• 한국정밀공학회지
• /
• 제7권2호
• /
• pp.58-64
• /
• 1990

As the miniature load cells have small inner space and sensing elements of which are thin and very sensitive to manufacturing conditions, it is very difficult to predict the rated outputs and control them by using the compensation resistor. The very useful equation has been derived for calculation of theoretical rated outputs for diaphragm type miniature load cells when commercial diaphragm strain gages are used. Four diaphragm type miniature load cells of which capacities are from 300 N to 1, 000 N and outer diameters are 20 mm and 26.5 mm are manufactured. The differences between calculating results and actural ones are less than 5%. According to numerical analysis the decrease of rated outputs caused to main error is examined in existence of loading button.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.657-666
• /
• 2017

본 연구에서는, 50인치 이상 대형 텔레비전의 높낮이의 마찰을 줄이기 위한 요인 분석이 실시되었다. 첫째는 피스톤 로드의 정확한 위치 제어를 위한 관형 전단면 제어에 대한 것이다. 여기서 관형 오리피스 전단면과 미로형 오리피스 전단면이 비교되었다. 두 번째 연구는 가스 씰 립 기술에 의한 마찰력 줄이기가 시행되었다. 세 번째는 실린더의 체적의 보상을 위한 주변장치가 피스톤 로드의 체적을 압축함으로서 세부사양을 결정하고 체적 보상 실험을 수행하는 것이다. 이로 인한 연구 결과들은 다음과 같다. 첫째는 CAE 및 실험적 고려를 통한 관형과 미로형 사이의 오리피스 전단면에 있어서, 미로형 오리피스의 전단면이 마찰을 줄이는데 뛰어났다. 둘째는 가스 씰 립 기술에서, 중공 로드의 실험 결과에서 외경 20 mm, 내경 8 mm의 직경을 가지는 것이 30 킬로그램을 가정한 50인치 이상의 텔레비전에 가장 적합한 것으로 확인되었다. 셋째는 사양결정과 체적 보상 실험을 위한 체적 보상의 안전성 문제와 성능의 총체적 고려사항 결과 중공로드 외경 8 mm, 내경 4 mm와 리벳 시스템이 결정되었다. 마지막으로, 300 mm의 이동거리에서는 관형, 미로형 오리피스에 있어 직경 0.4~0.6의 오리피스에서는 미로형 오리피스가 발견되지 않았다.

• 한국통신학회논문지
• /
• 제34권11A호
• /
• pp.882-890
• /
• 2009

본 논문에서는 Loran 신호를 이용하여 원거리통신망 및 전력 분배망과 같은 국가 기반 산업에 대한 망동기를 이루고자 할 때에 Loran 수신기에서 수신한 신호에 대한 위상 동기를 잃어 버렸을 때 이를 보상하기 위한 방안에 대해서 논한다. Loran 수신기에서 위상 동기를 잃었을 때에는 수신기 내에 있는 오실레이터가 자유구동을 하게되고, 따라서 이를 기준으로 출력되는 타이밍 동기신호의 성능이 크게 떨어지게 되며, 이때에 ITU G.811 표준에서 요구하는 PRC에 대한 1 us 이하의 요구 성능을 만족시킬 수 없게 된다. 따라서 본 논문에서는 Loran 수신기가 위상 동기를 잃었을 때 이를 보상하기 위해 보상 알고리즘을 사용하여 위상 점프를 보상하는 방법에 대해 제안했으며, 이에 대해 실측한 데이터에 대한 MTIE 성능을 분석하였다. 성능 분석 결과 제안된 방법을 사용하면 1시간 간격으로 동기를 잃었을 경우에 30 분 평균 이하의 스무딩 값을 사용할 경우 대략 0.6 us 이하의 MTIE 값을 보여서 산업체 표준에서 요구하는 1 us 이내의 PRC 성능을 충분히 만족시킬 수 있음을 확인하였다.

• 가족자원경영과 정책
• /
• 제16권2호
• /
• pp.19-39
• /
• 2012

Many students who attend university are worried about their future employment and academic achievement. Self-leadership is the ability to deal wisely with employment matters and to recognize the employment strategies of students who display self-leadership qualities. For this purpose, 320 questionnaires were distributed to students attending universities in Seoul. The 304 collected questionnaires were used as data for the final analysis. First, the university students' average self-leadership rate was 3.73, and their average employment rate was 3.24. In terms of self-leadership by subordinate domains, the most common strategy was to introduce "natural compensation activities", and the least common strategy was to focus on "inner compensation". For the employment strategy, "academic credit" was the best managed, and "active behavior" was the least well managed. Second, in terms of the differences in self-leadership due to social demographic variables, the self-leadership levels showed significant differences, according to their credits in general. Furthermore, they showed significant differences depending on gender and the leadership experience among the subordinate variables. Moreover, the university students' employment strategies showed significant differences according to gender, leadership experience and leadership education. Third, in terms of the difference between self-leadership and employment strategies due to psychological variables, self-efficacy and university-life satisfaction levels made significant differences in terms of self-leadership. Fourth, the group with high self-leadership levels also had highly developed employment strategies, compared to the group with low self-leadership levels. Fifth, after analyzing the social demographic variables, the psychological variables and the influence of self-leadership, it appears that the explanation level increased at each step. This study demonstrates that experiencing many opportunities that promote self-leadership during university causes students to worry about their future careers and prohibits them from developing into independent, responsible adults who can accomplish their goals.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.138-147
• /
• 2001

Alignment systems are frequently used under various semiconductor manufacturing environment. Particularly in PDP(Plasma Display Panel) manufacturing process, the alignment system is applied to the combining and sealing processes of the upper and lower glass panels of PDP, where these processes are performed in the vacuum chamber of high vacuum and high temperature. In this paper, the XYΘ-alignment stage is developed to align PDP panels. Because of high vacuum and high temperature environment, the alignment chamber has been designed to isolate the inner part of the alignment chamber from the outer environment of high vacuum and high temperature, in which every part of the alignment stage is inserted. As it is difficult to attach feedback sensors to the alignment stage in the alignment chamber, the alignment stage is implemented with the open loop algorithm, where the parallel link structure has been designed using step-motors and ball-screws for structural simplicity. The kinematic analysis is performed to drive the parallel link structure, based on the experiments of actuation-compensation of the alignment stage. For the error compensation, the hyperpatch model has been used to model the errors. From the experiments, the positional accuracy of the alignment stage can be improved significantly.

