• Journal of Korean Association for Spatial Structures
• /
• v.2 no.3 s.5
• /
• pp.103-113
• /
• 2002

This thesis investigates vibration response characteristics of building frames in which dampers are installed. The frames belong to passively vibration-controlled. Structures which utilizes energy dissipation of mechanical dampers provided in the structure. In this thesis, a turbulent flow damper sealed by visco-elastic material was dealt with as the device of passive vibration control. To investigate the resisting force characteristics of the damper, harmonic vibratration tests were carried out. Based on the test results, a theoretical model of the damper resistance was presented and a method of identifying the model parameters was proposed. Shaking table tests of the frame with and without the dampers were carried out and the effectiveness of the damper was examined. The response of the frame with the dampers was reduced to 1/2 or 1/3 of the cases without the damper.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.144-148
• /
• 2005

Cylinder frame manufactured by casting is assembled with the components such as cylinder head, cylinder liner and main bearing cap, etc. The mechanical contact between all of the neighboring components due to bolt tightening was taken into consideration. The loads used in structural analysis were the bolt tightening forces induced by hydraulic jack and the dynamic forces calculated from kinematic analysis. The difference of forces between the neighboring cylinders was taken into account. The maximum stress, stress amplitude and mean stress calculated from the results of structural analyses were used to evaluate the static and fatigue strength. Gray cast iron which is material of cylinder frame has the material characteristics of very small elongation and different strength in tension and compression. Based on such an material characteristics, the strength evaluation of cylinder frame was carried out with in-house program developed internally.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2022

Collision analysis involving a vehicle frame that includes a battery and a battery case was performed using a carbon fiber composite material (CFRP) and a glass fiber-reinforced plastic (GFRP), which are lightweight materials. Three types of collisions were analyzed: frontal collisions, partial frontal collisions, and side collisions. The maximum stress and deformation levels were measured for each case. To evaluate the stability of ignition and explosion potential of the battery, the maximum stress of the frame was measured before measuring the direct stress to confirm whether the collision energy was sufficiently absorbed. The deformation level of the battery case was measured to confirm whether the battery case affects the battery directly.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.4
• /
• pp.57-62
• /
• 2019

The seat back frame of the vehicle is subjected to load on the passenger behavior. Because of steel material, it is necessary to optimize the frame considering lightweight and safety. In this paper, finite element analysis is used for the optimal design of the seat back frame. First, a lightweight material is applied to reduce the weight of the seat back frame. Secondly, the design position of the pipe part fastened in the seat back frame was selected by considering the strength against the load generated by the occupant. Third, the shape of the side frame was derived by performing the phase optimization analysis for the AFT load condition. And we have compared the initial model with the optimal model to verify the light weighting and safety. As a result, the optimal design model of the seat back frame satisfying the weight reduction and safety has been proposed.

• Journal of Korean Association for Spatial Structures
• /
• v.3 no.2 s.8
• /
• pp.69-75
• /
• 2003

In case of rectangular lattice dome which shearing rigidity is very small, it has a concern to drop Buckling strength considerably by external force. So, by means of system to increase buckling-strength, there is a method of construction that lattice of dome is one with roof material. In a case like this, shearing rigidity of roof material increases buckling-strength of the whole of structure and can be designed economically from the viewpoint of practice. In case of analysis is achieved considering roof material that adheres to lattice of dame, there is method that considers the rigidity that use effective width frame as method to evaluate rigidity of roof material. therefore, this study is aimed at deciding effective width of roof material united with rectangular lattice dome to evaluate rigidity of roof material by effective width of frame and investigating how much does rigidity of roof material united with lattice of dome increase buckling-strength of the whole of structure according to rise-ratio. Conditions of loading are vertical-type-uniform loading. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1452-1456
• /
• 2008

