• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.135-141
• /
• 2010

Recently, to ensure the stability of flood control, instead of removal of concrete revetment, the vegetation mat method has been widely used on the recovery soil. However, the recovery soil method often failed to be stable against the flood, which caused the economic loss. In this study, the rate of soil loss and the velocity distribution on high water revetment are evaluated by the hydraulic experiments. The maximum difference of the soil loss rate was 52% depending on the vegetation. The reduction of the soli loss rate according to the vegetation is large when the revetment slope is steep. The maximum soil loss rate is 19.5% when there is no vegetation.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.86-92
• /
• 2004

Lab-scale experiments have been carried out to investigate ammonia stripping with a modified spray tower for removing ammonia nitrogen from swine wastewater. The operating conditions such as initial pH, temperature, air flow, hole size of distributor determining the diameter of water drops, and influent solids concentration were closely examined focusing on removal efficiency of ammonia. As a result of the experiment, in order to achieve high rate of ammonia removal by the air stripping system, the air flow rate must be supplied at high rate with sufficiently high initial pH, temperature. The optimum operating condition to meet the residual ammonia concentration of 300 mg/L was the initial pH of 11.0 at $35^{\circ}C$ with the air flow rate of 20 L/min. It also showed that the smaller hole size is, the higher removal rate of ammonia is expected. However, when used a small sized distributor (2 mm), the flooding problem at the upper column occurred due to clogging of the hole. With regard to the influent solids concentration, it was showed that the lower concentration of solids, the higher removal rate of ammonia. The removal of particulate materials in influent led to improve the removal efficiency of ammonia, rather than to control the operating condition including initial pH, temperature, and air flow. The empirical correlation between KLa and operating parameters would be driven as, $K_{La}=(0.0003T-0.0047){\cdot}G^{0.3926}{\cdot}L^{-0.5169}{\cdot}C^{-0. 1849}$. The calculated $K_{La}$ from proposed formula can be used effectively to estimate the optimum reaction time and to calculate the volume of modified spray tower system.

• Composites Research
• /
• v.12 no.5
• /
• pp.40-53
• /
• 1999

The interlaminar facture behavior of multidirectional carbon-fiber/epoxy composite laminates under low and high rates of test, up to rate of about 11.4m/s has been investigated using the double cantilever beam specimens. The mode I loasing with rates above 1.0m/s had considerable dynamic effects on the load-time curves and thus revealed higher values of the average crack velocity than thet expected from a simple proportional relationship with the test rate. The modified beam analysis utilizing only the opening displacement and crack length exhibited an effective means for evaluating the dynamic fracture energy $G_{IC}$. Flexural modulus increased gradually with an increase of the test rate, which was utilized in the evaluation of $G_{IC}$. Values of $G_{IC}$ at the crack initiation and arrest were scarcely changed with increasing test rate up to 1.0m/s. However the maximum $G_{IC}$ was much enlarged at 11.4m/s due to the large amount of fiber bridging the crack tip. The larger the initial crack length, the smaller the maximum $G_{IC}$ at high rate.

• Journal of the Korean Society of Combustion
• /
• v.22 no.4
• /
• pp.19-26
• /
• 2017

This study investigates the gasification of coal char by $CO_2$ under high pressures in a drop tube furnace(DTF). The rate constants are derived for the shrinking core model using the conventional method based on the set reactor conditions. The computational fluid dynamic(CFD) simulations adopting the rate constants revealed that the carbon conversion was much slower than the experimental results, especially under high temperature and high partial pressure of reactants. Three reasons were identified for the discrepancy: i) shorter reaction time because of the entry region for heating, ii) lower particle temperature by the endothermic reaction, and iii) lower partial pressure of $CO_2$ by its consumption. Therefore, the rate constants were corrected based on the actual reaction conditions of the char. The CFD results updated using the corrected rate constants well matched with the measured values. Such correction of reaction conditions in a DTF is essential in deriving rate constants for any char conversion models by $H_2O$ and $O_2$ as well as $CO_2$.

