• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.328-331
• /
• 2001

Shape changes of a workpiece in an Eulerian Finite Element analysis for the steady state. three-roll-stand shape rolling are modelled. Although an Eulerian analysis has many advantages for the steady state rolling problems, it necessitates an assumption about the unknown shape of the control volume. In almost all cases. the assumed control volume does not match the final shape and the control volume should be updated. This update can be accomplished by performing a free surface correction. The final shape of a material point, which has a spherical shape at the inlet, can be also predicted by integrating a deformation gradient along a stream line. Analyses of three-roll-stand shape rolling is in detail examined.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.417-422
• /
• 2002

The main purpose of this paper is to determine the dynamic optimal shapes of tapered column with constant volume. The linear, parabolic and sinusoidal tapers with the regular polygon cross-section are considered, whose material volume and span length are always held constant. The ordinary differential equation including the effect of axial load is applied to calculate the natural frequencies. The Runge-Kutta method and Regula-Falsi methods are used to integrate the differential equation and compute the frequencies, respectively. Then the dynamic optimal shape whose lowest natural frequency is highest is determined by reading the critical value of the frequency versus section ratio curve plotted by the frequency data. In the numerical examples, the tapered columns are analysed and the numerical result of this study are shown in table and figures.

• Korean Journal of Geomatics
• /
• 제2권1호
• /
• pp.25-29
• /
• 2002

The calculation of earthwork plays a major role in plan or design of many civil engineering projects, and thus it has become very important to improve the accuracy of earthwork calculation. In this paper, we propose an algorithm for finding a cubic spline surface with the free boundary conditions, which interpolates the given three dimensional data, by using B-spline and an accurate method to estimate pit-excavation volume. The proposed method should be of interest to surveyors especially concerned with accuracy of volume computations. We present some computational results showing that our proposed method provides good accuracy.

• 한국지역사회생활과학회지
• /
• 제26권3호
• /
• pp.447-456
• /
• 2015

To develop functional bread and improve the quality of gluten-free bread, this study investigates the quality characteristics of gluten-free rice bread made from soft-type rice (Bodeurami) flour mixed with black rice at different levels (0%, 10%, 20%, 30%, and 40%, w/w). An increase in the mix level of black-rice flour increased the weight of rice bread but reduced its volume, baking loss, volume expansion, and specific volume. The results for Hunter's color value and texture measurements indicate that an increase in the content of black-rice flour reduced the L-value, the b-value, hardness, gumminess, and chewiness but increased the a-value, adhesiveness, and springiness. According to the sensory analysis, rice bread formulated with a mixture of soft-type rice flour (80%) and black-rice flour (20%) showed the highest scores in color, taste, texture, and overall preferences. With respect to flavor and appearance, bread samples with 20% and 30% black-rice flour were preferred to those with 0%, 10%, and 40% black-rice flour. These results suggest that gluten-free rice bread mixed with wet-milling rice flour and black-rice flour can be used to develop functional and gluten-free bread.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.88-97
• /
• 2005

A new numerical scheme solving two-phase flow, the Hybrid VOF method for improved free surface capturing has been developed by combining a volume capturing VOF method with the Level-Set reinitialization procedure. For validation, the proposed method is applied to 3-D bubble rising problem, dam breaking and the free surface flow around a commercial container ship. The calculated results by using the Hybrid VOF method with the two previously applied VOF formulations are compared with available numerical and experimental data. It is found that the new method provides more reasonable results than the two previous ones.

• Structural Engineering and Mechanics
• /
• 제82권2호
• /
• pp.151-161
• /
• 2022

In this study, the effect of porosity distribution pattern on the free vibration analysis of porous FG plates with various boundary conditions is studied. The material properties of the plate and the porosities within the plate are considered to vary continuously through the thickness direction according to the volume fraction of constituents defined by the modified rule of the mixture, this includes porosity volume fraction with four different types of porosity distribution over the cross-section. The governing partial differential equation of motion for the free vibration analysis is obtained using hyperbolic shear deformation theory. An analytical solution is presented for the governing PDEs for various boundary conditions. Results of the presented solution are compared and validated by the available results in the literature. Moreover, the effects of material and porosity distribution and geometrical parameters on vibrational properties are investigated.

• Journal of the Korean Data and Information Science Society
• /
• 제17권2호
• /
• pp.529-536
• /
• 2006

Investigators use either Euclidean distance or volume of a simplex defined composed of data points as agreement index to measure chance-corrected agreement among observers for multivariate interval data. The agreement coefficient proposed by Um(2004) is based on a volume of a simplex and does not depend on the variables' measuring units. We consider a comparison of Um(2004)'s agreement coefficient with others based on two unit-free distance measures, Pearson distance and Mahalanobis distance. Comparison among them is made using hypothetical data set.

