• Journal of Life Science
• /
• v.33 no.8
• /
• pp.639-650
• /
• 2023

The levels of harmful components in aerosols from heated tobacco products (HTPs) have been reported to be significantly lower than in cigarette smoke. However, it remains unclear whether the use of HTPs can mitigate the cardiovascular risks associated with cigarette smoking (CS). The objective of this study was to investigate the effects of a short-term switch from CS to HTP use on cardiac autonomic regulation (CAR). Seven healthy male smokers completed an open-label, randomized, cross-over trial consisting of five days of CS, use of three different HTPs (IQOS use, IQ; lil SOLID use, LS; lil HYBRID use, LH), or non-smoking (NS). Each session was separated by a one-week washout period, and levels of exhaled carbon monoxide (CO) and carboxyhemoglobin (COHb), systolic (SBP) and diastolic blood pressure (DBP), and heart rate variability (HRV) reflecting CAR were assessed before use of the product assigned to each session and at 24, 48, 72, 96, and 120 hr after use. Levels of exhaled CO and COHb were statistically significantly reduced only during NS. There were no statistical changes in SBP and DBP within any session. However, in HRV spectral analysis, log-transformed high frequency (lnHF) increased statistically significantly in IQ, LS, and NS, respectively. Normalized HF (HFnu) was significantly increased in NS and LH, respectively. lnHF and HFnu showed significant interaction effects. The findings of this study suggest that a short-term switch to HTPs instead of CS may lead to different distribution patterns of CAR, primarily driven by enhanced cardiac vagal tone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.503-510
• /
• 2020

Eco-friendly mountain railways operate on concrete rack tracks embedded on existing sharp curved and steep roads to preserve the environment in mountainous areas. Owing to the narrow roads, single lines are inevitable, and many branches are required. In branches, previous switchers and heating devices cannot be applied, because of the limited spacing for the rack and the slow removal of thick ice. To solve these problems, a switch and a heating device have been developed. The switcher changes the line by moving the block of concrete track with hydraulic actuators. The lack of discontinuity reduces the derailment risk and makes locking simple. The heating device uses high frequency induction coils to increase the efficiency and melt the thick ice rapidly. The prototype switcher and heating device were produced and operated to prove their performance. The heating device yielded a 10 times greater efficiency than the previous one. The switcher and heating device are the essential core technologies for the operation of mountain trams in winter and contribute to the spread of mountain railways to domestic or foreign resort areas by enhancing safety and efficiency. In addition, they can provide transportation rights to local residents in poor winter traffic, and bring about tourism and local economic growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2747-2753
• /
• 2011

In this paper, a PWM current-mode DC-DC boost converter for mobile phone flash application has been proposed. The converter which is operated with 5 Mhz high switching frequency is capable of reducing mounting area of passive devices such as inductor and capacitor, consequently is suitable for compact mobile phones. This boost converter consists of a power stage and a control block. Circuit elements of the power stage are inductor, output capacitor, MOS transistors and feedback resistors. Meanwhile, the control block consists of pulse width modulator, error amplifier, oscillator etc. Proposed boost converter has been designed and verified in a $0.5\;{\mu}m$ 1-poly 2-metal CMOS process technology. Simulation results show that the output voltage is 4.26 V in 3.7 V input voltage, output current 100 mA which is larger than 25 ~ 50 mA in conventional 500 Khz driven converter when the duty ratio is 0.15.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.117-125
• /
• 2007

Recently, a fuel cell with low voltage and high current output characteristics is remarkable for new generation system. It needs both a DC-DC step-up converter and DC-AC inverter to be used in fuel cell generation system. Therefor, this paper, consists of an isolated DC-DC converter to boost the fuel cell voltage 380[VDC] and a PWM inverter with LC filter to convent the DC voltage to single-phase 220[VAC]. Expressly, The fuel cell system which it proposes DC-DC the efficient converter used PWM the phase transient control law and it depended to portion resonance ZVS switching, loss peek voltage and electric current of realization under make schedule, switching frequency anger and the switch reduction. And mind benevolence it sprouted 2 in stop circuit and it added and a direct current voltage and the electric current where the ingredient is reduced in load side ripple stable under make whom it will be able to supply. Besides the efficiency of 92[%]is obtained over the wide output voltage regulation ranges and load variations. Also, under make over together the result leads simulation and test, the propriety confirmation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.71-80
• /
• 2007

