• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.251-255
• /
• 2015

Thermal deformation, such as bending and twisting, occurs among the polymer parts of air-conditioner indoor units because of repetitive temperature change during heating operation. In this study, a numerical method employing finite-element analysis to efficiently simulate the thermal deformation of an assembly is proposed. Firstly, the displacement of an actual assembly produced by thermal deformation was measured using a 3D optical measurement system. The measurement results indicated a general downward sag of the assembly, and the maximum displacement value was approximately 1 mm. The temperature distribution was measured using a thermographic camera, and the results were used as initial-temperature boundary conditions to perform temperature-displacement analysis. The simulation results agreed well with the measured data. To reduce the thermal deformation, the stiffness increased 100%. As the results, the maximum displacement decreased by approximately 5.4% and the twisting deformation of the holder improved significantly.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3396-3402
• /
• 2014

세라믹 사출공정(CIM)으로 성형되는 전자제품 케이스와 같은 판상 제품은 강도 보장을 위한 형상설계가 매우 중요하다. 본 연구에서는 CIM으로 성형된 판상 시편의 두께에 따른 3점 굽힘 시험을 통해 굽힘 강도 및 탄성계수를 도출하여 기계적 특성을 분석했다. 두께 0.48mm 시편은 파단하중이 82.9~94.5N이고, 1.0mm 시편은 233.6~345.8N으로 측정되었다. 시편의 두께가 0.5mm 증가했을 때, 파단하중은 3배가 증가하고 탄성계수는 20%가 감소하는 경향을 확인할 수 있었다. 또한 비커스 경도시험을 통해 시편의 두께가 두꺼워질수록 상대밀도와 표면경도가 작아지는 것을 보였다. 이러한 현상은 두께가 두꺼울수록 소결공정 이후 세라믹 혼합물 중 세라믹 분말의 체적분율이 작아지기 때문으로, 이에 따라 기계적 물성이 부분적으로 변할 수 있음을 실험과 해석결과 비교 분석을 통해 밝혔다.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.429-436
• /
• 2013

본 논문에서는 고주파 열처리된 SAE1055 베어링강의 경도에 따른 피로 거동 및 이의 확률론적 평가를 수행하였다. 이를 위하여 경도 수준에 따른 5 종류의 시험편(A : 원재료, B : HV390-전경화, C : HV510-전경화, D : HV700-전경화 및 E : HV-700 표면경화)를 준비하였다. 피로시험은 4 점 회전굽힘 피로시험기를 이용하여 응력비 R=-1 의 조건하에서 수행하였다. 그 결과, SAE1055 강의 피로 거동은 경도에 따라 크게 변화하였으나 HV510 수준이상에서는 피로한도의 증가는 관찰되지 않았다. 또한 피로 파손기구에 대한 경도의 영향을 평가하기 위하여 SEM(scanning electron microscope)을 이용한 파면 관찰을 수행하였다. 피로수명의 통계적 특성은 P-S-N(probabilistic S-N) 곡선을 이용하여 평가되었으며 이에 대한 경도의 영향은 잔류치 해석(residue analysis)을 통하여 수행하였다.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.524-531
• /
• 2004

To investigate relevance of the definition of the reference stress to estimate J and $C^{*}$ for surface crack problems, this paper compares FE J and $C^{*}$ results for surface cracked pipes with those estimated according to the reference stress approach using various definitions of the reference stress. Pipes with part circumferential inner surface crack and finite internal axial crack are considered, subject to internal pressure and global bending. The crack depth and aspect ratio are systematically varied. The reference stress is defined in four different ways using (i) the local limit load, (ii) the global limit load, (iii) the global limit load determined from the FE limit analysis, and (iv) the optimized reference load. It is found that the reference stress based on the local limit load gives overall excessively conservative estimates of J and $^{*}$. Use of the global limit load clearly reduces the conservatism, compared to that of the local limit load, although it can provide sometimes non-conservative estimates of J and $^{*}$. The use of the FE global limit load gives overall non-conservative estimates of J and $^{*}$. The reference stress based on the optimised reference load gives overall accurate estimates of J and $^{*}$, compared to other definitions of the reference stress. Based on the present finding, general guidance on the choice of the reference stress for surface crack problems is given.

• 대한조선학회논문집
• /
• 제49권2호
• /
• pp.109-115
• /
• 2012

Slamming phenomenon may occur when a ship navigates a high sea region, where the response of ship can be expected as elastic behaviour and the resultant wave loads may increase. In this paper, numerical analysis of ship motions and wave loads including momentum slamming was performed using the strip theory with regular waves. In order to analyze the effect of slamming force on the global ship motions, time histories of each mode of displacement and forces were simulated by using Newmark-beta time integration scheme. The added mass and damping coefficients calculated by Lewis form method were compared with the results of given references. For verification of numerical results, the motion RAOs of a S175 containership were calculated as an example of application and time histories of respective displacement and vertical bending moment were compared with the results of ITTC workshop benchmark test.