• Investigative Magnetic Resonance Imaging
• /
• 제13권1호
• /
• pp.63-73
• /
• 2009

배경: 두개강내 용적에 대한 수동과 자동 측정법이 여성 주요 우울증 환자의 해마의 용적측정술과 modulated voxel-based morphometry (mVBM)의 결과에 미치는 영향을 알아보고자 한다. 방법: 21명의 여성 주요 우울증 환자와 성별, 나이의 분포가 비슷한 20명의 여성 정상인을 연구대상에 포함시켰다. 해마와 두개강내 용적은 수동으로 측정하였고, FreeSurfer 프로그램을 이용하여 두개강내 용적을 자동으로 측정하였다. 또한 회색질과 백색질의 부피도 SPM을 이용하여 자동으로 측정하였다. 결과: 수동으로 측정한 두개강의 용적을 통제변인으로 하여 분석한 통계분석의 결과가 FreeSurfer에 의해 측정된 두개강내 용적이나 뇌실질의 용적을 통제변인으로 한 통계분석의 결과보다 우울증 환자의 해마부피 감소와 mVBM 분석의 국조적 부피감소를 보다 민감하게 보여주었다. 수동적인 방법과 FreeSurfer에 의해 측정된 두개강내 용적은 정상인에서는 차이가 없었지만 (p = 0.696), 우울증 환자의 두개강 부피는 FreeSurfer를 이용해 측정한 두 개강의 부피가 더 작았다 (p = 0.000002). 우울증 환자의 전체 회색질의 부피는 수동으로 측정한 두개강의 용적을 통제변인으로 적용하였을 때 정상인의 회색질의 부피보다 작았고 (p = 0.000002), 해마의 부피도 수동으로 측정한 두 개 강의 부피를 통제변인으로 통계처리를 했을 때는 우울증환자의 해마가 뚜렷한 위축을 보였지만 (오른쪽, p = 0.014; 왼쪽, p = 0.004), 다른 측정법을 통제변인으로 했을 때는 유의하지 않았다 (p > 0.05). mVBM 분석에서는 수동으로 측정한 두개강의 부피를 통제변인으로 사용했을 때만 다중비교교정 후에 유의한 결과를 보였다 (FDR p < 0.05). 결론: 수동적인 방법으로 측정한 두개강의 용적이 FreeSurfer에 의해 자동으로 측정된 두개강의 용적이나 뇌실질의 부피보다 해마용적측정술과 mVBM 의 결과에 있어서 더 효율적으로 우울증이 있는 그룹과 없는 그룹의 차이를 보여주는 것에 민감한 결과를 보였다.

• 대한방사선치료학회지
• /
• 제25권2호
• /
• pp.187-192
• /
• 2013

목 적: 좌측 유방암 환자 치료 시 4D-CT를 이용하여 기존에 호흡이 고려되지 않았던 치료와 비교하여 심장의 체적 변화와 호흡에 따른 심장의 선량 차이를 알아보고자 한다. 대상 및 방법: 2012년 3월부터 5월까지 본원에 내원한 2문 접선조사로 치료받은 좌측 유방암 환자 10명을 대상으로 하였다. 좌측 유방이 충분히 포함될 수 있도록 FOV (Field-of-view)를 설정하고 자유 호흡 상태의 일반 CT (Free-Breathing CT)와 4D-CT를 통해 영상을 획득하였다. 선량은 50.4 Gy (1.8 Gy/28 fraction)로 필요에 따라 추가적으로 계획용표적체적(PTV: Planning target volume)에 전자선 1문 조사 9 Gy (1.8 Gy/5 Fraction)를 처방하였고 선량체적히스토그람(Dose Volume Histogram)를 이용하여 심장에 받는 선량과 체적을 비교 분석하였다. 결 과: Free-Breathing CT 영상과 4D-CT 영상의 심장에 받는 선량과 체적을 비교 분석한 결과 4D-CT 영상에서 심장의 체적이 최대 40.5% 크게 나타났으며 또한 심장의 총 흡수선량도 최대, 최소, 평균선량이 최대 8.8%, 27.9%, 37.4% 높게 나타났다. 결 론: 4D-CT를 촬영하여 호흡을 고려한 치료계획이 Free-Breathing CT 영상으로 치료 계획한 것 보다 환자의 심장선량이 높게 조사된 것으로 나타났다. 따라서 심장과 근접한 좌측 유방 방사선치료 시 심장박동에 의한 심장의 체적변화를 고려한 치료계획을 세워야 할 것으로 사료된다.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.607-612
• /
• 2010

Purpose: Maxillectomy for malignant tumor resection often leads to functional and aesthetic sequalae. Reconstruction following maxillectomy has been a challenging problem in the field of head and neck cancer surgery. In this article, we described three dimensional midface reconstructions using free flaps and their functional and aesthetic outcomes. Methods: We reconstructed 35 cases of maxillectomy defects using 9 radial forearm free flaps, 7 lattisimus dorsi musculocutaneous free flaps, 6 rectus abdominis musculocutaneous free flaps, 4 fibular osteocutaneous free flaps, and 9 anterolateral thigh free flaps, respectively. We classified post-maxillectomy defects by Brown's classification. 1 Articulation clarity was measured with picture consonant articulation test. Swallowing function was evaluated with the University of Washington quality-of-life Head and Neck questionnaire by 4 steps.2 Aesthetic outcomes were checked to compare preoperative with postoperative full face photographs by 5 medical doctors who did not involve in our operation. Results: The average articulation clarity was 92.4% (100-41.9%). 27 (81.9%) patients were able to eat an unrestricted diet. Aesthetic results were considered excellent in 18 patients (51.4%). Functional results were best in the group reconstructed with fibular osteocutaneous free flap. Considering the range of wide excision, aesthetic results is best in the group reconstructed with anterolateral thigh free flap. Conclusion: The free flap is a useful technique for the reconstruction of the midface leading to good results, both functionally and aesthetically. Especially, because osteocutaneous flap such as fibular osteocutaneous free flap offered bone source for osteointegrated implant, It produces the best functional results. And perforator flap like as anterolateral thigh free flap reliably provides the best aesthetic results, because it provides sufficient volume and has no postoperative volume diminution.