Browse > Article
http://dx.doi.org/10.5762/KAIS.2017.18.5.657

A Combination Study on the Elevation Motion Friction Compensation Parameters in Gas Spring (1)  

Lee, Jeong-Ick (Dept. of Mechanical Design, Division of Mechanical Engineering, INHA Technical College)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.18, no.5, 2017 , pp. 657-666 More about this Journal
Abstract
In this study, factor analysis was performed to reduce the friction in the elevation motion of a stand for a 50-inchtelevision. Pipe type cross-section control was used for accurate positioning control of the piston rod. The pipe type was also compared with a labyrinth-type crosssection for the orifice. The frictional force was then reduced using gas seal lip technology. Specifications were chosen, and a volume compensation experiment was carried out using an apparatus for compensating the volume of the cylinder, which is compressed by the volume of the piston rod. Based on CAE and experimental considerations, the labyrinth-type orifice is preferred for reducing friction. For the gas seal lip technology, outer and inner diameters of ${\Phi}20$ and ${\Phi}8$ for the hollow rod were more appropriate when assuming the weight of a 50-inch television to be 30kgf. The third is that the result of total consideration in stability problem and performance of volume compensation for specification decision and volume compensation experiment is determined the final speculation of hollow rod ?8x?4 and riveting system. The last is that the labyrinth orifice is not founded that of the ${\O}0.4{\sim}0.6$ orifice both tests on 300 mm intervals.
Keywords
Elevation; Friction; Gas seal lip; Hollow rod; Labyrinth type; Orifice; Piston; Pipe type;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 S. W. Kim and W. T. Kim, "Numerical simulation on interaction of liquid droplet-wall surface in a gas channel of a polymer electrolyte membrane full cell", Jol. of Korean Soc. of Mechanical Technology, Vol. 17, No. 1, pp. 97-102, 2015. DOI: https://doi.org/10.17958/ksmt.17.1.201502.97   DOI
2 D. J. Chun and C. H. JI, "A study on the thermal load effect by piston oil jet gallery", Jol. of Korean Soc. of Mechanical Technology, Vol. 14, No. 1, pp. 1-6, 2012. DOI: https://doi.org/10.17958/ksmt.14.1.201202.1   DOI
3 A. R. Ye, R. Das and H. D. Kim, "Investigation of transonic and supersonic flows over an open cavity mounted on curved wall(1)", Trans. Korean Soc. Mech. Eng. B, Vol. 39, No. 3, pp. 231-236, 2015. DOI: https://doi.org/10.3795/KSME-B.2015.39.3.231   DOI
4 J. S. Nam, G. W. Kim, J. H. Kim and H. D. Kim, "Theoretical and computational analysis of Bernoulli Levitation flows", Trans. Korean Soc. Mech. Eng. B, Vol. 37, No. 7, pp. 629-636, 2013. DOI: https://doi.org/10.3795/KSME-B.2013.37.7.629   DOI
5 J. S. Kim, J. W. Kim, H. M. Kim and S. E. Yoon, "Calculation of heat loss coefficient at surcharged circular manhole using fluent model",Proceedings of the Korean water resources association conference, pp. 1828-1832, 2008.
6 C. W. Park and H. Y. Kim, "A study on the auto-mobile gas spring structural analysis using of bimetal", Jol. of the Korean Society of Manufacturing Technology Engineers, Vol. 22, No. 1, pp. 131-137, 2013. DOI: https://doi.org/10.7735/ksmte.2013.22.1.131   DOI
7 I. S. Han, K. J. Choi, J. Y. Kim and Y. B. Lee, "The numerical analysis and experimental verification of the heat transfer effect on the highly pressured gas spring", Transactions of KSAE, Vol. 21, No. 2, pp. 87-97, 2013.
8 S. K. Lim, C. H. Lee, I. Hwang, H. W. Kang and S. J. Park, "Design of high frequency casting machine for dental", Proceedings of KSMTE Spring Meeting, pp.264-265, 2011.