• Journal of Welding and Joining
• /
• 제22권6호
• /
• pp.50-56
• /
• 2004

MlAB(magnetically impelled arc butt) welding is a sort of pressure welding method by melting two pipe sections with high speed rotating arc and upsetting two pipes in the axial direction. The electro-magnetic force, the driving force of the arc rotation, is generated by interaction of arc current and magnetic field induced from the magnetic flux generator in the welding system. In this study, an openable coil system for the generation of magnetic flux and a 3-dimensional numerical model for analyzing the electro-magnetic field were proposed. Through the fundamental numerical analyses, a magnetic concentrator was adopted for smoothing the magnetic flux density distribution in the circumferential direction. And then a series of numerical analysis were performed for investigating the effect of system parameters on the magnetic flux density distribution in the interested welding area.. Numerical quantitative analyses showed that magnetic flux density distribution generated from the proposed coil system is mainly dependent on the exciting current in the coil and the position of coil or concentrator from the pipe outer surface. And the gap between pipe ends and arc current are also considered as important factors on arc rotating behavior.

• 전자공학회논문지
• /
• 제52권12호
• /
• pp.67-73
• /
• 2015

본 논문에서는 근거리 위치 기반 시스템을 위한 3 - 5 GHz IR-UWB(impulse radio-ultra wide band) RFIC를 제안한다. 수신기의 구조는 에너지 검출 방식으로 설계되었고, 고속 sampling을 하기 위해서 4 bit ADC 와 DLL(delay locked loop) 을 이용하여 equivalent-time sampling 기술을 사용하도록 설계되었다. 송신기는 저전력의 디지털 UWB impulse generator 를 설계하였다. 설계된 IR-UWB RFIC 는 CMOS $0.18{\mu}m$ 공정을 이용하여 제작되었다. 측정된 수신기의 감도는 -85.7 dBm 이며, 송신기와 수신기는 1.8 V 전원 전압에서 각각 32 mA 와 25.5 mA 의 전류를 소모한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.159-165
• /
• 2005

The proposed optical transmitter is composed of FF(flip flop) , PLL (phase locked loop), reference clock generator, serializer and LD driver 10x250 Mb/s data arrays are translated to the 2.5 Gb/s data signal by serializer. In this case, 1 data bus is allocated usually as a reference clock for synchronization. In this proposed optical transmitter, 125 MHz reference clock is generated from 10x250 Mb/s data arrays by reference clock generator. From this method. absent of reference clock bus is available and more data transmission become possible. To achieve high speed operation, the serializer circuit is designed as two stacks. For 10:1 serialization, 10 clocks that have 1/10 lambda differences is essential, so the VCO (voltage controlled oscillator) composed of 10 delay buffers is designed. PLL is for runing at 250 MHz, and dual PFD(phase frequency detector) is adopted for fast locking time. The optical transmitter is designed by using 0.35 um CMOS technology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.361-364
• /
• 2000

In this study, the system which can make the generator's output voltage more stable by using the inverter in terms of PWM method, is designed It is one of the method reducing velocity of the wind in the process of the wind power generation. Thus, in this system, it is necessary to use a excellent current control inverter. So pulse with modulation method with a high-speed switching element is introduced to control the output current. And also, in order to get a fast response when the standard current generated by the vector control algorithm is supplied with the generator, the output control system with the fast response character and the best current control character is suggested. In this way, the result from the introduction of the control system is that a response character to the changable velocity of the wind is excellent, causing the remarkable reduction of the percentage of the harmonic and the outstanding stability of the variation of the output voltage.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1119-1124
• /
• 2018

So far BESS(Battery Energy storage system) has been widely applied to power systems rapidly. Usually it has been used to regulate the renewable energy output and to adjust the power system frequency. In 2013, EPRI has reported a study of utilizing BESS to replace two black start generators of American Electric Power(AEP) that will be demolished. If the BESS can be used as a self-starting generator, it is possible to shorten the long-distance primary transmission line and shorten the restoration time because BESS is capable of the high-speed start and there is no restriction on the installation position. This paper presents a possibility of using BESS as a self-starting generator by using PSCAD/EMTDC in Korean power systems. Herein, the process to estimated the required capacity of BESS is also presented.

