DOI QR코드

DOI QR Code

Measurement and Prediction of Autoignition Temperature of n-Butanol and sec-Butanol System

노말부탄올과 2차부탄올 계의 최소자연발화온도의 측정 및 예측

  • Ha, Dong-Myeong (Dept. of Occupational Health and Safety Engineering, Semyung University)
  • 하동명 (세명대학교 보건안전공학과)
  • Received : 2012.08.09
  • Accepted : 2012.10.12
  • Published : 2012.10.31

Abstract

The autoignition temperature (AIT) is important index for the safe handling of flammable liquids which constitute the solvent mixtures. This study measured the AITs and ignition delay time for n-Butanol+sec-Butanol system by using ASTM E659 apparatus. The AITs of n-Butanol and sec-Butanol which constituted binary system were $340^{\circ}C$ and $447^{\circ}C$, respectively. The experimental AITs of n-Butanol+sec-Butanol system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D. (average absolute deviation).

최소자연발화온도는 가연성액체의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-Butanol+sec-Butanol 계의 최소자연발화온도와 발화지연시간을 측정하였다. 2성분계를 구성하는 순수물질인 n-Butanol과 sec-Butanol의 최소자연발화온도는 각 각 $340^{\circ}C$, $447^{\circ}C$로 측정되었다. 그리고 측정된 n-Butanol+sec-Butanol 계의 최소자연발화온도는 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다.

Keywords

References

  1. F. P. Lees, "Loss Prevention in the Process Industries Vol. 1", 2nd ed., Oxford Butterworth-Heinemann (1996)
  2. D. M. Ha, "Prediction of Autoignition Temperature of n- Decane and sec-Butanol Mixture", Journal of Korean Institute of Fire Science & Engineering, Vol. 26, No. 3, pp. 85-90 (2012). https://doi.org/10.7731/KIFSE.2012.26.3.085
  3. D. M. Ha, "Prediction of Minimum Spontaneous Ignition Temperature(MSIT) of the Mixture of n-Pentanol and Ethylbenzene", Journal of the Korean Institute of Gas, Vol. 16, No. 2, pp. 45-51 (2012). https://doi.org/10.7842/kigas.2012.16.2.45
  4. D. M. Ha, "Characteristics of Auto-ignition for Trichlorosliane and Dichlorosilane-Trichlorosliane Mixtures", Journal of the Korean Institute of Gas, Vol. 14, No. 4, pp. 24-30 (2010).
  5. I. Goldfrab and A. Zinoviev, "A Study of Delay Spontaneous Insulation Fires", Physics Letter, A 311, pp. 491- 500 (2003). https://doi.org/10.1016/S0375-9601(03)00506-1
  6. D. M. Ha and S. K. Hong, "Measurement an Prediction of Autoignition Temperature of n-Butanal+n-Decane System", Journal of Korean Institute of Fire Science & Engineering, Vol. 25, No. 6, pp. 184-189 (2011).
  7. D. Drysdale, "An Introduction to Fire Dynamics", 2nd ed., John Wiley & Sons (1998).
  8. N. N. Semenov, "Some Problems in Chemical Kinetics and Reactivity, Vol. 2", Princeton University Press, Princeton, N.J. (1959).
  9. NFPA, "Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids", NFPA 325M, NFPA (1991).
  10. R. E. Lenga and K. L. Votoupal, "The Sigma Aldrich Library of Regulatory and Safety Data, Volume I-III", Sigma Chemical Company and Aldrich Chemical Company Inc. (1993).
  11. R. J. Lewis, "SAX's Dangerous Properties of Industrial Materials", 11th ed., John Wiley & Son, Inc., New Jersey (2004).
  12. V. Babrauskas, "Ignition Handbook", Fire Science Publishers, SFPE (2003).
  13. C. J. Hilado and S. W. Clark, "Autoignition Temperature of Organic Chemicals", Chemical Engineering, Vol. 4, pp. 75-80 (1972).
  14. A. M. Kanury, "SFPE Handbook of Fire Protection Engineering; Ignition of Liquid Fuels", 2nd ed., SFPE (1995).
  15. G. S. Scott, G. W. Jones and F. E. Scott, "Determination of Ignition Temperature of Combustible Liquids and Gases", Analytical Chemistry, Vol. 20, No. 3, pp. 238- 241 (1948). https://doi.org/10.1021/ac60015a015
  16. M. G. Zabetakis, A. L. Furno and G. W. Jones, "Minimum Spontaneous Ignition Temperature of Combustibles in Air", Industrial and Engineering Chemistry, Vol. 46, No. 10, pp. 2173-2178 (1954). https://doi.org/10.1021/ie50538a047
  17. D. R. Lide, "Handbook Chemistry and Physics", 76th ed., CRC Press (1996).
  18. J. A. Dean, "Lange's Handbook of Chemistry", 14th ed., McGraw Hill (1992).
  19. S. Yagyu, "Systematization of Spontaneous Ignition Temperatures of Organic Compounds (1st Report)", Research Report of the Research, Institute of Industrial Safety, RR-26-5, Japan (1978).