• 제목/요약/키워드: ignition delay time(time lag)

검색결과 13건 처리시간 0.02초

n-Propanol과 n-Octane 혼합물의 최소자연발화온도의 예측 (Prediction of Autoignition Temperature of n-Propanol and n-Octane Mixture)

  • 하동명
    • 한국가스학회지
    • /
    • 제17권2호
    • /
    • pp.21-27
    • /
    • 2013
  • 화재 및 폭발 방호를 위해서 문헌에서의 최소자연발화온도 값을 사용하는 것이 일반적이다. 본 연구에서, n-Propanol+n-Octane 계의 최소자연발화온도는 ASTM E659 장치를 이용하여 발화지연시간으로부터 측정하였다. 2성분계를 구성하는 n-Propanol과 n-Octane의 측정된 최소자연발화온도는 각 각 $435^{\circ}C$$218^{\circ}C$ 였다. 그리고 두 개의 2성분계에서 측정된 발화지연시간은 제시된 식에 의한 예측된 발화지연시간과 적은 평균절대오차에서 일치하였다.

Ethylbenzene+n-hexanol 계와 ethylbenzene+n-propionic acid계의 최소자연발화온도의 측정 (Measurement of Autoignition Temperature of Ethylbenzene+n-hexanol and Ethylbenzene+n-propionic Acid Systems)

  • 하동명;이성진
    • 한국화재소방학회논문지
    • /
    • 제21권3호
    • /
    • pp.33-40
    • /
    • 2007
  • 화재 및 폭발을 방호하기 위해서 최소자연발화온도는 제시된 낮은 값을 사용하는 것이 일반적이다. 본 연구에서는 ASTM E659-78 장치를 이용하여 가연성 혼합물인 ethylbenzene+n-hexanol 계와 ethylbenzene+n-propionic acid 계의 발화지연시간과 AIT 관계를 측정하였다. 2성분계를 구성하는 순수물질인 ethylbenzene, n-hexanol, n-propionic acid의 측정된 최소자연발화온도는 각각 $475^{\circ}C,\;275^{\circ}C\;and\;511^{\circ}C$였다. 그리고 두 개의 2성분계에서 측정된 발화지연시간은 제시된 식에 의한 예측된 발화지연시간과 적은 평균절대오차에서 일치하였다.

BTX(Benzene, Toluene, Xylenes)의 자연발화온도와 발화지연시간의 측정 (Measurements of Autoigniton Temperature(AIT) and Time Lag of BTX(Benzene, Toluene, Xylenes))

  • 하동명
    • 한국안전학회지
    • /
    • 제21권3호
    • /
    • pp.45-52
    • /
    • 2006
  • The AITs(autoignition temperatures) describe the minimum temperature to which a substance must be heated, without the application of a flame or spark, which will cause that substance to ignite. The AITs are often used as a factor in determining the upper temperature limit for processing operations and conditions for handling, storage and transportation, and in determining potential fire hazard from accidental contact with hot surfaces. The measurement AITs are dependent upon many factors, namely initial temperature, pressure, volume, fuel/air stoichiometry, catalyst material, concentration of vapor, time lag. Therefore, the AITs reported by different ignition conditions are sometimes significantly different. This study measured the AITs of benzene, toluene and xylene isomers from time lag using AS1M E659-78 apparatus. The experimental ignition delay times were a good agreement with the calculated ignition delay times by the proposed equations wtih a few A.A.D.(average absolute deviation). Also The experimental AITs of benzene, toluene, o-xylene, m-xylene and p-xylene were $583^{\circ}C,\;547^{\circ}C,\;480^{\circ}C,\;587^{\circ}C,\;and\;557^{\circ}C$, respectively.

노말프로판올과 노말데칸 혼합물의 최소자연발화온도 측정 및 예측 (Measurement and Prediction of Autoignition Temperature of n-Propanol+n-Decane Mixture)

  • 하동명
    • 한국안전학회지
    • /
    • 제29권6호
    • /
    • pp.55-61
    • /
    • 2014
  • The autoignition temperature (AIT) of a material is the lowest temperature at which the substance will spontaneously ignite in the absence of an external ignition source such as a spark or flame. The AIT may be used as combustion property to specify operating, storage, and materials handling procedures for processs safety. This study measured the AITs of n-Propanol+n-Decane system from ignition delay time(time lag) by using ASTM E659 apparatus. The AITs of n-Propanol and n-Decane which constituted binary system were $435^{\circ}C$ and $212^{\circ}C$, respectively. The experimental AITs of n-Propanol+n-Decane system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D(average absolute deviation).

n-Butanol과 n-Decane계의 최소자연발화온도 측정 및 예측 (Measurement and Prediction of Autoignition Temperature of n-Butanol + n-Decane System)

  • 하동명;홍순강
    • 한국화재소방학회논문지
    • /
    • 제25권6호
    • /
    • pp.184-189
    • /
    • 2011
  • 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-butanol + n-decane 계의 발화지연시간과 AIT관계를 측정하였다. 2성분계를 구성하는 순수물질인 n-butanol과 n-decane의 측정된 최소자연발화 온도는 각 각 $340^{\circ}C$, $211^{\circ}C$였다. 그리고 n-butanol + n-decane계에서 측정된 발화지연시간은 제시된 식에 의한 예측된 발화지연시간과 적은 평균절대오차에서 일치하였다.