• Structural Engineering and Mechanics
• /
• 제6권5호
• /
• pp.497-516
• /
• 1998

A relatively simple two-dimensional multilayered shell model is presented for predicting both global quantities and stress distributions across the thickness of multilayered thick shells, that is based on a third-order zig-zag approach. As for any zig-zag model, the layerwise kinematics is accounted for, with the stress continuity conditions at interfaces met a priori. Moreover, the shell model satisfies the zero transverse shear stress conditions at the upper and lower free surfaces of the shell, irrespective of the lay-up. By changing the parameters in the displacement model, some higher order shell models are obtained as particular cases. Although it potentially has a wide range of validity, application is limited to cylindrical shell panels in cylindrical bending, a lot of solutions of two-dimensional models based on rather different simplyfying assumptions and the exact three-dimensional elasticity solution being available for comparisons for this benchmark problem. The numerical investigation performed by the present shell model and by the shell models derived from it illustrates the effects of transverse shear modeling and the range of applicability of the simplyfying assumptions introduced. The implications of retaining only selected terms depending on the radius-to-thickness ratio are focused by comparing the present solutions to the exact one and to other two-dimensional solutions in literature based on rather different simplyfying assumptions.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.258-265
• /
• 2016

A flexible riser consists of several layers which have different materials, shapes and functions. The layers designed properly can take the design load safely, and each property of layer provides a complexity of flexible riser. Such complexity/unit-property is an input for global analysis of flexible riser. There are several approaches to calculate the complexity of flexible riser, those are experimental, numerical and theoretical methods. This paper provides a complexity from numerical and theoretical analysis for 2.5 inch flexible riser of which details and the experimental data are already produced under tension, external pressure, and bending moment. In addition, comparison of stiffness and stress are also provided. Especially, analysis of stress could lead to researches on ultimate strength or fatigue strength of flexible risers.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.65-68
• /
• 2007

FORMOSAT-3 was launched in April of 2006. It consists of six low earth orbit (LEO) satellites that will be eventually deployed to an orbit at 800 km height. Its scientific goal is to utilize the radio occultation (RO) signals to measure the bending angles when the GPS signals transect the atmosphere. The bending angle is then used to infer atmospheric parameters, including refractivity, temperature, pressure, and relative humidity fields of global distributions through inversion schemes and auxiliary information. The expected number of RO events is around 2500 per day, of which 200 events or so fall into the polar region. Consequently, the FORMOSAT-3 observations are expected to play a key role to improve our knowledge in the weather forecasting and space physics research in the polar region. In this paper, we use temperature profiles retrieved from FORMOSAT-3 RO observations to study the climatology of gravity wave activity in the polar region. FORMOSAT-3 can provide about 200 RO observations a day in the polar region, much more than previous GPS RO missions, and, hence, more detailed climatology of gravity wave activity can be obtained.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.1-7
• /
• 2010

Large quantity of bending deformation as well as irregular rotating torque fluctuation are the main struggles of the balance shaft module during a high speed rotation. Since two issues are much sensitive to the location of both supporting bearing and unbalance mass at a balance shaft, it is recommended to construct a design strategy on balance shaft at the early stage so as to save developing time and effort before approaches to the detailed design process. In this paper, an optimal design formulation is proposed to minimize the elastic strain energy due to bending as well as the kinematic energy of polar moment of inertia in rotation. Case studies of optimal design are conducted for different mass ratio as well as linear combination of objective function and its consequence reveals that global optimum of balance shaft model is existed over possible design conditions. Simulation shows that best locations of both supporting bearing and unbalance are globally 20% and 80%, respectively, over total length of a balance shaft.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.413-433
• /
• 2017

The dynamic and structural responses of a 1000-m long circular submerged floating tunnel (SFT) with both ends fixed under survival irregular-wave excitations are investigated. The floater-mooring nonlinear and elastic coupled dynamics are modeled by a time-domain numerical simulation program, OrcaFlex. Two configurations of mooring lines i.e., vertical mooring (VM) and inclined mooring (IM), and four different buoyancy-weight ratios (BWRs) are selected to compare their global performances. The result of modal analysis is included to investigate the role of the respective natural frequencies and elastic modes. The effects of various submergence depths are also checked. The envelopes of the maximum/minimum horizontal and vertical responses, accelerations, mooring tensions, and shear forces/bending moments of the entire SFT along the longitudinal direction are obtained. In addition, at the mid-section, the time series and the corresponding spectra of those parameters are also presented and analyzed. The pros and cons of the two mooring shapes and high or low BWR values are systematically analyzed and discussed. It is demonstrated that the time-domain numerical simulation of the real system including nonlinear hydro-elastic dynamics coupled with nonlinear mooring dynamics is a good method to determine various design parameters.