This paper presents a new push-push VCO technique that extracts a second harmonic output signal from a capacitive commonnode in a negativegm oscillator topology. The generation of the $2^{nd}$ harmonics is accounted for by the nonlinear current-voltage characteristic of the emitter-base junction diode causing; 1) significant voltage clipping and 2) different rising and falling time during the switching operation of core transistors. Comparative investigations show the technique is more power efficient in the high-frequency region that a conventional push-push technique using an emitter common node. Prototype 12GHz and 17GHz MMIC VCO were realized in GaInP/GaAs HBT technology. They have shown nominal output power of -4.3dBm and -5dBm, phase noise of -108 dBc/Hz and -110.4 dBc/Hz at 1MHz offset, respectively. The phase noise results are also equivalent to a VCO figure-of-merit of -175.8 dBc/Hz and -184.3 dBc/Hz, while dissipate 25.68mW(10.7mA/2.4V) and 13.14mW(4.38mA/3.0V), respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.13-20
• /
• 2008

In this paper, an 1.8V 12-bit 10MSPS CMOS A/D converter (ADC) is described. The architecture of the proposed ADC is based on a folding and interpolation using an even folding technique. For the purpose of improving SNR, cascaded-folding cascaded-interpolation technique, distributed track and hold are adapted. Further, a digital encoder algorithm is proposed for efficient digital process. The chip has been fabricated with $0.18{\mu}m$ 1-poly 4-metal n-well CMOS technology. The effective chip area is $2000{\mu}m{\times}1100{\mu}m$ and it consumes about 250mW at 1.8V power supply. The measured SNDR is about 46dB at 10MHz sampling frequency.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.158-165
• /
• 2010

This study reviewed terahertz technologies of time domain spectroscopy, T-ray imaging, and high rate wireless data transfer. The main topics of the terahertz research area were investigation of materials and package modules for terahertz wave generation and detection, and setup of the terahertz system for time domain spectroscopy(TDS), T-ray imaging and sub-THz wireless communication. In addition to Poly-GaAs film as a photoconductive switching antenna material, a table-top scale for the THz-TDS/imaging system and terahertz continuous wave(CW) generation systems for sub-THz data transfer and narrow band T-ray imaging were designed. Dielectric properties of ferroelectric BSTO($Ba_xSr_{1-x}TiO_3$) films and chalcogenide glass systems were characterized with the THz-TDS system at the THz frequency range. Package modules for terahertz wave transmitter/receiver(Tx/Rx) photoconductive antenna were developed.

• Journal of Korea Multimedia Society
• /
• v.7 no.9
• /
• pp.1233-1239
• /
• 2004

In a speech coding system using excitation source of voiced and unvoiced, it would be involved a distortion of speech qualify in case coexist with a voiced and an unvoiced consonants in a frame. This paper present a new multi-pulse coding method by using V/S/TSIUVC switching, individual pitch pulses and TSIUVC approximation-synthesis method in order to restrict a distortion of speech quality. The TSIUVC is extracted by using the zero crossing rate and individual pitch pulse. And the TSIUVC extraction rate was 91% for female voice and 96.2% for male voice respectively. The important thing is that the frequency information of 0.347kHz below and 2.813kHz above can be made with high quality synthesis waveform within TSIUVC. I evaluate the MPC use V/UV and the FBD-MPC use V/S/TSIUVC. As a result, I knew that synthesis speech of the FBD-MPC was better in speech quality than synthesis speech of the MPC.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1315-1324
• /
• 2018

A novel three-phase four-wire inverter topology is presented in this paper. This topology is equipped with a special capacitor balance grid without magnetic saturation. In response to unbalanced load and unequal split DC-link capacitors problems, a qusi-full-bridge DC/DC topology is applied in the balance grid. By using a high-frequency transformer, the energy transfer within the two split dc-link capacitors is realized. The novel topology makes the voltage across two split dc-link capacitors balanced so that the neutral point voltage ripple is inhibited. Under the condition of a stable neutral point voltage, the three-phase four-wire inverter can be equivalent to three independent single phase inverters. As a result, the three-phase inverter can produce symmetrical voltage waves with an unbalanced load. To avoid forward transformer magnetic saturation, the voltages of the primary and secondary windings are controlled to reverse once during each switching period. Furthermore, an improved mode chosen operating principle for this novel topology is designed and analyzed in detail. The simulated results verified the feasibility of this topology and an experimental inverter has been built to test the power quality produced by this topology. Finally, simulation results verify that the novel topology can effectively improve the inhibition of an inverter with a three-phase unbalanced load while decreasing the value of the split capacitor.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.11
• /
• pp.65-71
• /
• 2010

This paper presents a 14-band LO generator architecture for MB-OFDM UWB systems using 3.1 GHz~10.6 GHz frequency band. The proposed LO generator architecture has been consisted of only one PLL and the fewest nonlinear components to generate 14 LO signals with high purity while consuming low dc power consumption. In addition, major spurious generated from the LO generator have been located in the out of UWB band. The proposed LO generator has been implemented in a $0.13-{\mu}m$ CMOS technology and consumes a dc power consumption of 93~103 mW from a 1.5 V supply. The simulation results show an in-band spurious suppression ratio of more than 41 dBc and a band-switching time of below 3 nsec.