• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.149-169
• /
• 2009

Integrated Pollution Prevention and Control(IPPC) has become an idealistic environmental prevention concept in developed countries and corresponds with principles of Industrial Ecology. The concept of emissions regulatory integration is a key factor for an integrated environmental management system. While most EU member countries have a cross-media regulatory system, Korea has a media-specific regulatory system which was found to have significant environmental management problems. The purpose of this study is to integrate the emissions regulatory system by resolving difficulties through procedural, organizational, and substantive analysis of integration. To this end, the following research was performed: The first task was to determine the target of the integrated emissions regulatory system. In connection with this, the "IPPC directive" of the EU and the "PPCA 2000" schedule 1 of the UK, as well as environmental laws in Korea were compared and analyzed. The second was to design a regulatory system model. This model was divided into three groups after considerations were made regarding the time it would take for the pre-application,application, and permission stages. Lastly, on the basis of this research, a revised bill for an integrated emissions regulatory system was suggested. Nevertheless, substantive analysis of integration focused on BAT requires supplementation in order to make the integrated emissions regulation system operate normally as an environmental management policy and regulation method. To this end, the specific characteristics of Korean society, culture, and law should be actively considered.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.506-512
• /
• 2013

Biomass and low-grade coals are known to be better potential sources of energy compared to crude oil and natural gas since these materials are readily available and found to have large reserves, respectively. Gasification of these carbonaceous materials produced syngas for chemical synthesis and power generation. Woodchip, sawdust and lignite were gasified with steam in a thermobalance reactor under atmospheric pressure in order to evaluate their kinetic rate information. The effects of gasification temperature ($600{\sim}900^{\circ}C$) and partial pressure of steam (20~90 kPa) on the gasification rate were investigated. The three different types of gas-solid reaction models were applied to the experimental data to predict the behavior of the gasification reactions. The modified volumetric model predicted the conversion data well, thus the model was used to evaluate kinetic parameters in this study. The observed activation energy of biomass, sawdust and lignite gasification reactions were found to be in reasonable range and their rank was found to be sawdust > woodchip > lignite. The expression of apparent reaction rates for steam gasification of the three solids was proposed to provide basic information on the design of coal gasification processes.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.1
• /
• pp.39-48
• /
• 2014

Objective: This entire study has two parts. Study I aimed to develop a psychological assessment scale and the study II aimed to investigate the effects of LFN (low frequency noise) on the psychological responses in humans, using the scale developed in the study I. Background: LFN is known to have a negative impact on the functioning of humans. The negative impact of LFN can be categorized into two major areas of functioning of humans, physiological and psychological areas of functioning. The physiological impact can cause abnormalities in threshold, balancing and/or vestibular system, cardiovascular system and, hormone changes. Psychological functioning includes cognition, communication, mental health, and annoyance. Method: 182 college students participated in the study I in development of a psychological assessment scale and 42 paid volunteers participated in the study II to measure psychological responses. The LFN stimuli consisted of 12 different pure tones and 12 different 1 octave-band white noises and each stimulus had 4 different frequencies and 3 different sounds pressure levels. Results: We developed the psychological assessment scale consisting of 17 items with 3 dimensions of psychological responses (i.e., perceived physical, perceived physiological, and emotional responses). The main findings of LFN on the responses were as follows: 1. Perceived psychological responses showed a linear relation with SPL (sound pressure level), that is the higher the SPL is, the higher the negative psychological responses were. 2. Psychological responses showed quadric relations with SPL in general. 3. More negative responses at 31.5Hz LFN than those of 63 and 125Hz were reported, which is deemed to be caused by perceived vibration by 31.5Hz. 'Perceived vibration' at 31.5Hz than those of other frequencies of LFN is deemed to have amplified the negative psychological response. Consequently there found different effects of low frequency noise with different frequencies and intensity (SPL) on multiple psychological responses. Conclusion: Three dimensions of psychological responses drawn in regard to this study differed from others in the frequencies and SLP of LFN. Negative psychological responses are deemed to be differently affected by the frequency, SPL of the LFN and 'feel vibration' induced by the LFN. Application: The psychological scale from our study can be applied in quantitative psychological measurement of LFN at home or industrial environment. In addition, it can also help design systems to block LFN to provide optimal conditions if used the study outcome, .i.e., the relations between physical and psychological responses of LFN.

