DOI QR코드

DOI QR Code

노말프로판올과 노말데칸 혼합물의 최소자연발화온도 측정 및 예측

Measurement and Prediction of Autoignition Temperature of n-Propanol+n-Decane Mixture

  • 하동명 (세명대학교 보건안전공학과)
  • Ha, Dong-Myeong (Department of Occupational Health and Safety Engineering, Semyung University)
  • 투고 : 2014.08.06
  • 심사 : 2014.11.06
  • 발행 : 2014.12.31

초록

The autoignition temperature (AIT) of a material is the lowest temperature at which the substance will spontaneously ignite in the absence of an external ignition source such as a spark or flame. The AIT may be used as combustion property to specify operating, storage, and materials handling procedures for processs safety. This study measured the AITs of n-Propanol+n-Decane system from ignition delay time(time lag) by using ASTM E659 apparatus. The AITs of n-Propanol and n-Decane which constituted binary system were $435^{\circ}C$ and $212^{\circ}C$, respectively. The experimental AITs of n-Propanol+n-Decane system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D(average absolute deviation).

키워드

참고문헌

  1. V. Babrauskas, "Ignition Handbook", Fire Science Publishers, SFPE, 2003.
  2. C. F. Cullis and C. D. Foster, "Studies of the Spontaneous Ignition in the Air of Binary Hydrocarbon Mixtures", Combustion and Flame, Vol. 23, pp. 347-356, 1974. https://doi.org/10.1016/0010-2180(74)90117-5
  3. D.M. Ha, "Prediction of Autoignition Temperature of n-Propanol and n-Octane Mixture", Journal of the Korean Institute of Gas, Vol. 17, No. 2, pp. 21-27, 2013. https://doi.org/10.7842/kigas.2013.17.2.21
  4. J. Gmehing, U. Onken and W. Arlt, "Vapor-Liquid Equilibrium Data Collection", DECHEMA, 1980.
  5. D. M. Ha, "The Measurement of Fire and Explosion Properties of n-Pentadecane", J. of the Korean Society of Safety, Vol. 28, No. 4, pp. 53-57, 2013. https://doi.org/10.14346/JKOSOS.2013.28.4.053
  6. G.E.P. Box. and N.R. Draper, "Empirical Model-Building and Response Surface", John Wiley and Sons, Inc., 1987.
  7. D. Drysdale, "An Introduction to Fire Dynamics", 2nd ed., Jone Wiley & Sons, 1998.
  8. C. J. Hilado and S.W. Clark, "Autoignition Temperature of Organic Chemicals", Chemical Engineering, Vol. 4, pp.75-80, 1972.
  9. N. N. Semenov, "Some Problems in Chemical Kinetics and Reactivity, Vol. 2", Princeton University Press, Princeton, N.J, 1959.
  10. NFPA, "Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids", NFPA 325M, NFPA, 1991.
  11. R. E. Lenga and K. L. Votoupal, "The Sigma Aldrich Library of Regulatory and Safety Data, Volume I-III", Sigma Chemical Company and Aldrich Chemical Company Inc., 1993.
  12. A. M. Kanury, "SFPE Handbook of Fire Protection Engineering : Ignition of Liquid Fuels", 2nd ed., SFPE, 1995.
  13. R. J. Lewis, "SAX's Dangerous Properties of Industrial Materials", 11th ed., John Wiley & Son, Inc., N.J., 2004.
  14. I. M. Smallwood, "Handbook of Organic Solvent Properties", John Wiley & Sons, 1996.
  15. M. G. Zabetakis, A. L. Furno and G. W. Jones, "Minimum Spontaneous Ignition Temperature of Combustibles in Air", Industrial and Engineering Chemistry, Vol. 46, No. 10, pp.2173-2178, 1954. https://doi.org/10.1021/ie50538a047
  16. J. L. Jackson, "Spontaneous Ignition Temperature - Commercial Fluids and Pure Hydrocarbons-", Industrial and Engineering Chemistry, Vol. 43, No. 12, pp.2869-2870, 1951. https://doi.org/10.1021/ie50504a058
  17. G. S. Scott, G. W. Jones and F. E. Scott, "Determination of Ignition Temperature of Combustible Liquids and Gases", Analytical Chemistry, Vol. 20, No.3, pp. 238-241, 1948. https://doi.org/10.1021/ac60015a015