• 한국시뮬레이션학회논문지
• /
• 제26권3호
• /
• pp.73-86
• /
• 2017

환경 자료는 M&S(Modeling and Simulation)에서 실험 결과의 신뢰도를 높이는데 중요한 역할을 한다. 특히 국방 M&S에서는 극한 기상 현상들이 가상훈련 및 실험에서 중요하게 활용될 수 있다. 그러나 환경 자료는 여러 기관에 분산되어 있고, 방대하다. 이 때문에 M&S 운영자들이 실제 환경 자료에서 극한 기상 현상이 발생한 일자와 지역을 선정하여 획득하는 것은 어려운 일이다. 퍼지논리 기반의 환경 자료 검색 기술은 환경 시나리오 발생기 개발의 핵심 기술 중 하나이다. 연구결과 4개의 주요 매개변수(RV, MF, FRA, MRV)로 구성된 퍼지 검색 알고리즘을 제시하였다. 이 연구는 강풍을 동반한 호우 발생 일자를 검색하기 위해 RV는 풍속과 강수량을 위해 각각 14 m/s와 80 mm/d, FRA는 0.2, MRV는 1, 그리고 MF는 시그모이드를 활용할 것을 제안한다. 이 연구에서 제안하는 알고리즘은 국방 M&S에서 필요로 하는 극한 기상 현상들이 발생한 일자를 검색하는데 매우 유용할 것으로 기대된다.

• 대한전기학회논문지
• /
• 제34권12호
• /
• pp.472-484
• /
• 1985

A design of robust voltage controller for high speed excitation of synchronous machine was carried out by pole assignment techniques. An affine map from characteristic polynomial coefficients to feedback parameters is formulated in order to place the system eigen values in the desired region. The feedback parameters determined from linearized model are tested on nonlinear model subjecting it to small disturbances and system faults to show the effectiveness of the controller designed by the proposed technique. The results obtained indicate that the controller presented improves the dynamic stability and system performances of conventionally controlled synchronous machine significantly.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.737-741
• /
• 2003

The wind power system is spotlighted as one of the no-pollution power generation systems. The system uses winds as power source that are rotated the blade and the rotating power from blade generate the electricity power. Gearbox needs to transfer the wind powers that have the high-torque-low-speed characteristics to generator that have the low-torque-high-speed characteristics. Because the wind power system generally locates the remote place like seaside or mountainside and the gearbox installs on the limited and high placed space, the gearbox of the wind power system is required the optimal space design and high reliability. In this paper, the structure of the gearbox is proposed to achieve the optimal space and efficiency by compounding the planetary gear train that has the high power density and parallel type gear train that has the long service life. The design parameters that are affected the service life are studied. The gear ratio and face width are investigated as an affected parameter for design sensitivity of service life.

• 대한전자공학회논문지SD
• /
• 제48권2호
• /
• pp.55-60
• /
• 2011

그동안 신경망칩의 설계에는 주로 아날로그 Maximum Selector (MS) 회로를 사용하였다. 그러나 집적도가 높아질수록 아날로그 MS회로는 신호의 해상도(Resolution)을 높이는데 어려움이 있다. 반면 디지털 MS 회로는 높은 해상도를 얻기는 쉬우나 속도가 느린 단점이 있었다. 본 논문에서는 신경망칩의 디지털화에 사용하기 위한 MSIT(Maximum Selector with Internal Trigger-Signal) 라는 고속의 디지털 MS회로를 개발하였다. MSIT는 제어신호 발생기를 내장하여 안정적인 동작을 확보하고, 불필요한 대기시간을 없애도록 이를 최적화 함으로써 높은 속도를 얻을 수 있다. 1.2V-$0.13{\mu}m$ 프로세스의 모델파라메터를 사용하여 32 개의 10 비트 데이터에 대하여 시뮬레이션을 수행한 결과 3.4ns의 응답시간을 얻을 수 있었다. 이는 동급의 해상도를 갖는 아날로그 MS회로 보다 훨씬 빠른 속도로써, MSIT와 같은 디지털 MS 회로가 아날로그 MS회로에 비하여 높은 해상도와 빠른 속도를 구현할 수 있음을 보여준다.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.31-40
• /
• 2012

This paper introduces a methodology for NREL 5MW wind turbine, which is the variable speed and variable pitch(VSVP) control system. This control strategy maximizes the power extraction capability from the wind in the low wind speed region and regulates the wind turbine power as the rated one for the high wind speed region. Also, pitch control efficiency is raised by using pitch scheduling.Torque schedule is made of torque table depending on the rotor speed. Torque control is used for vertical region in a torque-rotor speed chart. In addition to these, mechanical loads reduction using a drive train damper and exclusion zone on a torque schedule is tried. The NREL 5MW wind turbine control strategy is comprised by the generator torque and blade pitch control. Finally, proposed control system is verified through GH Bladed simulation.