• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2165-2172
• /
• 1995

Optimization of mesh discretization has been proposed to improve the accuracy of limit analysis solution of collapse load by using the Rigid Body Spring Model(R. B. S. M) under the plane strain condition. Moreover, the fracture behaviour of materials was investigated by employing the fracture mechanism of a spring connecting the triangular rigid body element. It has been clarified that the collapse load and the geometry of slip boundary for optimized mesh discretization were close to those of the slip line solution. Further, the wedge-shaped fracture of a cylinder under a lateral load and the central fracture of a strip in the drawing process were well simulated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.273-279
• /
• 1999

In this paper the stress and strain behaivor in near homogeneous isotropic matrix of metal like steel was studied roll forming of thin steel sheet for cylindrical pipe. Analytical results reveals a body which is on the area of square thickness along and perpendicular to the width of thin steel sheet is in the state of plane strain during roll forming. As a result construction of analytical method for calculating deformation load and stably deformed length along the width of strained steel sheet was established. Also loads applied during roll forming were analyzed using two typical thin steel sheet 12.3m thick steel sheet with 42.5kg /mm2 yield strength of pipe and 5.3mm thick steel sheet with 32.5kg/mm2 yield strength of pipe. Through this analysis applicability of the analytical method for deformation load during roll forming of cylindrical thin steel pipe was evaluated with a study of necessary production technology for roll forming and design technology for roll forming machine.

• 소성∙가공
• /
• 제8권6호
• /
• pp.554-562
• /
• 1999

In this paper, the stress and strain behavior in near homogeneous isotropic matrix of metal like steel was studied during roll forming of thin steel sheet for cylindrical pipe. Analytical result reveals a body which is on the area of square thickness along and perpendicular to the width of thin steel sheet is in the state of plane strain during roll forming. As a result, construction of analytical method for calculating deformation load and stably deformed length along the width of strained steel sheet was established. Also, loads applied during roll forming were analyzed using two typical thin steel sheets. 12.3mm thick steel sheet with 42.5kg/㎟ yield strength of pipe and 5.3mm thick steel sheet with 32.5kg/㎟ yield strength of pipe. Through this analysis, applicability of the analytical method for deformation load during roll forming of cylindrical thin steel pipe was evaluated with a study of necessary production technology for roll forming and design technology for roll forming machine.

• 한국강구조학회 논문집
• /
• 제19권1호
• /
• pp.129-137
• /
• 2007

본 연구에서는 X-브레이싱 접합부의 경계조건에 따른 탄성 면외 좌굴하중 및 유효 좌굴길이 계수에 관한 연구를 수행하였다. X-브레이싱의 접합부는 연결방법에 따라 강접합 혹은 단순 연결로 가정할 수 있으며, 이러한 접합부의 경계 조건은 X-브레이싱의 좌굴하중에 영향을 미친다. 본 연구에서는 접합부의 경계 조건에 따른 X-브레이싱의 면외 유효 좌굴길이 계수들을 유도 하였으며, 면외 유효 좌굴계수들은 압축부재와 인장부재의 길이비 $L_P$/$L_T$, 인장력과 압축력의 비 T/P, 및 인장부재와 압축부재의 Euler 좌굴하중의 비 $P_{ET}$/$P_{EP}$의 함수로 나타났다. 이러한 연구결과는 기존 연구자들 및 유한요소해석결과와 비교 분석하여 그 타당성과 적용성을 검증하였다. 마지막으로 유도된 면외 유효 좌굴길이 계수들을 비교하여 접합부의 경계 조건이 X-브레이싱의 면외 좌굴하중에 미치는 영향을 분석하였다.

• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.191-203
• /
• 2006

가정 변형률 9절점 쉘 요소를 이용하여 스티프너로 보강된 적층 복합 보강판의 진동 특성을 연구하였다. 기존의 연구결과들과 비교하기 위하여 대칭으로 적층된 carbon-epoxy 복합재료 적층 판을 사용하였다. 또한 본 연구에서 스티프너를 쉘로 모델링 한 결과들은 보 요소로 모델링 된 결과들과 비교하였다. 비틀림에 약한 스티프너의 경우에 국부 좌굴이 스티프너에서 발생할 수 있다. 이 경우에 스티프너는 쉘로 모델링 하여야 한다. 본 연구는 면내 압축 및 전단하중을 받는 적층 복합 보강 판과 보강되지 않은 적층 복합 판의 연구에 집중되어 있다. 면내 압축 및 전단하중은 적층복합 판의 고유진동수와 진동 모우드를 변화시키고 압축 하중의 증가는 압축 하중이 임계 좌굴하중에 도달하여 진동수가 0 이 될 때 까지 진동수를 감소시킨다. 면내 전단하중의 작용은 그렇지 않은 경우에 비하여 진동수를 증가시켰다. 또한 진동수와 면내 하중 관계 곡선의 교차는 적층 복합 보강판의 진동 모우드를 교체 시킨다. 본 연구에서 제시한 쉘 요소로 적층 복합 보강판을 해석한 결과 참고문헌과 비교하여 매우 정확한 결과를 나타내었다. 그러므로 보강된 적층 복합 판의 면내 전단 및 압축하중의 종류와 크기는 특정한 진동수와 모우드 형상의 조절을 위해 적절하게 선택되어야 한다. 고유치 문제를 풀기 위하여 Lanzcos 방법을 사용하였다.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.580-588
• /
• 2010

