Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

Thin Steel Sheet Roll Forming and Load Analysis

박판 강대의 롤성형 및 부하 분석

  • 서정현 (경희대학교 기계공학과)
  • Published : 1999.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the stress and strain behavior in near homogeneous isotropic matrix of metal like steel was studied during roll forming of thin steel sheet for cylindrical pipe. Analytical result reveals a body which is on the area of square thickness along and perpendicular to the width of thin steel sheet is in the state of plane strain during roll forming. As a result, construction of analytical method for calculating deformation load and stably deformed length along the width of strained steel sheet was established. Also, loads applied during roll forming were analyzed using two typical thin steel sheets. 12.3mm thick steel sheet with 42.5kg/㎟ yield strength of pipe and 5.3mm thick steel sheet with 32.5kg/㎟ yield strength of pipe. Through this analysis, applicability of the analytical method for deformation load during roll forming of cylindrical thin steel pipe was evaluated with a study of necessary production technology for roll forming and design technology for roll forming machine.

Keywords

References

  1. Journal of the JSTP v.23 no.259 Development of a new Roll forming Process with Vertical Rolls for Electric Resistance Welded Pipe Wataru Mizutani
  2. Journal of the JSTP v.23 no.259 Application and Technics of Cage Forming Method Eiichi Yokoyama;Takaaki Toyooka;Akio Ejima
  3. Journal of the JSTP v.11 no.112 Fundamental Patterns of Strain Path in Roll Forming of sheet Metal through Tandem Mills with Rolls of Circular Arc Groove Hiromu Suzuki;Manabu Kiuchi;Satoshi Nakazima;Masaaki Ichidayama
  4. Kawasaki stell technical report no.4 Steel Sheet Deformation Behavior and Forming Load Determination in the 26-inch Cage Forming ERW Pipe Mill Eiichi Yokoyama;Takaaki Toyooka;Akio Ejima;Yuzo Yoshimoto;Takao Kawate;Kazuyoshi Kuwata
  5. Journal of the JSTP v.38 no.443 Numerical Analysis of Deformation Behaviour of Edge Portion of Sheet Metal at Breakdown Pass in Roll Forming Process Manabu Kiuchi;Feizhou Wang
  6. Journal of the JSTP v.38 no.443 Numerical Analysis of Edge Bending of Sheet Metal by Involute Forming Method M.Kiuchi;Feizhou Wang
  7. Journal of the JSTP v.38 no.443 Proposal of Flexible Edge Forming for ERW Tube Ⅰ Masayuki Yamada;Tateo Yamada
  8. Journal of the JSTP v.27 no.301 Charcateristics of Cross-Sectional Profiles Formed by Fin-Rolls M.Kiuchi;Ken Shintani;Fumio Eto;Toshio Koudabashi
  9. Journal of the JSTP v.10 no.97 Investigation into Roll Forming of Sheet Metal with Calibre Rolls Having Circular Arc Groove Hiromu Suzuki;Manabu Kiuchi;Satoshi Nakajima;Akio Akahori
  10. Kawasaki Steel Giho v.13 no.1 Development of Manufacturing Techniques of Small Diameter ERW Pipe Shuzo Watanabe;Norihiko Kano;Yutaka Hirano;Fumiaki Ode;Eiichi Yokoyama