• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.200-220
• /
• 2014

This study reexamines the old concept and reviews prevalent statements on Cenozoic vertical motions of the peninsula that have been uncritically repeated in our academia. The contents of this paper are redefinition of the notion, tilted flexure or warping, and a suggestion for a new time set and properties of the deformation, followed by a new model on its influencing factors and processes. In conclusion, the Cenozoic vertical motion of the Korean peninsula can be reified further with an epeirogenic movement of uplift in the east side-subsidence in the west side of the peninsula since the Neogene (23 Ma). However, the regional boundary for areas of uplift and subsidence is not likely in the Korean peninsula but broader farther to East China and the southern part of Russia. It can be best understood that mantle convection produced by subducting activities in the Western Pacific Subduction Zone causes the uplift and subsidence of earth surface around NE Asia. In addition, faultings in the upper lithosphere induced by in-situ plate boundary stresses accelerate regional uplift in the peninsula since the Quaternary. Controversies that are still standing such as current uplift movements along the western coast of the peninsula during the late Quaternary could be precisely discussed with future research providing detailed information on it.

• Geotechnical Engineering
• /
• v.14 no.2
• /
• pp.107-126
• /
• 1998

Ground settlements induced by tunnel excavation cause the foundations of the neighboring building structures to deform. An expert system called NESASS( Neural network Expert System for Adjacent Structure Safety analysis) was developed to analyze the structural safety of such building structures. NESASS predicts the trend of ground settlements resulting from tunnel excavation and carries out a safety analysis for building structures on the basis of the predicted ground settlements. Using neural network technique. the NESASS learns the database consisting of the measured ground settlements collected from numerous actual fields and infers a settlement trend at the field of interest. The NESASS calculates the magnitudes of angular distortion, deflection ratio, and differential settlement of the structure. and in turn, determines the safety of the structure. In addition, the NESASS predicts the patterns of cracks to be formed in the structure, using Dulacska model for crack evaluation. In this study, the ground settlements measured from Seoul subway construction sites were collected and classified with respect to the major factors influencing ground settlement. Subsequently, a database of ground settlement due to tunnel excavation was built. A parametric study was performed to select the optimal neural network model for the database. A comparison of the ground settlement predicted by the NESASS with the measured ones indicates that the NESASS leads to reasonable predictions. The results of confidence evaluation for safety evaluation system of the NESASS are presented in this paper.

• Journal of Periodontal and Implant Science
• /
• v.48 no.2
• /
• pp.103-113
• /
• 2018

Purpose: The purpose of this retrospective study with 4-12 years of follow-up was to compare the marginal bone loss (MBL) between external-connection (EC) and internal-connection (IC) dental implants in posterior areas without periodontal or peri-implant disease on the adjacent teeth or implants. Additional factors influencing MBL were also evaluated. Methods: This retrospective study was performed using dental records and radiographic data obtained from patients who had undergone dental implant treatment in the posterior area from March 2006 to March 2007. All the implants that were included had follow-up periods of more than 4 years after loading and satisfied the implant success criteria, without any peri-implant or periodontal disease on the adjacent implants or teeth. They were divided into 2 groups: EC and IC. Subgroup comparisons were conducted according to splinting and the use of cement in the restorations. A statistical analysis was performed using the Mann-Whitney U test for comparisons between 2 groups and the Kruskal-Wallis test for comparisons among more than 2 groups. Results: A total of 355 implants in 170 patients (206 EC and 149 IC) fulfilled the inclusion criteria and were analyzed in this study. The mean MBL was 0.47 mm and 0.15 mm in the EC and IC implants, respectively, which was a statistically significant difference (P<0.001). Comparisons according to splinting (MBL of single implants: 0.34 mm, MBL of splinted implants: 0.31 mm, P=0.676) and cement use (MBL of cemented implants: 0.27 mm, MBL of non-cemented implants: 0.35 mm, P=0.178) showed no statistically significant differences in MBL, regardless of the implant connection type. Conclusions: IC implants showed a more favorable bone response regarding MBL in posterior areas without peri-implantitis or periodontal disease.