• 전력전자학회논문지
• /
• 제15권4호
• /
• pp.296-308
• /
• 2010

본 논문은 영구자석형 동기발전기를 이용한 풍력발전 시스템의 3병렬 운전과 계통연계 기술을 제안한다. 영구자석형 풍력발전 시스템에서 back-to-back 컨버터는 발전기와 계통에 직접 연결되므로 시스템 정격에 준하는 전력 반도체 소자와 필터가 요구된다. 본 논문은 시스템의 전력변환부를 3병렬로 연결하고 병렬 운전에 의해 발생할 수 있는 순환 전류는 적절한 내부 인덕터 선정으로 해결한다. 낮은 스위칭 주파수로 운전되는 대용량 풍력발전 시스템의 THD 규정을 만족시키기 위해 최적 설계된 LCL필터를 사용하고 LCL필터에 의해 발생할 수 있는 공진 문제는 전력이론을 통한 능동 댐핑 기법을 통하여 추가적인 손실 없이 보상한다. 또한 계통 왜곡 및 불평형 시 발생할 수 있는 전력 품질의 문제는 추가적인 보상 알고리즘을 적용하여 향상시킨다. 시뮬레이션 및 실험을 통하여 병렬 운전 시스템과 알고리즘의 타당성을 검증한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권5호
• /
• pp.15-21
• /
• 2003

In order to improve the quality of a spindle unit it is important to increase its rotational accuracy. The rotational accuracy of a spindle unit can be defined as the stability or immobility of its spindle axis while rotating. Spindle rotation in the rolling bearings causes the disturbing influence, which leads to the oscillation of a rotation axis. The purpose of this study is to investigate the oscillation sources and find a way to decrease the runout without additional expenses. The main source of oscillation is the interaction between rolling bodies and ring races. The first oscillation source was the out-of-shape imperfection of inner bearing ring. The mutual compensation of oscillation by proper rings orientation was proposed, which sometimes allow to decrease the radial runout of spindle rotation axis by approximate 40％ down. Also the outer ring harmonics were explored as the second oscillation source. The analysis shows the dependency between the number of rolling bodies and the outer ring race harmonics. The conclusion on the orientation of bearing cages and the bearing rings was made, which makes possible to obtain the optimal variant of their mounting in the spindle unit when the rotational accuracy of the spindle is maximal, and the spindle runout considerably less.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1118-1123
• /
• 2008

High voltage multilayer ceramic capacitors (MLCCs) are classified into two classes-those for temperature compensation (class I) and high dielectric constant materials (class II). We manufactured high voltage MLCC with temperature coefficient characteristics of C0G and X7R and studied the characteristics of electric properties. Also we studied the characteristics of dielectric breakdown voltage (V) as the variation of thickness in the green sheet and how to pattern the internal electrodes. The dielectric breakdown by electric field was caused by defects in the dielectric materials and dielectric/electrode interface, so the dielectric thickness increased, the withstanding voltage per unit (E) thickness decreased. To overcome this problem, we selected the special design like as floating electrode and this design affected the increasing breakdown voltage(V) and realized the constant withstanding voltage per unit thickness(E). From these results, high voltage application of MLCCs can be expanded and the rated voltage can also be develop.

• 한국지능시스템학회논문지
• /
• 제14권3호
• /
• pp.375-382
• /
• 2004

신경회로망을 이용한 XY 테이블의 비선형 보상기법을 제안한다. 제안된 신경망 제어기는 시스템의 비선형 성분에 의한 성능저하를 보상하는 신경회로망과 시스템의 안정화를 위한 비례미분(PD) 제어기로 구성된다. 신경망 보상 구조가 적응적이고 추적오차와 파라미터 추정치가 유계가 되는 신경망 파라미터 동조알고리듬과 안정도 증명을 제시한다. 신경망 제어기를 위치 테이블에 실험함으로써 비선형 성분에 의한 성능저하를 줄이는 효과를 보여준다.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.285-292
• /
• 2010

This paper presents a current mode integrated control technique (CM-ICT) using a modified voltage space vector modulation (MSVM) for Z-source inverter (ZSI) fed induction motor drives. MSVM provides a better DC voltage boost in the dc-link, a wide range of AC output voltage controllability and a better line harmonic profile. In a voltage mode ICT (VM-ICT), the outer voltage feedback loop alone is designed and it enforces the desired line voltage to the motor drive. An integrated control technique (ICT), with an inner current feedback loop is proposed in this paper for the purpose of line current limiting and soft operation of the drive. The current command generated by the PI controller and limiter in the outer voltage feedback loop, is compared with the actual line current, and the error is processed through the PI controller and a limiter. This limiter ensures that, the voltage control signal to the Z-source inverter is constrained to a safe level. The rise and fall of the control signal voltage are made to be gradual, so as to protect the induction motor drive and the Z-source inverter from transients. The single stage controller arrangement of the proposed CM-ICT offers easier compensation. Analysis, Matlab/Simulink simulations, and experimental results have been presented to validate the proposed technique.