노말프로판올과 아세틱에씨드 계의 최소자연발화온도(AIT) 측정 및 예측 (Measurement and Prediction of Autoignition Temperature(AIT) of n-Propanol and Acetic acid System)

  • 하동명
    • 한국안전학회지
    • /
    • 제32권2호
    • /
    • pp.66-71
    • /
    • 2017
  • The autoignition temperature (AIT) is crucial combustible characteristics which need attention in chemical process that handle hazardous materials. The AIT, also to as minimum spontaneous ignition temperature(MSIT), is the lowest temperature of a hot surface at which the substance will spontaneously ignite without any obvious sources of ignition such as a spark or flame. The AIT may be used as combustion property to specify operating, storage, and materials handling procedures for process safety. This study measured the AITs of n-propanol+acetic acid system from ignition delay time(time lag) by using ASTM E659 apparatus. The AITs of n-propanol and acetic acid which constituted binary system were $435^{\circ}C$ and $212^{\circ}C$, respectively. The experimental AITs of n-propanol+acetic acid system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation). In the case of n-propanol and acetic acid system, the minimum autoignition temperature behavior (MAITB), which is lower than the lower AIT, is shown among the two pure substances constituting the mixture.

n-Decane과 Acetic acid 혼합물의 최소자연발화온도 거동 (The Minimum Autoignition Temperature Behavior(MAITB) of n-Decane and Acetic acid Mixture)

  • 하동명
    • 한국안전학회지
    • /
    • 제28권2호
    • /
    • pp.49-54
    • /
    • 2013
  • The autoignition temperature(AIT) is important index for the safe handling of flammable liquids which constitute the solvent mixtures. This study measured the AITs and ignition delay time for n-Decane and Acetic acid system by using ASTM E659 apparatus. The AITs of n-Decane and Acetic acid which constituted binary system were $212^{\circ}C$ and $512^{\circ}C$, respectively. The experimental AITs of n-Decane and Acetic acid system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation). And n-Decane and Acetic acid system was shown the minimum autoignition temperature behavior(MAITB).

노말부탄올과 2차부탄올 계의 최소자연발화온도의 측정 및 예측 (Measurement and Prediction of Autoignition Temperature of n-Butanol and sec-Butanol System)

  • 하동명
    • 한국화재소방학회논문지
    • /
    • 제26권5호
    • /
    • pp.48-53
    • /
    • 2012
  • 최소자연발화온도는 가연성액체의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-Butanol+sec-Butanol 계의 최소자연발화온도와 발화지연시간을 측정하였다. 2성분계를 구성하는 순수물질인 n-Butanol과 sec-Butanol의 최소자연발화온도는 각 각 $340^{\circ}C$, $447^{\circ}C$로 측정되었다. 그리고 측정된 n-Butanol+sec-Butanol 계의 최소자연발화온도는 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다.

벤젠과 노말헥산 혼합물의 최소자연발화온도 거동에 관한 연구 (A Study of Minimum Autoignition Temperature Behavior (MAITB) of Benzene and n-Hexane Mixture)

  • 하동명;김규현
    • 한국화재소방학회논문지
    • /
    • 제27권1호
    • /
    • pp.8-13
    • /
    • 2013
  • 최소자연발화온도는 가연성액체의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 Benzene과 n-Hexane 계의 최소자연발화온도와 발화지연시간을 측정하였다. 2성분계를 구성하는 순수물질인 Benzene과 n-Hexane의 최소자연발화온도는 각 각 $583^{\circ}C$, $240^{\circ}C$로 측정되었다. 그리고 측정된 Benzene과 n-Hexane 계의 최소자연발화온도는 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다.

n-Propanol과 Formic acid계의 최소자연발화온도의 측정 (Measurement of Autoignition Temperature of n-Propanol and Formic acid System)

  • 조영세;하동명
    • 한국화재소방학회논문지
    • /
    • 제27권5호
    • /
    • pp.64-69
    • /
    • 2013
  • 가연성 혼합물의 최소자연발화온도는 가연성액체의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-Propanol과 Formic acid 계의 최소자연발화온도와 발화지연시간을 측정하였다. 2성분계를 구성하는 순수물질인 n-Propanol과 Formic acid의 최소자연발화온도는 각 각 $435^{\circ}C$$498^{\circ}C$로 측정되었다. 그리고 측정된 n-Propanol과 Formic acid 계의 최소자연발화온도는 제시된 식에 의한 예측값과 작은 평균절대오차에서 일치하였다. 그리고 n-Propanol과 Formic acid 계는 일부 혼합 조성에서 두 개의 순수물질 가운데 낮은 AIT보다 낮게 측정된 최소자연발화온도거동(MAITB, Minimum Autoignition Temperature Behavior)을 보이고 있다.