• Investigative Magnetic Resonance Imaging
• /
• v.23 no.3
• /
• pp.251-258
• /
• 2019

Purpose: To assess the feasibility of the use of spin-echo echo-planar imaging (SE-EPI) magnetic resonance elastography (MRE) in livers of children and young adults. Materials and Methods: Patients (${\leq}20$ years old) who underwent 3T SE-EPI MRE were included retrospectively. Subjects were divided into three groups according to the purpose of the liver MRI: suspicion of fatty liver or focal fat deposition in the liver (FAT group), liver fibrosis after receiving a Kasai operation from biliary atresia (BA group), and hepatic iron deposition after receiving chemotherapy or transfusions (IRON group). Technical failure of MRE was defined when a stiffness map showed no pixel value with a confidence index higher than 95%, and the patients were divided as success and failure groups accordingly. Clinical findings including age, gender, weight, height, and body mass index and magnetic resonance imaging results including proton density fat fraction (PDFF), $T2^*$, and MRE values were assessed. Factors affecting failure of MRE were evaluated and the image quality in wave propagation image and stiffness map was evaluated using the appropriate scores. Results: Among total 240 patients (median 15 years, 211 patients in the FAT, 21 patients in the BA, and 8 patients in the IRON groups), technical failure was noted in six patients in the IRON group (6/8 patients, 75%), while there were no failures noted in the FAT and BA groups. These six patients had $T2^*$ values ranging from 0.9 to 3.8 ms. The image quality scores were not significantly different between the FAT and BA groups (P > 0.999), while the scores were significantly lower in the IRON group (P < 0.001). Conclusion: The 3T SE-EPI MRE in children and young adults had a high technical success rate. The technical failure was occurred in children with decreased $T2^*$ value (${\leq}3.8ms$) from iron deposition.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.525-532
• /
• 2021

In the ocean, it is difficult to separate the effects of one cause due to the multiple causes, but the self-organizing map can be analyzed by adding other factors to the cluster result. Therefore, in this study, the results of the clustering of sea level data were applied to sea surface temperature. Sea level data was clustered into a total of 6 nodes. The difference between sea surface temperature and sea level height has a one-month delay, which applied sea surface temperature data a month ago to the clustered results. As a result of comparing the mean of sea surface temperature of 140 to 150°E, where the sea surface temperature was variously distributed, in the case of nodes 1, 3, and 5, it was possible to find a meandering sea surface temperature distribution that is clearly distinguished from the sea level data. While nodes 2, 4 and 6, the sea surface temperature distribution was smooth. In this study, sea surface temperature data were applied to the clustered results of sea level data, but later it is necessary to apply wind or geostrophic velocity data to compare.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.409-416
• /
• 2009

Forest biomass estimation is essential for greenhouse gas inventories and terrestrial carbon accounting. Remote sensing allows for estimating forest biomass over a large area. This study was conducted to estimate forest biomass and to produce a forest biomass map for Muju county using forest biomass conversion table developed by field plot data from the 5th National Forest Inventory and Landsat TM-5. Correlation analysis was carried out to select suitable independent variables for developing regression models. It was resulted that the height class, crown closure density, and age class were highly correlated with forest biomass. Six regression models were used with the combination of these three stand variables and verified by validation statistics such as root mean square error (RMSE) and mean bias. It was found that a regression model with crown closure density and height class (Model V) was better than others for estimating forest biomass. A biomass conversion table by model V was produced and then used for estimating forest biomass in the study site. The total forest biomass of the Muju county was estimated about 8.8 million ton, or 128.3 ton/ha by the conversion table.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.73-81
• /
• 2015

The objective of this study is in investigating the research for more accurately quantify the information on mountain forest by using the data on high density LiDAR. For the quantitative analysis of mountain forest resources, we investigated the method to acquire the data on high density LiDAR and extract mountain forest resources. Consequently, the height and girth of a tree each mountain forest resources could be extracted by using the data on high density LiDAR. When using the data on low density LiDAR of 2.5points/m² in average used to produce digital map, it was difficult to extract the exact height and girth of mountain forest resources. If using the data on high density LiDAR of 7points/m² by considering topography, the property of mountain forest resources, data capacity and process velocity, etc, it was found that multitudinous entities could be extracted. It was found that mountain topography and mixed topography were generally denser than plane topography and multitudinous mountain forest resources could be extracted. Furthermore, it was also found that the entity at the border could not be extracted, when each partition was individually processed and the area should be subdivided and extracted by considering the process time and property of target area rather than processing wide area at once. We expect to be studied more profoundly the absorption quantity of greenhouse gas later by using information on mountain forest resources in the future.