• Ocean Science Journal
• /
• v.40 no.2
• /
• pp.79-89
• /
• 2005

Laboratory radiotracer experiments were conducted to determine assimilation efficiencies (AE) from ingested algal food and oxic sediment particles, uptake rates from the dissolved phase, and the efflux rates of Cd, Cr and Zn in the Asiatic clam Corbicula fluminea. Among three elements, AE from both algal and sediment food was greatest for Cd, followed by Zn and Cr. The AEs of tested elements from algal food (Phaeodactylum tricornutum) were consistently higher than those from sediments at a given salinity and temperature. The influence of salinity (0, 4 and 8 psu) and temperature (5, 13 and $21^{\circ}C$) on the metal AEs was not evident for most tested elements, except Cd AEs from sediment. The rate constant of metal uptake from the dissolved phase $(k_u)$ was greatest for Cd, followed by Zn and Cr in freshwater media. However, in saline water, the $(k_u)$ of Zn were greater than those of Cd. The influx rate of all tested metals increased with temperature. The efflux rate constant was greatest for Cr $(0.02\;d^{-1})$, followed by Zn $(0.010{\sim}0.017\;d^{-1})$ and $Cd\;(0.006\;d^{-1})$. The efflux rate constant for Zn in clam tissues depurated in 0 psu $(0.017\;d^{-1})$ was faster than that in 8 psu $(0.010\;d^{-1})$. Overall results showed that the variation of salinity and temperature in estuarine systems can considerably influence the metal bioaccumulation potential in the estuarine clam C. fluminea. The relatively high Cd accumulation capacity of C. fluminea characterized by the high AE, high dissolved influx rate and low efflux rate, suggested that this clam species can be used as an efficient biomonitor for the Cd contamination in freshwater and estuarine environments.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.153-159
• /
• 2004

The purpose of this research is to investigate the performance of swirl combustion chamber diesel engine by changing the jet passage area, the depth and shape of the piston top cavity (main chamber). The performance of diesel engine with newly changed swirl combustion chamber was tested through the experimental conditions as engine speed, load and injection timing etc. The test results were compared and analyzed. And another purpose of this research is to make a new diesel engine that is satisfied fuel consumption and regulation value of exhaust gas. 1. The rate of fuel consumption was affected significantly by the jet passage area at the high speed and load than low speed and low load. The influence of jet passage large area was proven to decrease the rate of fuel consumption. 2. Smoke was affected significantly by the depth of the piston top cavity, but exhaust temperature and the rate of fuel consumption wasn't affected. The rate of fuel consumption was affected by changing injection timing. 3. The rate of fuel consumption, exhaust temperature and Smoke were affected significantly by the shape of the piston top cavity from rectangular to trapezoid. That is we have all high value. The exhaust smoke density and exhaust gas temperature depended sensitively on variation of the injection timing rather than the shape of the combustion chamber within the experimental conditions. 4. We made a new diesel engine that is satisfied design target values(sfc=190 g/hr, NOx + THC=6.0 g/KWh, PM=0.3 KWh), the rate of fuel consumption and emission standard etc., through changing injection timing at the maximum torque point and rated power point. Although we have a little high NOx value.

• Journal of Surface Science and Engineering
• /
• v.47 no.3
• /
• pp.109-115
• /
• 2014

High power impulse magnetron sputtering (HIPIMS), also known as the technology is called peak power density in a short period, you can get high, so high ionization sputtering rate can make. Higher ionization of sputtered species to a variety of coating materials conventional in the field of improving the characteristics and self-assisted ion thin film deposition process, which contributes to a superior being. HIPIMS at the same power, but the deposition speed is slow in comparison with DC disadvantages. Since recently as a replacement for HIPIMS modulated pulse power (MPP) has been developed. This ionization rate of the sputtered species can increase the deposition rate is lowered and at the same time to overcome the problems to be reported. The differences between the MPP and the HIPIMS is a simple single pulse with a HIPIMS whereas, MPP is 3 ms in pulse length is adjustable, with the full set of multi-pulses within the pulse period and the pulse is applied can be micro advantages. In this experiment, $In_2O_3$ : $SnO_2$ composition ratio of 9 : 1 wt% target was used, Ar : $O_2$ flow rate ratio is 4.8 to 13.0% of the rate of deposition was carried out at room temperature. Ar 40 sccm and the flow rate of $O_2$ and then fixed 2 ~ 6 sccm was compared against that. The thickness of the thin film deposition is fixed at 60 nm, when the partial pressure of oxygen at 9.1%, the specific resistance value of $4.565{\times}10^{-4}{\Omega}cm$, transmittance 86.6%, mobility $32.29cm^2/Vs$ to obtain the value.

