• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.146-156
• /
• 1989

This paper discusses how to choose speech parameters and decision logics to improve the performance of speaker recognition systems. It also considers the influence of the reference patterns on the speaker recognition. It is observed from the performance analysis based on LPSs, PARCOR coefficients and LPC-cepstrum coefficients that LPC-cepstrum coefficients are superior to the others in speaker recognition without regard to the reference patterns. In order to improve the recognition performance, a new decision logic is proposed based on a generalized-distance concept. It differs from the existing methods in that it considers the statistics of customer and impostors at the same time. It turns out from a speaker verification test that the proposed decision logic ferforms better than the existing ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.862-876
• /
• 1991

In this theses, the procedure for finding the equivalent immittance of an n-line coupled structures is presented in terms of the normal mode parameters of the n-line coupled system. The above generalized equations can be applied to the various Coupled structures including directional couplers, DC blocks, bandpass/band elimination filters, and various other uniformly coupled filters. The design equations are based on a simplified TEM(Quasi TEM) mode. The obtained results and the definition of the scattering parameters for a general coupled line four port with arbitrary terminations are used to present the procedure to determine the optimum physical dimensions matching the given load impedances connected to input, output port. Multiple coupled rnicrostrip two-port with three lines circuit designed shows little discrepancy between the conventional method and this one. Four port with five lines were fabricated on teflon substrate($e$r=2.55) with its thickness h=l.588mm designed at the center frequency, 4 GHz. Their measured results are fairly close to the ones by computation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.327-338
• /
• 1993

This paper proposes a novel method for deriving the Fourier transform pairs of high order pulses given in a generalized form. Primarily, modifying the PRS system model, we establish a new model which simplifies the process of Fourier analysis of the n-th order pulse signal, resulting in a representative relationship. In succession, we present the Frame Formula which plays a role of substituent for the parameters in table look-up procedures. Each look-up table contains all the parameters needed to obtain the Fourier transform of the corresponding pulse of any order. Regarding the amount of calculations and the complexity of procedures required to derive the transforms of pulse signals, analytically or numerically, this method is more compact and timesaving than conventional methods. When pulse has a much narrow width of equivalently higher the order of several pulses, the method presented here acts to the best of its true merit.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.568-586
• /
• 1995

542 periodontal patients having early-onset periodontitis(EOP) have been reclassified into a more homogeneous phenotypic subsets by newly revised radiographic criteria. Representative patients of each EOP subform have been examined of serum IgG subclass antibodies against periodontopathic bacteria, Porphyromonas gingivalis(Pg) 381 and of genetic markers for IgG allotypes to clarify the relationship between these parameters and phenotype expression of each subform. The early onset periodontitis could be reclassified by the radiographic parameters combining the mean interproximal alveolar bone loss(BL) and the radiographic ratio(between 1st molars and the adjacent teeth: Ratio) with statistical significance(p<0.001 by MANOVA). Moreover these EOP subforms could clearly be delineated from adult periodontitis. Of subform I and II(localized type EOP) patients with minimal mean bone loss(BL<5.0), patients demonstrating disease activities in localized areas(Ratio.>1.5) showed the elevated responses in all the IgG subclasses against Pg compared with those of patients without disease activity(Ratio <1.5). There were gradual increase in the IgG2 and IgG4 titers against Pg as the disease developed into the generalized forms suggesting the possible role of these antibodies in modulating the phenotype expression. The genetic marker study for IgG allotype revealed that mean IgG2 and IgG4 subclass titers were significantly higher(p<0.01, p<0.05, respectively) in patients who were positive for G2m(n). This indicated that IgG subclass responsiveness against the bacterial antigens are under the immnuogenetic control. The observed frequencies of G2m(n) were significantly higher (p<0.05) in subfrom IV patients who had the characteristic features of classical rapidly progressing periodontitis indicating the possible genetic predisposition in these patients.

• Wind and Structures
• /
• v.29 no.6
• /
• pp.457-469
• /
• 2019

In this paper, a numerical solution is presented for supersonic flutter analysis of cantilever non-symmetric functionally graded (FG) sandwich plates. The plate is considered to be composed of two different functionally graded face sheets and an isotropic homogeneous core made of ceramic. Based on the first order shear deformation theory (FSDT) and linear piston theory, the set of governing equations and boundary conditions are derived. Dimensionless form of the governing equations and boundary conditions are derived and solved numerically using generalized differential quadrature method (GDQM) and critical velocity and flutter frequencies are calculated. For various values of the yaw angle, effect of different parameters like aspect ratio, thickness of the plate, power law indices and thickness of the core on the flutter boundaries are investigated. Numerical examples show that wings and tail fins with larger length and shorter width are more stable in supersonic flights. It is concluded for FG sandwich plates made of Al-Al₂O₃ that increase in volume fraction of ceramic (Al₂O₃) increases aeroelastic stability of the plate. Presented study confirms that improvement of aeroelastic behavior and weight of wings and tail fins of aircrafts are not consistent items. It is shown that value of the critical yaw angle depends on aspect ratio of the plate and other parameters including thickness and variation of properties have no considerable effect on it. Results of this paper can be used in design and analysis of wing and tail fin of supersonic airplanes.