OPB(out-of-plane bending)-induced failure of mooring chain was firstly addressed by CALM (catenary anchor leg mooring)-type offloading buoy, located approximately one mile away from the bow of the Girassol FPSO which was installed offshore area of Angola in September 2001. This study deals with verifying the load transfer mechanism between the first free chain link and connected two chain links inside the chain hawse. OPB moment to angle variation relationships are proposed by extensive parametric study where the used design variables are static friction coefficients, proof test loads, nominal tension forces, chain link diameters, chain link grades and chain link types. The stress ranges due to OPB moments are obtained using nonlinear FEAs (finite element analyses). Final stress ranges are derived considering ones from IPT (in-plane tension) forces. Also a formula for OPB fatigue assessment is briefly introduced.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.235-252
• /
• 2016

This paper presents a new numerical solution of the ultimate lateral capacity of rectangular piles in clay. The two-dimensional plane strain finite element was employed to determine the limit load of this problem. A rectangular pile is subjected to purely lateral loading along either its major or minor axes. Complete parametric studies were performed for two dimensionless variables including: (1) the aspect ratios of rectangular piles were studied in the full range from plates to square piles loaded along either their major or minor axes; and (2) the adhesion factors between the soil-pile interface were studied in the complete range from smooth surfaces to rough surfaces. It was found that the dimensionless load factor of rectangular piles showed a highly non-linear function with the aspect ratio of piles and a slightly non-linear function with the adhesion factor at the soil-pile interface. In addition, the dimensionless load factor of rectangular piles loaded along the major axis was significantly higher than that loaded along the minor axis until it converged to the same value at square piles. The solutions of finite element analyses were verified with the finite element limit analysis for selected cases. The empirical equation of the dimensionless load factor of rectangular piles was also proposed based on the data of finite element analysis. Because of the plane strain condition of the top view section, results can be only applied to the full-flow failure mechanism around the pile for the prediction of limiting pressure at the deeper length of a very long pile with full tension interface that does not allow any separation at soil-pile interfaces.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.144-149
• /
• 2001

A study for the structural strength analysis on the doubler plate subjected to the axial, biaxial in-plane compression and shear load has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate, non-linear elasto-plastic analysis is introduced. Gap element modeling for contact effect between main plate and doubler is prepared and nonlinear analysis procedures are illustrated based on MSC/N4W . In addition, some design guides are suggested through the consideration of several important effects such as corrosion of main plate, doubler width, doubler length and doubler thickness. Finally theses results are compared with developed design formula based on the buckling strength and general trends and design guides according to the variation of design parameters are discussed.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.728-736
• /
• 2017

In this study, the bending behavior of cross-laminated timber (CLT) connected by nails were investigated. Especially, the load-carrying capacity of the nail-jointed CLT under out-of-plane bending was predicted by the lateral resistance of the used nails. Three-layer nail-jointed CLT specimens and a nail connection were manufactured by 30 mm (thickness) ${\times}$ 100 mm (width) domestic species (Pinus koraiensis) laminas and Ø$3.15{\times}82mm$ nails using a nail-gun. Shear test for evaluating the nail lateral resistance and bending test for evaluating the load-carrying capacity of the nail-jointed CLT under out-of-plane bending were carried out. As a result, two lateral resistance of the used nail, the 5% fastener offset value and the maximum value, were 913 N and 1,534 N, respectively. The predicted load-carrying capacity of the nail-jointed CLT by the 5% offset nail lateral resistance was similar to the yield points on the actual load-displacement curve of the nail-jointed CLT specimens. Meanwhile, the nail-jointed CLT specimens were not failed until the tension failure of the bottom laminas occurred beyond the maximum lateral resistance of the nails. Thus, the measured maximum load carrying capacities of the nail-jointed CLT specimens, approximately 12,865 N, were higher than the predicted values, 7,986 N, by the maximum nail lateral resistance. This indicates that the predicted load-carrying capacity can be used for designing a structural unit such as floor, wall and roof able to support vertical loads in a viewpoint of predicting the actual capacities more safely.

• Earthquakes and Structures
• /
• 제11권4호
• /
• pp.609-627
• /
• 2016

Results of an experimental program are presented in this paper for the influence of vertical load on the in-plane behavior of masonry infilled steel frames. Five half-scaled single-story, single-bay steel frame specimens were tested under cyclic lateral loading. The specimens included four infilled frames and one bare frame. Two similar specimens as well as the bare frame had moment-resisting steel frames, while the remaining two specimens had pinned steel frames. For each frame type, one specimen was tested under simultaneous vertical and lateral loading, whereas the other was subjected only to lateral loading. The experimental results show that the vertical load changes the cracking patterns and failure modes of the infill panels. It improves dissipated hysteresis energy and equivalent viscous damping. Global responses of specimens, including stiffness and maximum strength, do no change by vertical loading considerably. Regarding the ductility, the presence of vertical load is ignorable in the specimen with moment-resisting frame. However, it increases the ductility of the infilled pinned frame specimen, leading to an enhancement in the m-factor by at least 2.5 times. In summary, it is concluded that the influence of the vertical load on the lateral response of infilled frames can be conservatively ignored.