• Journal of the Korean Magnetics Society
• /
• v.21 no.2
• /
• pp.77-82
• /
• 2011

The use of soft magnetic materials have been increasing in the various industrial fields according to the increasing demand for high performance, automatic, miniaturing equipments in the recent our life. In this study, we investigated the effect of factors on the core loss and magnetic properties of electrical steel and soft magnetic composites. Furthermore, we reviewed the major efforts to reduce the core loss and improve the soft magnetic properties in the two main soft magnetic materials. Domain purification which results from reduced density of defects in cleaner electrical steels is combined with large grains to reduce hysteresis loss. The reduced thickness and the high electrical conductivity reduce the eddy current component of loss. Furthermore, the coating applied to the surface of electrical steel and texture control lead to improve high permeability and low core loss. There is an increasing interest in soft magnetic composite materials because of the demand for miniaturization of cores for power electronic applications. The SMC materials have a broad range of potential applications due to the possibility of true 3-D electromagnetic design and higher frequency operation. Grain size, sintering temperature, and the degree of porosity need to be carefully controlled in order to optimize structure-sensitive properties such as maximum permeability and low coercive force. The insulating coating on the powder particles in SMCs eliminates particle-to-particle eddy current paths hence minimizing eddy current losses, but it reduces the permeability and to a small extent the saturation magnetization. The combination of new chemical composition with optimum powder manufacturing processes will be able to result in improving the magnetic properties in soft magnetic composite materials, too.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2008

We have manufactured and evaluated reference samples for the use of low magnetic moment measurements. Before the measurements, SQUID magnetometers were magnetically shielded from external magnetic noise. We considered the purity including magnetic impurities, the optimum thickness, the modification method, and the shape in the preparation of the samples. Three paramagnetic polycrystaline metal plates of Ti, W, and Al with the area of $4mm{\times}6mm$ were prepared finally. The magnetic moments of these three samples are measured very linear up to the field of 5 T without magnetic hysteresis. The temperature deviated ratios of the magnetic moments for Ti, Al, and W from 290 K to 310 K are 0.7, 1.5, and 0.1 %, respectively. The measured magnetic moments for Ti and W samples by our research team are very well agreeable with those by two SQUID magnetometers and a VSM at Quantum Design via international round robin test. The results suggest that the prepared reference samples are well suited for the use in the low magnetic moment measurement with SQUID based magnetometers.

• Journal of Service Research and Studies
• /
• v.8 no.2
• /
• pp.25-39
• /
• 2018

In the period of great change in human society, a change in educational services is also necessary. Thus, the current research investigates a new model of educational services to prepare people to be successful in an era of service and the fourth industrial revolution. We analyzed all the educational service models from the first educational institution, The Academy, founded by Plato to one of the most innovative institutions, Minerva schools. Then, we designed both an educational institution model and an educational service model that will cultivate and educate prospective students to be multidimensional to fit to the new upcoming eras. Since the era of service in the 21st century is also the era of job creation, we designed models focused on developing the broad knowledge and practical skills need to solve the most complex issues of our time. A new model was designed based on the results of the survey of existing major programs, analysis of the demands of the new generation, competency requirements, and etc. The newly designed conceptual model was improved from study focusing on tools to study that focuses on intrinsic discipline and competence, nurturing dream and imagination. In order to realize the new educational service, we developed technical conditions and a methodology for improving educational service performance. In the future, it is necessary to deepen the study and carry out research on implementing new educational service. In addition, an empirical study of the performance of the new model will also be needed.

