• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.233-243
• /
• 2003

With the original Transmission Control Protocol(TCP) design, which is particularly targeted at the wired networks, a packet loss is assumed to be caused by the network congestion. In the wireless environment where the chances to lose packets due to transmission bit errors are not negligible, though, this assumption may result in unnecessary TCP performance degradation. In this paper, we propose three schemes that improve the ability to conceal the packet losses in the wireless network while limiting the degree of violating TCP end-to-end semantics to a temporary incidents. If there happens a packet loss at the wireless link and there is a chance that the loss is noticed by the sending TCP, the proposed schemes send an indirect acknowledgement. Each of the proposed schemes uses different criteria to decide whether there is a chance that the packet loss occurred in the wireless part is noticed by the sender. In order to limit the buffer overhead in the base, the indirect acknowledgements are issued only when the length of buffer is less than a certain threshold. We use simulation to compare the overhead and the performance of the proposed schemes, and to show that the proposed schemes improve the TCP performance compared to Snoop with a limited amount of buffer at the base station.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.5
• /
• pp.669-683
• /
• 2012

The water supply pipes are buried across wide range of areas, so it is hard to spot them using excavation and takes a large amount of expense. Thus, there is a high risk for direct research and application, accompanying many difficulties in implementation of them. Therefore, it is more economical and convenient to use indirect evaluation variables than direct evaluation of the buried pipes in assessing the degree of pipe deterioration. To assess the degree of pipe deterioration using the indirect evaluation variables, it should be done first to identify how and to what extent they affect the degree of deterioration. This study measured the evaluation variables for pipe deterioration using the pipe endoscope and analyzed the measurement results and the degree of impact on the pipes. In addition, this study attempted to evaluate the adequateness of the pipe deterioration evaluation using the indirect variables based on the analysis results. The evaluation variables measured through the pipe endoscope were the thickness of sediments, size of scale, degree of desquamation and condition of connections. For the indirect evaluation variables, the data such as the property data from GIS pipe network map as well as the material, diameter, age and pipe lining material of the pipe, road type, leakage frequency, average water velocity and water pressure using the leakage repair records was collected. Using the collected data, this study comparatively analyzed the indirect evaluation variables for the degree of pipe deterioration and the results from the pipe endoscope to choose appropriate variables for pipe deterioration evaluation and calculated the weights of the indirect variables on the degree of deterioration. The results showed that the order of the impact of indirect variables on deterioration was pipe age > pipe lining material > road type > leakage frequency > average water velocity with their weights of 0.45, 0.20, 0.15, 0.10, and 0.10, respectively. Conclusively, the results suggest that the measures of sediment thickness, scale size, degree of desquamation and condition of connections are appropriate for the evaluation of pipe deterioration and sufficient for the analysis of the impact of the indirect variables on deterioration.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.245-252
• /
• 2018

Objective: We aimed to perform in-vitro evaluation to compare 1) shear bond strength (SBS), adhesive remnant index (ARI), and color change between self-etched and acid-etched primers; 2) the SBS, ARI and color change between direct and indirect bonding; and 3) the enamel roughness (ER) between 12-blade bur and aluminum oxide polisher debonding methods. Methods: Seventy bovine incisors were distributed in seven groups: control (no bonding), direct (DTBX), and 5 indirect bonding (ITBX, IZ350, ISONDHI, ISEP, and ITBXp). Transbond XT Primer was used in the DTBX, ITBX, and ITBXp groups, flow resin Z350 in the IZ350 group, Sondhi in the ISONDHI group, and SEP primer in the ISEP group. SBS, ARI, and ER were evaluated. The adhesive remnant was removed using a low-speed tungsten bur in all groups except the ITBXp, in which an aluminum oxide polisher was used. After coffee staining, color evaluations were performed using a spectrophotometer immediately after staining and prior to bonding. Results: ISONDHI and ISEP showed significantly lower SBS (p < 0.01). DTBX had a greater number of teeth with all the adhesive on the enamel (70%), compared with the indirect bonding groups (0-30%). The ER in the ITBX and ITBXp groups was found to be greater because of both clean-up techniques used. Conclusions: Direct and indirect bonding have similar results and all the primers used show satisfactory adhesion strength. Use of burs and polishers increases the ER, but polishers ensure greater integrity of the initial roughness. Resin tags do not change the color of the teeth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.732-739
• /
• 2016

In Korea, the summer is hot and humid, and much electricity is consumed for air conditioning. Thus, the simultaneous usage of an indirect evaporative cooler and a common air conditioner could reduce the sensible heat and save electricity. This study developed a U-type cross-counter flow indirect evaporative cooler (IEC) made of plastic and paper. The efficiencies were compared with those of a cross-flow IEC. The specimen was $500mm{\times}500mm{\times}1000mm$. the results show that the indirect evaporation efficiencies of the cross-counter flow sample were 6-21% higher than those of the cross-flow sample. The pressure drops of the cross-counter sample were 51-66% higher. Thermal analysis based on the -NTU method predicted the experimental data within 10%. The electrical energy saved by the use of the cross-counter flow IEC was larger than that of the counter flow IEC, and the difference increases with the velocity. However, the the cross-counter IEC is two times larger than the cross-flow IEC, which may increase the material cost and water usage.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.225-232
• /
• 1992

In order to develop an enzyme-linked immunosorbent assay(ELISA) for detecting aflatoxin $B_1(AFB_1)$, we produced and purified antibodies, thereafter established and evaluated methods of direct and indirect competitive ELISA. Anti-AFB, antisera, produced by immunizing rabbits with $AFB_1$-1-(0-carboxymethy1)oxime-bovine serum albumin conjugate ($AFB_1$-BSA), were removed of anti-BSA antibodies by quantitative precipitation reaction and further purified by ammonium sulfate precipitation and DEAE-Sephadex A-50 ion exchange chromatography. Purified IgG fractions were used as anti-$AFB_1$ antibodies. The antibodies, whose titer was deterrnined extremely high above $2 \times 10^6$, showed low cross-reactivity of 3~34% against $AFB_1$ analogues such as G2, B2, and GI. From the standard curves of direct and indirect competitive ELISA for AFBI, the detection ranges were found 0.2~20 and 1~10, 000 ng/ml(ppb) respectively. In their sensitivity, stability, simplicity, and rapidity, the direct method was more suitable than the indirect method for practical use.