• Structural Engineering and Mechanics
• /
• v.72 no.6
• /
• pp.747-762
• /
• 2019

Based on the ball-screw mechanism, a tuned viscous mass damper (TVMD) has been proposed, which has functions of amplifying physical mass of the system and frequency tuning. Considering the sensitivity of a single TVMD's effectiveness to frequency mistuning like that of the conventional tuned mass damper (TMD) and according to the concept of the conventional multiple tuned mass damper (MTMD), in the present paper, multiple tuned mass viscous dampers (MTVMD) consisting of many tuned mass dampers (TVMD) with a uniform distribution of natural frequencies are considered for attenuating undesirable vibration of a structure. The MTVMD is manufactured by keeping the stiffness and damping constant and varying the mass associated with the lead of the ball-screw type inerter element in the damper. The structure is represented by its mode-generalized system in a specific vibration mode controlled using the mode reduced-order method. Modal properties and fundamental characteristics of the MTVMD-structure system are investigated analytically with the parameters, i.e., the frequency band, the average damping ratio, the tuning frequency ratio, the total number of TVMD and the total mass ratio. It is found that there exists an optimum set of the parameters that makes the frequency response curve of the structure flattened with smaller amplitudes in a wider input frequency range. The effectiveness and robustness of the MTVMD are also discussed in comparison with those of the usual single TVMD (STVMD) and the results shows that the MTVMD is more effective and robust with the same level of total mass.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.703-713
• /
• 2001

Derivation procedures of exact dynamic stiffness matrices of thin-walled straight beams subjected to eccentrically axial forces are rigorously presented for the spatial free vibration analysis. An exact dynamic stiffness matrix is established from governing equations for a uniform beam element with nonsymmetric thin-walled cross section. First this numerical technique is accomplished via a generalized linear eigenvalue problem by introducing 14 displacement parameters and a system of linear algebraic equations with complex matrices. Thus, the displacement functions of displacement parameters are exactly derived and finally exact stiffness matrices are determined using element force-displacement relationships. The natural frequencies of nonsymmetric thin-walled straight beams are evaluated and compared with analytical solutions or results by thin-walled beam element using the cubic Hermitian polynomials and ABAQU's shell elements in order to demonstrate the validity of this study.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.4
• /
• pp.509-518
• /
• 2002

In order to perform the spatial buckling and static analysis of the nonsymmetric thin-walled beam-column element, improved exact static stiffness matrices were evaluated using equilibrium equation and force-deformation relationships. This numerical technique was obtained using a generalized linear eigenvalue problem, by introducing 14 displacement parameters and system of linear algebraic equations with complex matrices. Unlike the evaluation of dynamic stiffness matrices, some zero eigenvalues were included. Thus, displacement parameters related to these zero eigenvalues were assumed as polynomials, with their exact distributions determined using the identity condition. The exact displacement functions corresponding to three loadingcases for initial stress-resultants were then derived, by consistently combining zero and nonzero eigenvalues and corresponding eigenvectors. Finally, exact static stiffness matrices were determined by applying member force-displacement relationships to these displacement functions. The buckling loads and displacement of thin-walled beam were evaluated and compared with analytic solutions and results using ABAQUS' shell element or straight beam element.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.87-98
• /
• 2001

Vocal nodule is one of the representative chronic diseases of vocal folds, and it can be cured by surgical removal or voice therapy. The aim of this study is to evaluate the effect of the accent method, one of the popular effective voice therapy, in the patients with vocal nodule. Authors executed the accent method in 17 patients with vocal nodule who visited the Voice & Speech Therapy Clinic, Pusan National University Hospital analysed the voice before and after treatment using the local findings, acoustic analysis and aerodynamic analysis MPT. The voice was analysed with MDVP of CSL and MPT was checked using stop watch. The parameters included Fo, Jitter, Shimmer and noise to harmonic ratio(NHR) as acoustic analysis. The results were obtained as follows. In the evaluation by the local findings, it was improved to 77% in the patients of vocal nodule. Jitter and Shimmer were shown to be improved significantly. In particular, it was shown to be improved significantly in patients with vocal nodule. As the result of this study, the improvement of aerodynamic aspect was more statistically significant than that of acoustic parameters. When I generalized the above mentioned results, we suggest that it is a useful voice therapy which can be helpful to the improvement of voice, applying the accent method to the vocal nodule patients, and there are currently many methods to be used in the voice therapy, but it is thought which the accent method is the good treatment as the alternatives of keeping the continuous medical treatment.

• Journal of Preventive Medicine and Public Health
• /
• v.49 no.3
• /
• pp.153-164
• /
• 2016

Objectives: Previous studies have obtained conflicting findings regarding possible associations between indices measuring carbohydrate intake and dyslipidemia, which is an established risk factor of coronary heart disease. In the present study, we examined crosssectional associations between carbohydrate indices, including the dietary glycemic index (GI), glycemic load (GL), total amount of carbohydrates, and the percentage of energy from carbohydrates, and a range of blood lipid parameters. Methods: This study included 1530 participants (554 men and 976 women) from 246 families within the Healthy Twin Study. We analyzed the associations using a generalized linear mixed model to control for familial relationships. Results: Levels of the Apo B were inversely associated with dietary GI, GL, and the amount of carbohydrate intake for men, but these relationships were not significant when fat-adjusted values of the carbohydrate indices were used. Triglyceride levels were positively associated with dietary GI and GL in women, and this pattern was more notable in overweight participants (body mass index [BMI] ${\geq}25kg/m^2$). However, total, low-density lipoprotein and high-density lipoprotein cholesterol levels were not significantly related with carbohydrate intake overall. Conclusions: Of the blood lipid parameters we investigated, only triglyceride levels were positively related with dietary carbohydrate indices among women participants in the Healthy Twin Study, with an interactive role observed for BMI. However, these associations were not observed in men, suggesting that the association between blood lipid levels and carbohydrate intake depends on the type of lipid, specific carbohydrate indices, gender, and BMI.