• Culinary science and hospitality research
• /
• v.22 no.7
• /
• pp.72-87
• /
• 2016

The study is to investigate whether the transforming leadership of the owners who run the small-sized restaurants in Busan has a moderating effect of gender on influential relationship between TMX and organizational citizenship behavior. To achieve the goal, the moderating effect of gender, systematic causality and the degree of connection of the whole pattern were investigated using Structural Equation Modeling between the factors drawn with the software packages, SPSS statistics (V 21.0) and AMOS (V 18.0). According to the result from the investigation, there is the meaningful causality both in the relationship between transforming leadership of the owners who run small restaurants and TMX, and in the relationship between TMX and organizational citizenship behavior. The moderating effect of gender was shown from the effect of intellectual stimulus on TMX and the causality between TMX and organizational citizenship behavior. The outcome suggests that the transforming leadership of the owners and the free communication with employees would be helpful for the prosperity of their businesses. In addition, intellectual stimulus has a moderating effect on TMX while TMX has the same effect on organizational citizenship behavior. This also implies that the degree of the effect on TMX an organizational citizenship behavior depends on the gender.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.9-15
• /
• 2015

The study aims to examine the knowledge and awareness of care workers on oral health knowledge at the geriatric care facilities in order to improve and develop oral health services. For the research method, the study carried out a questionnaire survey to 163 care workers working at the geriatric care facilities (10) in D Metropolitan City from May 1~31, 2015 and then the collected data were statistically analyzed. As a result, the oral health knowledge of care workers was 20.09 points out of total 26 points (77.2%). The highest knowledge was 'proper toothbrushing method' with 93.0% and the lowest one was 'knowledge on the use of oral supplementary goods' with 58.1%. Those with experience of oral health education had higher demand on oral health education (P<0.001), and those with higher experience of oral health education had significantly higher oral health knowledge (P<0.001), demand (P<0.01) and awareness (P<0.05). As for factors influencing care workers' oral health awareness, if they had higher oral health knowledge points (P<0.01), oral health education demand (P<0.01), they had higher oral health awareness level. Accordingly, it is required to provide efficient, sustainable and practical oral health education of care workers considering oral characteristics of the long-term hospitalized patients at the care hospital. And, the role of dental hygienist as the person in charge of oral health education is necessary. Therefore, institutional support from the government is required to assign professional personnel.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.5
• /
• pp.35-43
• /
• 2017

It is a method of suppressing back ground subsidence by re-injecting groundwater back to the target ground and recovering the underground water level. In order to analyze the subsidence of the back ground due to maintaining the underground water level, indoor model experiments were conducted. Through this study, the factors influencing on the groundwater and the tendency of subsidence back ground by experiments were analyzed and the effect of ground subsidence by reinfusion of groundwater was also investigated. As a result of the subsidence analysis with considering only the influence of the underground water level, the settlement of the ground occurs as the underground water level at the time of ground excavation goes down. The closer to the back of the retaining wall, the maximum settlement occurred. Moreover, it was analyzed that the influence distance where subsidence occurs from retaining wall to the point of about 1.8 H on the basis of the ground collapse. The most effective location of water reinjection is the closet location to the back of braced-cut wall for reducing the groundwater down and also minimizing the ground settlement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.658-671
• /
• 1999

The major influencing factors on the strength of all-ceramic crowns are types of dental ceramics, fabrication techniques, methods of abutment preparation and cementation modes of all-ceramic restorations. Zinc phosphate cement and glass-ionomer cement were used as an early lot-ing media for all-ceramic crowns. Recently many studies have reported that resin cements have more advantages in increasing the fracture strength of restorations comparing with zincphosphate cement and glass-ionomer cement. The purpose of this study is to investigate the effect of etching, silane treatment, sandblasting and dentin bonding agents on fracture strengths of dental ceramics. 40 flat dentin specimens and 40 ceramic discs of 1.5mm thickness and 8mm diameter were fabricated, and divided into 4 groups according to surface treatments. Surface treatments before cementation were as follows Group I : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : application of dentin bonding agent Group II : (ceramic) : sandblasting - application of bonding resin (dentin) : application of dentin bonding agent Group III : (ceramic) : application of bonding resin (dentin) : application of dentin bonding agent Group IV : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : no dentin bonding procedure Dentin specimens and ceramic discs were cemented with dual cure resin cement, and went through thermocycling. Compressive stress es were loaded on the centers of ceramic discs with Instron test-ing machine, and fracture strengths resistance for catastrophic fracture were measured The results were as follows. 1. The group I showed the highest fracture resistance. The next was group II And group III, IV followed. 2. There was a significant difference in the mean value of fracture strengths between group I and group III (p<0.05), but no significant differences between group I and group II, and group II and group III (p>0.05). 3. There was a significant difference in the mean value of fracture strengths between group I and group IV (p<0.05).

