동에 대해서는 약 79%의 결함을 검출할 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.28-31
• /
• 2009

In this paper, a new approach for solid texture synthesis from input volume data is presented. In the pre-process, feature vectors and a similarity set were constructed for input volume data. The feature vectors were used to construct neighboring vectors for more accurate neighborhood matching. The similarity set which recorded 3 candidates for each voxel helped more effective neighborhood matching. In the synthesis process, the pyramid synthesis method was used to synthesize solid textures from coarse to fine level. The results of the proposed approach were satisfactory.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1250-1257
• /
• 2009

Due to the improvement of the seismic hazard analysis method and the design code, dynamic analysis method is widely used. To conduct dynamic analysis, various coefficients should be designated. The time history acceleration is one of the most essential factor. However, strong earthquake motion data from the outside of the country have been used to conduct dynamic analysis without considering of the ground motion parameters. In this study, the methodology to choose appropriate input motion is developed by using time domain design spectrum matching procedure. Two examples are applied to verify the methodology. The Result shows that the methodology satisfies seismic circumstances and the design code.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.193-194
• /
• 2007

This paper presents the design of a power amplifier for full-band UWB application systems using a CMOS 0..18um technology. A wideband RLC filter and a multilevel RLC matching scheme are utilized to achieve the wideband input/output matching. Both the cascade and cascode stage are used to increase the gain and to achieve gain flatness. Simulation results show that the designed amplifier provides a power gain greater than 10 dB throughout the UWB full-band(3.1-10.6GHz) and an input P1dB of -1.2dBm at 6.9GHz. It consumes 35.8mW from a 1.8V supply.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2843-2846
• /
• 2003

This paper proposes a PWM(Pulse Width Modulation) circuit using CMOS OTA with a single-voltage supply. The OTA employed has an input stage which consists of a pair of two MOSFETs operating in plural operation regions. The MOSFETs work complemetarily and realize a rail-to-rail input range. The input stage requires no matching of an n-channel type input circuit and a p-channel type input circuit unlike conventional rail-to-rail input stages because the input stage is realized by single channel type MOSFETs. In order to confirm the validity of the proposed circuit, it is simulated by H-SPICE program. Futhermore, the proposed circuit will be integrated on chip using 0.35 $\mu\textrm{m}$ CMOS technology.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.267-270
• /
• 2000

The feasibility of small linear antenna for near range wireless communications was studied. The requirement of the system are frequency range 9∼12 MHz and antenna size 15 cm. The communication range is about 15 m. The antenna input impedance is very small radiation resistance and very large capacitive reactance. The lossless impedance matching is nearly impossible, therefore lossy matching is considered. The antenna has very low radiation efficiency. The near field calculation has a large uncertainty, but the results can be used as the guideline of a small linear antenna system for a near range wireless communication.