For the effective use of salmon processing by-products, the food components of salmon frame muscle were investigated and compared with those of fillet muscle. The proximate composition of salmon frame muscle was 73.2 g/100 g muscle for the moisture, 76.9 g/100 g dry material for the protein, 15.7 g/100 g dry material for the lipid and 4.1 g/100 g dry material for the ash. pH and volatile basic nitrogen (VBN) content of salmon frame muscle were 6.63 and 16 mg/100 g, respectively. The proximate composition, pH and VBN of salmon frame muscles were similar to those of salmon fillet muscle. The Hunter values of salmon frame muscle were 55.34 for L value, 16.60 for a value, 19.99 for b value and 48.83 for ${\Delta}E$ value, which were different compared to the salmon fillet muscle. The trichloroacetic acid (TCA) soluble-N content of salmon frame muscle was 542 mg/100 g, which was lower than that of salmon fillet muscle. No difference was found in fatty acid composition, total amino acid, calcium, phosphorus contents and sensory evaluation between salmon frame muscle and salmon fillet muscle. These results suggested that muscle from salmon frame could be used as resources for seafood processing.

• Coupled systems mechanics
• /
• v.11 no.3
• /
• pp.217-231
• /
• 2022

The present paper is concerned with a delamination analysis of a multilayered frame structure that exhibits non-linear creep behavior. A solution to the strain energy release rate is obtained by considering the time-dependent complementary strain energy in the frame. The mechanical behavior of the frame is treated by using a non-linear stress-strain-time relationship. The time-dependent solution to the strain energy release rate obtained in the present paper holds for a multilayered frame made of arbitrary number of adhesively bonded layers of different thicknesses and material properties. Besides, the dealamination is located arbitrary along the thickness. The solution to the strain energy release rate is verifiedby applying the J-integral approach. A parametric study of the strain energy release rate is carried-out. Two three-layered frame configurations are analyzed in order to evaluate the influence of the delamination crack location along the thickness on the strain energy release rate. The strain energy release is analyzed also for the case when a notch is cut-out in the inner delamination crack arm. The results obtained are compared with these for a frame without a notch.

• Korean Journal of Metals and Materials
• /
• v.50 no.8
• /
• pp.563-568
• /
• 2012

The wetting property and reflectivity of Sn-3.5Ag solder which was dip coated on a LED lead frame were investigated. The wettability of molten solder on Cu substrate was evaluated by the wetting balance tester, and surface tension was calculated from maximum withdrawal force and withdrawal time. Temperature of the molten solder in a bath was varied in the range of $250-290^{\circ}C$. With increasing temperature, the surface tension decreased a little. The reflectivity of Sn-3.5Ag coated on a substrate became a little lower than the highest current LED lead frame reflectivity.

• Structural Engineering and Mechanics
• /
• v.58 no.2
• /
• pp.231-242
• /
• 2016

To minimize the compliance of frame, a method to optimize the topology of bracing system in a frame is presented. The frame is first filled uniformly with a truss-like continuum, in which there are an infinite number of members. The frame and truss-like continuum are analysed by the finite element method altogether. By optimizing the distribution of members in the truss-like continuum over the whole design domain, the optimal bracing pattern is determined. As a result, the frame's lateral stiffness is enforced. Structural compliance and displacement are decreased greatly with a smaller increase in material volume. Since optimal bracing systems are described by the distribution field of members, rather than by elements, fewer elements are needed to establish the detailed structure. Furthermore, no numerical instability exists. Therefore it has high calculation effectiveness.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.195-201
• /
• 2003

A fibered element for the material and geometric nonlinear analysis of three-dimensional reinforced and prestressed concrete frame is presented. The fibered frame element is idealized as an assemblage of concrete and reinforcing steel fibers in order to account for varied material properties within the cross section of the frame element through elastic, cracking and ultimated stages of materials. Prestressing tendon is modeled as an assemblage of multilinear prestressing steel segments each of which spans a frame element. The contribution of each prestressing steel is added directly to the fibered frame element. Numerical results from the ultimate analysis of three-dimensional PSC box girder are compared with those obtained from other investigator. The validity and the capability of the present nonlinear analysis model is well demonstrated.