• Journal of Korea Game Society
• /
• v.10 no.6
• /
• pp.157-168
• /
• 2010

A terrain is an essential element for constructing a virtual world in which game characters and objects make various interactions with one another. Creating a terrain requires a great deal of time and repetitive editing processes. This paper presents a 3D terrain reconstruction system to create 3D terrain in virtual space based on real terrain data. In this system, it converts the coordinate system of the height maps which are generated from a stereo camera and a laser scanner from global GPS into 3D world using the x and z axis vectors of the global GPS coordinate system. It calculates the movement vectors and the rotation matrices frame by frame. Terrain meshes are dynamically generated and rendered in the virtual areas which are represented in an undirected graph. The rendering meshes are exactly created and updated by correcting terrain data errors. In our experiments, the FPS of the system was regularly checked until the terrain was reconstructed by our system, and the visualization quality of the terrain was reviewed. As a result, our system shows that it has 3 times higher FPS than other terrain management systems with Quadtree for small area, improves 40% than others for large area. The visualization of terrain data maintains the same shape as the contour of real terrain. This system could be used for the terrain system of realtime 3D games to generate terrain on real time, and for the terrain design work of CG Movies.

• Atmosphere
• /
• v.26 no.1
• /
• pp.111-126
• /
• 2016

In the numerical weather model, surface properties can be defined by various parameters such as terrain height, landuse, surface albedo, soil moisture, surface emissivity, roughness length and so on. And these parameters need to be improved in the Seoul metropolitan area that established high-rise and complex buildings by urbanization at a recent time. The surface roughness length map is developed from digital elevation model (DEM) and it is implemented to the high-resolution numerical weather (WISE-WRF) model. Simulated results from WISE-WRF model are analyzed the relationship between meteorological variables to changes in the surface roughness length. Friction speed and wind speed are improved with various surface roughness in urban, these variables affected to temperature and relative humidity and hence the surface roughness length will affect to the precipitation and Planetary Boundary Layer (PBL) height. When surface variables by the WISE-WRF model are validated with Automatic Weather System (AWS) observations, NEW experiment is able to simulate more accurate than ORG experiment in temperature and wind speed. Especially, wind speed is overestimated over $2.5m\;s^{-1}$ on some AWS stations in Seoul and surrounding area but it improved with positive correlation and Root Mean Square Error (RMSE) below $2.5m\;s^{-1}$ in whole area. There are close relationship between surface roughness length and wind speed, and the change of surface variables lead to the change of location and duration of precipitation. As a result, the accuracy of WISE-WRF model is improved with the new surface roughness length retrieved from DEM, and its surface roughness length is important role in the high-resolution WISE-WRF model. By the way, the result in this study need various validation from retrieved the surface roughness length to numerical weather model simulations with observation data.

• Journal of Korean Society of Forest Science
• /
• v.95 no.4
• /
• pp.483-494
• /
• 2006

We conducted QTL mapping for 6-year growths of open-pollinated half-sib progenies from a selected clone 7-1037 in Pinus taeda. With an AFLP marker analysis on haploid DNA samples from the megagametophytes of the open-pollinated seeds, we constructed 20 framework maps spanning a total of 1,869 cM in total length and 18.5 cM in an average interval length between markers. Composite interval mapping reveals that one QTL explains 5.9% of the total phenotypic variation of height, and three QTLs account for 3.9~5.6% of the variation of diameter at breast height (DBH). There are no correlations between the QTLs. The genetic effects of the QTLs are 39.6 cm in height and 7.20~9.41 mm in DBH, respectively, The average effects of gene substitution of the markers closely linked with the QTLs are 44.3 cm in height and 8.38~11.81 m in DBH. Under an assumption that the within-family heritability for the growth traits of loblolly pine is less than 0.2, the QTLs account for 26.8% of the additive genetic variance of the progenies. In terms of relative selection efficiency, the individual selection based on QTL markers could be 5 times as high as phenotypic selection. The results in this study indicate that the QTL mapping method with open-pollinated half-sib family could be more practical and applicable to the conventional seed orchard-based selection work than other mapping methods with a single full-sib family, in particular from the viewpoint that it can provide crucial information for within-family individual selection such as breeding value.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.85-92
• /
• 2008

