• Journal of ILASS-Korea
• /
• v.14 no.4
• /
• pp.147-152
• /
• 2009

Since a liquid-phase LPG injection system allows accurate control of fuel injection and increase in volumetric efficiency, it has advantages in achieving higher engine power and lower emissions compared to the mixer type LPG supplying system. However, this system also leads to an unexpected event called icing phenomenon which occurs when moisture in the air near the injector freezes and becomes frost around the nozzle hole due to extraction of heat from surrounding caused by instant fuel vaporization. As a result, it becomes difficult to control air/fuel ratio in engine operation, inducing exacerbation of engine performance and HC emission. One effort to mitigate icing phenomenon is to attach anti-icing injection tip in the end of nozzle. Therefore, in this study, the effect of engine operation parameters as well as surrounding conditions on icing phenomenon was investigated in a bench test rig with commercially-used anti-icing injection tips. The test results show that considerable ice was deposited on the surface near the nozzle hole of the anti-icing tip in low rpm and low load operating conditions in ambient air condition. This is because acceleration of detachment of deposited ice from the tip surface was induced in high load, high rpm conditions, resulting in decrease in frost accumulation. The results of the bench testing also demonstrate that little or no ice was formed at surrounding temperature below a freezing point since the absolute amount of moisture contained in the intake air is too small in such a low temperature.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.2
• /
• pp.19-27
• /
• 2007

The previous study was conducted to develop an air source multi heat pump system that could be operated with the solar collector and air source heat exchangers as heat source of the system. There is a winter-sowing problems in air source multi heat pump system when the outdoor temperature goes down under freezing point. The winter-sowing problem was solved by adapting R-22 refrigerant as working fluid in the previous study. However, when the system operated at high temperature, another problems are come out such as overheating of the solar collector outlet which lead to the superheat of the compressor inlet of the heat pump system. The condition could deteriorates a compressor in some case. In this study, we installed the anti-superheating devices on the previously developed system. As results of system performance test, COP of the system with anti-superheating technique is 2.4. It is a little improved COP compare to previous study's 2.23. In the results of multi heat source heating system, during operating solar collector, COP is relatively high between $200\;W/m^2$ and $400\;W/m^2$ solar intensity. It is recommended to extend the study on performance optimization with balancing the solar collect and capacity of compressor at higher solar irradiation conditions.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.213-217
• /
• 1988

To investigate the optimal conditions for the storage of fresh garlic bulbs, garlic was stored at the different temperature, relative humidity and moisture content. From the standpoint of weight loss and sprouting ratio of garlic bulbs, the optimal temperature for storage was $-4^{\circ}C$. No significant changes in quality of garlic bulbs occurred even after 10 months of storage, when preserving the completely predried sample at $-4^{\circ}C$. However, freezing injury was observed in sample with incomplete drying or without predrying. From these results, The optimal condition for long term storage of fresh garlic was concluded to preserve at $-4^{\circ}C$ after complete predrying.

• Reproductive and Developmental Biology
• /
• v.28 no.1
• /
• pp.7-12
• /
• 2004

This study was performed to establish the effective culture condition for the establishment of clonal lines from porcine fetal fibroblast cells. Fibroblasts derived from a pig fetus (Day 50) were cultured and passaged two times before use. A single cell was seeded in 96-well plates, cultured in medium supplemented with different concentrations of FBS, catalase or $\beta$-mercaptoethanol ($\beta$ME), and classified by cell size and morphology. Cells were passaged two times into 4-well dish before freezing. The establishment efficiencies were not different among different concentrations of FBS (0.3 to 5.1%). However, population doubling time (PDT) was significantly decreased by increasing the FBS concentration (P＜0.05). The establishment efficiency of $\beta$ME-added group (10.4%) was significantly higher than those of catalase-added and control groups (3.5%, and 3.5%, respectively, p＜0.05), and PDT was significantly decreased (23.6 vs 28.1, and 25.5 h, respectively, p＜0.05). However, catalase did not show a positive effect on the establishment efficiency. Cell size and morphology did not affect the establishment efficiency and PDT of clonal lines. The result of present study shows that the establishment efficiency of clonal cell lines can be enhanced by the culture in media supplemented with 30% FBS and $\beta$ME.

• Preventive Nutrition and Food Science
• /
• v.17 no.2
• /
• pp.166-171
• /
• 2012

6-Shogaol, a dehydrated form of 6-gingerol, is a minor component in ginger (Zingiber officinale Roscoe) and has recently been reported to have more potent bioactivity than 6-gingerol. Based on the thermal instability of gingerols (their dehydration to corresponding shogaols at high temperature), we aimed to develop an optimal process to maximize the 6-shogaol content during ginger extraction by modulating temperature and pH. Fresh gingers were dried under various conditions: freeze-, room temperature (RT)- or convection oven-drying at 60 or $80^{\circ}C$, and extracted by 95% ethanol at RT, 60 or $80^{\circ}C$. The content of 6-shogaol was augmented by increasing both drying and extraction temperatures. The highest production of 6-shogaol was achieved at $80^{\circ}C$ extraction after drying at the same temperature and the content of 6-shogaol was about 7-fold compared to the lowest producing process by freezing and extraction at RT. Adjustment of pH (pH 1, 4, 7 and 10) for the 6-shogaol-richest extract (dried and extracted both at $80^{\circ}C$) also affected the chemical composition of ginger and the yield of 6-shogaol was maximized at the most acidic condition of pH 1. Taken together, the current study shows for the first time that a maximized production of 6-shogaol can be achieved during practical drying and extraction process of ginger by increasing both drying and extracting temperatures. Adjustment of pH to extraction solvent with strong acid also helps increase the production of 6-shogaol. Our data could be usefully employed in the fields of food processing as well as nutraceutical industry.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.138-144
• /
• 2019

To analyze the present state of buildings suspended in Gangwon and estimate the compressive strength by visual inspection and Schmidt hammer method in order to analyze durability etc.. In this study, we analyzed the problems that existed in the location where construction is suspended and efficient management method. Expected construction restoration of construction will be restarted, and important parts of the construction site should be given the best protection measures so that the quality can be maintained thoroughly. The construction of the suspended construction is exposed to the freezing and thawing damage over time. Therefore, it is necessary to take measures such as maintenance, and take protective measures by establishing a plan to improve the durability of buildings that are under construction.