• International Commerce and Information Review
• /
• v.16 no.5
• /
• pp.319-342
• /
• 2014

In this paper, we aim to advance our knowledge about factors influencing rapid globalization of firms in Korea. Through analysing empirically, this study focuses on the effect of technology competencies and marketing competencies and network in Korea rapid globalization. The subject of this study was foreign subsidiaries that entered in korea to expand their business overseas. This study are examined by the sample of 186 foreign subsidiaries operating in Korea. The empirical results from structural equation modeling and regression analysis. Our findings show that marketing competencies, technological competencies and network are key drivers of rapid globalization in Korea market. Meanwhile, we also find that marketing competencies related to overseas market development in B2C foreign subsidiaries and technology competencies related to overseas market development in B2B foreign subsidiaries. And it was revealed in the path analysis using AMOS model that the relevancy of the study model was higher for B2C foreign subsidiaries than B2B foreign subsidiaries and the explanatory power(statistic index) revealed to be 31.9% higher for B2C foreign subsidiaries than B2B foreign subsidiaries in the effect relation on the rapid globalization in Korea market. Company type (B2C/B2B) was revealed moderating factor on the rapid globalization. Our study confirmed that marketing, technological competencies and network of firms effects on the rapid globalization in Korea.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.95-106
• /
• 1974

The Purpose of this study was to observe the body temperature changes of newborn infants in general crib and electric heat crib after birth for the period required to reach the optimum body temperature. Forty-seven newborn infants who were delivered at Seoul National University Hospital during the period from June 12 to September 13, 1973 were chosen as Subjects for this study. The criteria for the choice of subjects were the babies with normal spontaneous delivery; body weight 2.5kg and over at birth; Apgar so ore seven and over and gestation period over thirty-six weeks. Of these subjects, by random sampling thirty-one newborn infants were placed in the general crib and sixteen in the electric-heat crib. The rectal body temperature of these newborn infants were taken and recorded at fifteen-minute interval for the first one hour period after birth, at thirty minute interval for the next two hours and at one hour interval for the remaining period up to eight hours. The results of the study were as follows: 1. The mean body temperature of the newborn infants on admission to nursery ranged from 98.7℉. to 99℉. irrespective of the body weight and the room temperature. 2. There was a significant difference in the body temperature changes of the newborn infants as a total between the general crib and the electric-heat crib from three to eight hours after birth. It was found that the body temperature of the newborn infants in the electric-heat crib was significantly higher than that of the newborn infants in the general crib. 3. In comparison with the body temperature changes of the newborn infants in the general crib, the newborn infants in the electric- heat crib exhibited significantly higher body temperatures in all three body weight groups; from four to eight hours after birth in the 2.5-2.9kg body weight group; from three to seven hours after birth in the 3.0-3.4kg body weight group; from two and half to six hours after birth in the group with body weight over 3.5kg. 4. Time required to reach 98℉. of body temperature was four hours in the 3.5-2.9kg body weight group, three hours in the 3.0-3.4kg. body weight group and two and half hours in the group with body weight over 3.5kg in the electric- heat crib. In the general crib, it took over eight hours in the 2.5-2.9kg body weight group and five hors in both the 3.0-3.4kg and over 3.5kg body weight group to reach 98℉ of body temperature. 5. The lowest mean body temperature of newborn infants in both general and electric- heat crib appeared in forty-five minute after birth and the temperature ranged from 96.4℉ to 96.5℉. 6. The mean body temperature of the newborn infants in the general crib was increased as the room temperature. 7. The body weight, the room temperature and the time elapsed after birth fore proved to be significant factors influencing the body temperature changes of newborn infants. From tile above results, the three hypotheses were positively accepted.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.3
• /
• pp.695-706
• /
• 2015

The purpose of this study was to examine the relationship among self-leadership, critical thinking disposition, satisfaction of clinical practice and clinical practice competency of nursing students. Participants were 199 baccalaureate nursing students (3rd and 4th grades) in 2 cities. The data was collected by questionnaires and were analyzed with the SPSS/Win 21.0 program, using descriptive statistics, Pearson's correlation coefficient and multiple regression. Significant positive correlations were among self-leadership, critical thinking disposition, satisfaction of clinical practice and clinical practice competency. The regression model explained 30.4% of satisfaction of clinical practice. The significant predictors of satisfaction of clinical practice were clinical experience, satisfaction of major, self-leadership and critical thinking disposition. The regression model explained 23.7% of clinical practice competency. Health status, self-leadership and critical thinking disposition were factors influencing clinical practice competency. It should strengthen self-leadership and encourage critical thinking disposition to improve nursing students' satisfaction of clinical practice and clinical practice competency.