• Journal of The Korean Association of Information Education
• /
• v.22 no.1
• /
• pp.61-70
• /
• 2018

It is urgent in the context of the Fourth Industrial Revolution that students become creative and integrative thinkers. In this vein, in the last few years, drawing upon constructivism as an innovative learning paradigm, new coding curricula using MIT's Scratch have been introduced in the number of countries to enhance computational thinking (CT). However, constructivism encouraging collaborative and active learning may not be explicitly utilized in instructional design focusing mainly on learning to code as technical skills - some of which exist today in large numbers of school and after-school code activities. To respond to such a misleading way of developing CT through coding, the present study aims to propose the benefits of CT self-assessment rubrics for primary pre-service teachers within a CT course entitled "Problem Solving by Computational Thinking". Our findings show how meaningful collaborative CT self-assessment in a group impacts their learning of CT. We end this paper with the discussion of implications of our findings for CT assessment towards a new paradigm in education.

• The Journal of Bigdata
• /
• v.5 no.1
• /
• pp.29-39
• /
• 2020

Purpose The atmosphere of respect for individual tastes that have spread throughout society has changed the consumption trend. As a result, the travel industry is also seeing customized travel as a new trend that reflects consumers' personal tastes. In particular, there is a growing interest in 'film-induced tourism', one of the areas of travel industry. We hope to satisfy the individual's motivation for traveling while watching movies with customized travel proposals, which we expect to be a catalyst for the continued development of the 'film-induced tourism industry'. Design/methodology/approach In this study, we implemented a methodology through 'OCR' of extracting and suggesting film location information that viewers want to visit. First, we extract a scene from a movie selected by a user by using 'OpenCV', a real-time image processing library. In addition, we detected the location of characters in the scene image by using 'EAST model', a deep learning-based text area detection model. The detected images are preprocessed by using 'OpenCV built-in function' to increase recognition accuracy. Finally, after converting characters in images into recognizable text using 'Tesseract', an optical character recognition engine, the 'Google Map API' returns actual location information. Significance This research is significant in that it provides personalized tourism content using fourth industrial technology, in addition to existing film tourism. This could be used in the development of film-induced tourism packages with travel agencies in the future. It also implies the possibility of being used for inflow from abroad as well as to abroad.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.205-213
• /
• 2015

Era of multi-channel digital multimedia on the Internet, cable, satellite and IPTV and the growth of new media such as terrestrial broadcast advertising with the poor rating has also dropped sharply. In this situation, terrestrial TV suggesting the introduction for total amount system appearing comments. In this study, the introduction of these intermediate advertising the public and professional awareness about the issue by comparing the introduction for total amount advertising feasibility was done in the purpose. The results were as follows. First, Studies on terrestrial TV suggesting the introduction of total amount system and public opinion about the differences in perception between experts is high. Second, Both the public and professionals about the total amount system preferred application stage were in favor of gradual for/limited permit cross-media. Third, the general population was higher than the positive response from experts about the benefits of the total amount system. Finally, the general public about the disadvantages of the total amount system they were more positive response than the experts. The introduction for total amount system validity of these data for future total amouny system to provide a basis for enforcement is expected to give.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.107-116
• /
• 2018

One of the key mission is to develop and prompte the use National Competency Standards, which is defined to be the systemization of competencies(knowledge, skills and attitudes) required to perform duties at the workplace by the nation for each industrial sector and level. This provides the basis for the design of training and detailed specifications for workplace assessment. To promote the data-driven service improvement, the commercial product Splunk was introduced, and has grown to become an extremely useful platform because it enables the users to search, collect, and organize data in a far more comprehensive, far less labor-intensive way than traditional databases. Leveraging Splunk's built-in data visualization and analytical features, HRD Korea have built custom tools to gain new insight and operational intelligence that organizations have never had before. This paper analyzes the NCS homepage. Concretely, applying Splunk in creating visualizations, dashboards and performing various functional and statistical analysis and structure without Web development skills. We presented practical use and implications through case studies.