• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1138-1147
• /
• 2005

This paper aims at demonstrating the feasibility of active control of beams with a multiobjective state-feedback control technique. The multiobjective state-feedback controller is de­signed on a linear matrix inequality (LMI) approach for the multiobjective synthesis. The design objectives are to achieve a mix of Hoo performance and H2 performance satisfying constraints on the closed-loop pole locations in the face of model uncertainties. The controller is also designed to reject the effects of the noise and external of disturbances. For the theoretical analysis, the governing equation of motion is derived by Hamilton's principle to describe the dynamics of a smart structural system. Numerical examples are presented to demonstrate the effectiveness of the integrated robust controller in damping out the multiple vibration modes of the piezo/beam system.

• 대한수학회지
• /
• 제37권4호
• /
• pp.625-643
• /
• 2000

In this paper we formulate an optimal control problem governed by time-delay Volterra integral equations; the problem includes control constraints as well as terminal equality and inequality constraints on the terminal state variables. First, using a special type of state and control variations, we represent a relatively simple and self-contained method for deriving new necessary conditions in the form of Pontryagin minimum principle. We show that these results immediately yield classical Pontryagin necessary conditions for control processes governed by ordinary differential equations (with or without delay). Next, imposing suitable convexity conditions on the functions involved, we derive Mangasarian-type and Arrow-type sufficient optimality conditions.

• 수산해양기술연구
• /
• 제49권2호
• /
• pp.153-160
• /
• 2013

Control allocation is an important part of a system. It implements the function that map the desired command forces from the controller into the commands of the different actuators. In this paper, the authors present an approach for solving constrained control allocation problem in vessel system by using multi-parametric quadratic programming (mp-QP) algorithm. The goal of mp-QP algorithm applied in this study is to compute a solution to minimize a quadratic performance index subject to linear equality and inequality constraints. The solution can be pre-computed off-line in the explicit form of a piecewise linear (PWL) function of the generalized forces and constrains. The efficiency of mp-QP approach is evaluated through a dynamic positioning simulation for a vessel by using four tugboats with constraints about limited pushing forces and found to work well.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.656-661
• /
• 2005

This paper is concerned with an iterative linear matrix inequality (LMI) approach to the design of a structurally constrained output feedback controller such as decentralized control. The structured synthesis is formulated as a novel rank-constrained LMI optimization problem, where the controller parameters are explicitly described so as to impose structural constraints on the parameter matrices. An iterative penalty method is applied to solve the rank-constrained LMI problem. Numerical experiments are performed to illustrate the effectiveness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.697-699
• /
• 2000

In this paper, an extension of model predictive controller for nonlinear process using Takagi-Sugeno(TS) fuzzy model is proposed Since the consequent parts of TS fuzzy model comprise linear equations of input and output variables. it is locally linear, and the Generalized Predictive Control(GPC) technique which has been developed to control Linear Time Invariant(LTI) plants, can be extended as a parallel distributed controller. Also fuzzy soft constraints are introduced to handle both equality and inequality constraints in a unified form. So the traditional constrained GPC can be transferred to a standard fuzzy optimization problem. The proposed method conciliates the advantages of the fuzzy modeling with the advantages of the constrained predictive control, and the degree of freedom is increased in specifying the desired process behavior.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.436-439
• /
• 2005

Dynamic contact of a cantilever beam with Sap at the end is discussed. The gap in a structure induces dynamic contact, and the contact problem is always accompanied by inequality constraints which mean that the solution of the structure with contact condition should satisfy variational inequality. Inequality, but, can be reduced to equality condition considering convex penalty function. In this paper, formulation of a beam with contact is derived using quasi convex penalty function. General coordinate solution which is needed to increase computational efficiency is applied. Nonlinear behavior of a beam with rigid and elastic contact condition was discussed.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.861-867
• /
• 2003

We propose a sliding surface design method for linear systems with mismatched uncertainties in the state space model. In terms of LMIs, we derive a necessary and sufficient condition for the existence of a linear sliding surface such that the reduced-order equivalent sliding mode dynamics restricted to the linear sliding surface is not only stable but completely invariant to mismatched uncertainties. We give an explicit formula of all such linear switching surfaces in terms of solution matrices to the LMI existence condition. We also give a switching feedback control law, together with a design algorithm. Additionally, we give some hints for designing linear switching surfaces guaranteeing pole clustering constraints or linear quadratic performance bound constraints. Finally, we give a design example in order to show the effectiveness of the proposed methodology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1905-1910
• /
• 2003

It is well known that parameter uncertainties and time-delays cannot be avoided in practice and result in poor performance and even instability. Nevertheless, to the authors' best knowledge, there exist few results on model predictive control (MPC) handling explicitly uncertain time-delayed systems. In this paper, we present an MPC algorithm for uncertain time-varying systems with input constraints and state-delay. An optimization problem is suggested to find a memoryless state-feedback MPC law and the closed-loop stability is established under feasibility and certain conditions.

• 대한전기학회논문지
• /
• 제32권4호
• /
• pp.145-154
• /
• 1983

This paper presents a new method for optimal real and reactive power dispatch for the economic operation of a power system. Unlike the usual approach of minimizing the transmission loss, this method minimizes the total production cost not only for the real power optimization problem, but also for the reactive power optimization. The control variables are real power generation of units for real power optimization, and reactive power optimization. The constraints are the operating limits on these control variables and the limits on the bus voltages. Methematical models are developed to represent the sensitivity relationships between dependent and control variables for both real and reactive power optimization modules, and thus eliminate the use of B-coefficients. In order to handle many functional inequality constraints, a modified version of the gradient projection method is developed for optimization procedure, and has shown a remarkable advantage in computation efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1212-1219
• /
• 2009

본 연구에서는 실용설계의 새로운 도구로써 제어계의 강인성, 성능, 안정성 등의 설계지침을 정량화하기 쉽고 해가 효율적으로 구해져 주목받는 선형행렬부등식을 이용하여 강인한 LMI 제어기를 설계한다. 우선 다층상 구조물의 진동제어를 위해 수학적 모델링을 행하고 적분형 서보계를 적용한 LMI 제어 기법으로 상태 피드백 제어칙을 설계한다. 다음으로 설계한 제어칙으로 시스템 불확실성의 변동에 대해 시간영역의 설계사양을 고려한 경우와 고려하지 않은 경우에 대하여 시뮬레이션을 행하고 실제 적용 가능성을 검토한다.