An RIL population from a Shinpaldalkong2/GC83006 cross was employed to identify quantitative trait loci (QTL) associated with agronomic traits in soybean. The genetic map consisted of 127 loci which covered about 3,000cM and were assigned into 20 linkage groups. Phenotypic data were collected for the following traits; plant height, leaf area, flowering time, pubescence color, seed coat color and hilum color in 2005. Seed weight was evaluated using seeds collected in 2003 to 2005 at Suwon and in 2005 at Pyeongchang and Miryang sites. Three QTLs were associated with 100-seed weight in the combined analysis across three years. Among the three QTLs related to seed weight, all GC83006 alleles on LG O ($R^2\;=\;12.5$), LG A1 ($R^2\;=\;10.1$) and LG C2 ($R^2\;=\;11.5$) increased the seed weight. A QTL conditioning plant height was linked to markers including Satt134 (LG C2, $R^2\;=\;25.4$), and the GC83006 allele increased plant height at this QTL locus. For two QTLs related to leaf area, 1aM on LG M ($R^2\;=\;10.0$) and laL on LG L ($R^2\;=\;8.6$), the Shinpaldalkong2 alleles had positive effect to increase the leaf area. Satt134 on LG C2 ($R^2\;=\;41.0$) was associated with QTL for days to flowering. Satt134 (LG C2) showed a linkage to a gene for pubescence color. Satt363 (LG C2) and Satt354 (LG I) were linked to the hilum color gene, and Sat077 (LG D1a) was linked to the seed coat color. The QTL conditioning plant height was in the similar genomic location as the QTLs for days to flowering in this population, indicating pleiotropic effect of one gene or the tight linkage of several genes. These linked markers would be useful in marker assisted selection for these traits in a soybean breeding program.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.399-408
• /
• 2010

The characteristics of lifted laminar propane flames diluted with nitrogen have been investigated experimentally to elucidate self-excitation and the effects of flame curvature. Flame oscillation modes are classified as follows: oscillation induced by heat loss, a combination of oscillations induced by heat loss and buoyancy, and a combination of the oscillations induced by heat loss and diffusive thermal instability. It is shown that the oscillation induced only by heat loss is not relevant to the diffusive thermal instability and hydrodynamic instability caused by buoyancy; this oscillation is observed under all lift-off flame conditions irrespective of the fuel Lewis number. These experimental evidences are displayed through the analysis of the power spectrum for the temporal variation of lift-off height. The possible mechanism of the oscillation induced by heat loss is also discussed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.1
• /
• pp.55-63
• /
• 2006

This study was carried out to analyze community character and classify forest community with phytosociological method and quadrat method to forest of Mt. Busosan in Buyeo-Gun.1. Communities by phytosociological method were classified into Pinus densiflora community and Quercus sp. community. With the classification of TWINSPAN, the community was categorized into Pinus densiflora - Quercus variabilis community and Pinus densiflora - Styrax japonica community.2. The importance value of Pinus densiflora, Quercus acutissima, Prunus sargentii, Styrax japonica, Quercus serrata, Quercus variabilis, Pinus rigida, Quercus aliena in tree layer were 83.20, 41.87, 30.93, 24.85, 23.27, 20.97, 20.28, and 9.46, respectively. The relative coverage of Stephanandra incisa, Quercus serrata, Styrax japonica, Parthenocissua tricuspidata, Rhododendron mucronulatum, Lindera obtusiloba, Prunus sargentii, Quercus variabilis, Indigofera kirilowii, Quercus acutissima, Lespedeza maximowiczii, and Acer pseudosibolianum in shrub layer were 9.62%, 9.55%, 9.18%, 7.85%, 6.18%, 5.25%, 4.82%, 4.15%, 3.98%, 3.98%, 3.55%, and 2.98%, respectively.3. According to size distribution map of diameter breast height of dominant species, the dominant species of Mt. Busosan was Pinus densiflora, and Quercus sp. such as Quercus acutissima, Quercus variabilis, and Quercus serrata may compete with the Pinus densiflora in the future.4. According to the ordination analysis of Mt. Busosan forest, Pinus densiflora - Styrax japonica community was found in moist site and Pinus densiflora - Quercus variabilis community was found in dry site.