• Journal of Powder Materials
• /
• v.28 no.4
• /
• pp.331-335
• /
• 2021

The effects of drying temperature on the microstructure of porous W fabricated by the freeze-casting process of tert-butyl alcohol slurry with WO₃ powder was investigated. Green bodies were hydrogen-reduced at 800℃ for 1 h and sintered at 1000℃ for 6 h. X-ray diffraction analysis revealed that WO₃ powders were completely converted to W without any reaction phases by hydrogen reduction. The sintered body showed pores aligned in the direction of tert-butyl alcohol growth, and the porosity and pore size decreased as the amount of WO₃ increased from 5 to 10vol%. As the drying temperature of the frozen body increased from -25℃ to -10℃, the pore size and thickness of the struts increased. The change in microstructural characteristics based on the amount of powder added and the drying temperature was explained by the growth behavior of the freezing agent and the degree of rearrangement of the solid powder during the solidification of the slurry.

• Microbiology and Biotechnology Letters
• /
• v.49 no.2
• /
• pp.157-166
• /
• 2021

The probiotic market is constantly continuing to grow, concomitantly with a widening in the range and diversity of probiotic products. Probiotics are defined as live microorganisms that provide a benefit to the host when consumed at a proper dose; the viability of a probiotic is therefore of crucial importance for its efficacy. Many products undergo lyophilization for maintaining their shelf-life. Unfortunately, this procedure may damage the integrity of the cells due to stress conditions during both the freezing and (vacuum-) drying process, thereby impacting their functionality. We propose a lysine-based mixture for rehydration of freeze-dried probiotics for improving their viability during in vitro simulated gastric and duodenum stress conditions. Measurement of the zeta potential served as an indicator of cell integrity and efficacy of this mixture, while functionality was estimated by adhesion to a human enterocyte-like Caco-2 cell-line. The freeze-dried bacteria exhibited a significantly different zeta potential compared to fresh cultures; however, this condition could be restored by rehydration with the lysine mixture. Recovery of the surface charge was found to influence adhesion ability to the Caco-2 cell-line. The optimum lysine concentration of the formulation, designated "Zeta-bio", was found to be 0.03 M for improving the viability of Lactiplantibacillus plantarum Lp-115 by up to 13.86% and a 7-strain mixture (400B) to 41.99% compared to the control rehydrated with distilled water. In addition, the lysine Zeta-bio formulation notably increased the adherence ability of lyophilized Lp-115 to the Caco-2 cell-line after subjected to the in vitro stress conditions of the simulated gastrointestinal tract passage.

• Journal of Animal Reproduction and Biotechnology
• /
• v.37 no.2
• /
• pp.130-135
• /
• 2022

Epididymal sperm cryopreservation provides a potential method for preserving genetic material from males of endangered species. This pilot study was conducted to develop a freezing method for tiger epididymal sperm. We evaluated post-thaw sperm condition using testes with intact epididymides obtained from a Siberian tiger (Panthera tigris altaica) after castration. The epididymis was chopped in Tyrode's albumin-lactate-pyruvate 1x and incubated at 5% CO₂, 95% air for 10 min. The Percoll separation density gradient method was used for selective recovery of motile spermatozoa after sperm collection using a cell strainer. The spermatozoa were diluted with modified Norwegian extender supplemented with 20 mM trehalose (extender 1) and subsequent extender 2 (extender 1 with 10% glycerol) and frozen using LN₂ vapor. After thawing at 37℃ for 25 s, Isolate^® solution was used for more effective recovery of live sperm. Sperm motility (computerized assisted sperm analysis, CASA), viability (SYBR-14 and Propidium Iodide) and acrosome integrity (Pisum sativum agglutinin with FITC) were evaluated. The motility of tiger epididymal spermatozoa was 40.1 ± 2.0%, and progressively motile sperm comprised 32.7 ± 2.3%. Viability was 56.3 ± 1.6% and acrosome integrity was 62.3 ± 4.4%. Cryopreservation of tiger epididymal sperm using a modified Norwegian extender and density gradient method could be effective to obtain functional spermatozoa for future assisted reproductive practices in endangered species.

• Research in Plant Disease
• /
• v.23 no.3
• /
• pp.283-287
• /
• 2017

The twig blight of mulberry caused by Fusarium lateritium occurs mainly in Buan area, which is the main area of mulberry. The initial symptom on twigs showed dark edge blight and dark orange tiny particles on the spot, and it was withered and died. In the case of mulberry twig blight, the difference in the degree of occurrence between the years is intense, and an average of 2.7% occurred in Buan in 2013, but in 2014, it was difficult to search for the generated fields. In order to find the cause of the difference in the incidence of mulberry twig blight, we investigated and analyzed the weather conditions during cultivation and as a result, the occurrence of the disease increased under the condition that the temperature of the spring was lower and the number of days passing below the winter freezing point increased. In addition, it was analyzed that the occurrence of the next year increases when the rainfall is high and the number of sunshine is low after removing the harvested branches. Therefore, in the event that weather conditions causing twig blight diseases have elapsed, it is necessary to prevent the disease by spraying the registered applied fungicide prophylactically.