• The Journal of the Korea Contents Association
• /
• v.21 no.8
• /
• pp.608-618
• /
• 2021

The aim of this study was to verify the feasibility and reliability of the program outcome indirect measurement tool developed for nursing college students in Korean. 396 nursing students from 5 nursing colleges participated in this study, data were collected from November 22 to December 10, 2019. Data analysis was conducted using the IBM Statistics SPSS 21.0 and AMOS 21.0 programs to analyze item analysis, exploratory and confirmatory factor analysis. As a result of the item analysis, all 79 items were selected for factor analysis. In the exploratory factor analysis, five items that were loaded with other factors were deleted. The final factor loading range was from .37 to .86, and the cumulative explanatory variance for 12 factors was 71.71%. No items were deleted as a result of the confirmatory factor analysis, and the final scale was consisted of 74 items. The average score for scale was 3.78 and Cronbach' α was .98. The feasibility and reliability of the program outcome indirect measurement tool have been verified through this study. Therefore it can be used as a more standardized indirect measurement tool for nursing college students.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.298-309
• /
• 2018

This study examined the multi-functionality of an eco-pastoral system in alpine grassland and measured its economic value. The multi-functionality can be divided into three categories: direct-use value, indirect-use value, and heritage value. Direct-use value includes both extractive (forage and livestock production) and non-extractive (recreation and tourism) functions. Indirect-use value includes the functions of water conservation, soil erosion control, atmospheric control, landscape, livestock-manure management, and forest firebreaks. The heritage value includes the function of species diversity. The results showed that the annual value for 1 hectare of the eco-pastoral system in alpine grassland's direct use was estimated to be 21,090,874 Korean won; the indirect-use value was 15,562,203 won when the landscape in grassland system, and 16,018,224 won when the landscape comprised in silvopastoral system. The value of the species diversity in heritage terms ranged from 767,273 to 1,578,845 won, depending on whether it included any endangered species. The total value of multi-functionality of the eco-pastoral system in alpine grassland was estimated to be a minimum of 37,420,350 won/ha and a maximum of 38,687,942 won/ha. The results of this study can provide useful insights for the eco-pastoral system in alpine grassland policies in Republic of Korea.

• The Journal of Korean Association of Computer Education
• /
• v.18 no.4
• /
• pp.19-30
• /
• 2015

This study investigated the structural relationships among performance expectancy, effort expectancy, social influence, facilitating condition, attitude, usage intention and actual use. In order to examine structural relationships among variables, we surveyed 285 high school students in spring semester of 2014. After collecting data, we examined causal relationships among variables using structural equation modeling. The results of this study were as follows: First, performance expectancy and effort expectancy significantly affected attitude; however, social influence did not. Second, attitude affected usage intention and usage intention significantly affected actual use. Third, the indirect effect of attitude between performance expectancy, effort expectancy and usage intention were significant and the indirect effect of usage intention between attitude and actual was also significant. Finally, the moderating effect of gender and experience were not significant. Based on this study, the practical strategies to facilitate usage intention and actual use of mobile learning of high school students were suggested.

• Journal of Fashion Business
• /
• v.14 no.2
• /
• pp.166-178
• /
• 2010

The purposes of this study were to investigate the impacts of interactivity, site stickiness, and switching barrier on intention to use. For this purpose, the study tested covariance structural model which set relationships among independent variable(interactivity), meditated variables(site stickiness and switching barrier), and dependent variable(intention to use). The data were collected from a sample of 239 internet shopper of college female students. The covariance structural model and research hypothesis analyzed by using SPSS 16.0 and AMOS 5.0 program. The results are as follows: First, the structural model is accepted significantly. Second, interactivity had a positive influence on site stickiness, switching barrier, and intention to use. And it was found to have a indirect effect on intention to use through site stickiness and switching barrier. Third, site stickiness had a positive influence on switching barrier. Forth, site stickiness and switching barrier had a positive impact on intention to use.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.25-32
• /
• 2017

Most of weapon systems use aided navigation system which integrates inertial navigation and aiding sensors to compensate the INS errors increasing with the passage of time. Various aid sensors can be applied such as Global Navigation Satellite System (GNSS), radar, barometer, etc., but there might exist time delay caused by signal processing or transferring aid information. This time delay leads out-of-sequence measurements (OOSM) systems. Previously, optimal and suboptimal measurment update method for OOSM systems, where the time delay length are known, are proposed. However, previous algorithm does not guarantee the positive definite property of covariance matrix. In order to improve numerical stability for aided navigation using delayed-measurement, this paper proposes a new measurement covariance update algorithm be similar to Joseph-form in Kalman filter. Futhermore, we propose how to implement it in indirect feedback Kalman filter structure, which is commonly used in aided navigation systems, for time-delayed measurement systems. Simulation and vehicle test results show effectiveness of a proposed algorithm.