• Journal of Embryo Transfer
• /
• v.18 no.3
• /
• pp.187-193
• /
• 2003

Recently a protocol was developed that precisely synchronizes the time of ovulation in Hanwoo. Cows were treated with GnRH on Day 0, PGF$_2$$\alpha$ 7 d later, GnRH 2 d later, and then time-inseminated approximately 24 h after this second treatment with GnRH. Ovarian morphology was monitored cows by trans-rectal ultrasonography 6.5MHz linear transrectal probe(Sonovet - 600., Medison co. Korea) from 24 hr to 31 hrs after second GnRH injection. The result obtained summarized as follows - 1. Induced ovulation were 24 to 31hr after the second GnRH injection, but high induced ovulation was 28hr. 2. Conception rate with HML(High meat lin) and HIL(High milk lin) treatment were 48.1％(38/79) and 43.9％(40/91), respectively. 3. Conception rate of 1∼2 parity and 3∼4 parity was 44.3％ and 55％, respectively. 4. Conception rate of spring, autumn was more increased, 47.3％ than summer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.66-77
• /
• 1998

The purpose of this study is on identifying real condition of naturalized plants in urban green space. For this, Chollabak-do region was selected for case study. The occurring frequency and distribution status was investigated by field survey. The area of green open space, level of management and passed years after construction etc, were analized to identify the influence on occurrence of naturalized plants. The result is as follows: 1. In 18 sites, 145 taxa as weed species including naturalized plants were occurred. Average No. of occurring taxa is 22.7. Two families of plants, Graminae and compositae charged the most part. Also the rate of naturalized plant among them is 29.7%. 2. Naturalized species showing high occurring rate are 14 taxa of compositae, 5 taxa of Gramineae, Leguminosae and 4 taxa of cruciferae. These plants of previous four somatic polymorphism among all the naturalized plants. 3. The taxa number of naturalized plants were reducedby intensive management. But the rate of naturalized plants in extensively managed area was relatively lower than intensively managed one. Naturalizd plants were widely distributed in most of urban green space with being cognitioned as whole weed. 4. In origin of naturalized plants, the taxa from north America were 16 and the taxa from Europe were 16. Therefore the rate originated from north America and Europe charged high part as 68.2%. The rate of Annual, Biennial and Perennial were each 78.7%, 21.3%. The alternative of management for control aganist disturbance by Annual & Biennial required. 5. Multi-relations analysis shows 0.81 which is the relatively high interralation between the number of emerged axa and that of naturalized ones. 6. The number of naturalized species has no relation to the lapse of years after construction of open-space. Especially it was identified that weed control in the beginning of construction is very important. On the other hand the relation between Ys and Xp was Ys=1.784Xp+4.646.

• Clinical and Experimental Reproductive Medicine
• /
• v.32 no.2
• /
• pp.91-99
• /
• 2005

Objective: To define an appropriate vitrification condition of preantral follicle that yields high survival and to evaluate growth and ovulation rate of mouse follicles during in vitro culture after vitrification. Methods: Preantral follicles were isolated mechanically from mouse ovaries that were surgically recovered from mice aged 14 days. Retrieved preantral follicles were placed in EG (Ethylene Glycol) for 2, 5, 10 minutes and transferred to EFS-40 (40% EG, 18% Ficoll-70, 0.5 M sucrose) for 0.5, 1, 2 minutes. And then, preantral follicles were placed onto an EM grid and submerged immediately in liquid nitrogen. Thawing was carried out at room temperature. After defining the most appropriate vitrification condition that yields high survival, in vitro growth and ovulation rate of follicles were evaluated. Results: Appropriate vitrification condition that yield high survival rate ($83.2{\pm}2.1%$) of preantral follicle was EG for 5 minutes and EFS-40 for 0.5 minutes. In vitro survival rate of the vitrified preantral follicles were $85.5{\pm}0.5%$, $67.9{\pm}0.8%$ and $40.2{\pm}0.5%$ on day 2, 6 and 10. And in vitro growth of the vitrified preantral follicles were $107.1{\pm}16.1{\mu}m$, $117.1{\pm}18.4{\mu}m$, $178.4{\pm}45.6{\mu}m$ and $325.4{\pm}54.4{\mu}m$ on day 0, 2, 6 and 10. Although in vitro survival rate and growth of vitrified preantral follicles were lower than that of non-vitrified preantral follicles, the patterns of survival and growth were similar in vitrified and non-vitrified preantral follicles. The ovulation rate of antral follicles that was grown from vitrified preantral follicles was $32.6{\pm}1.2%$. Conclusion: Vitrified preantral follicles could be grown to antral sizes, and mature oocytes that can be used for IVF-ET programs were produced successfully. These data suggest that cryopreservation of preantral follicle by vitrification can be used for the preservation of the fertility.