• East Asian mathematical journal
• /
• 제15권2호
• /
• pp.277-290
• /
• 1999

In this paper, we investigate the existence of a two dimensional surface in a four dimensional equiaffine space and characterize that surface.

• 한국실내디자인학회논문집
• /
• 제20권4호
• /
• pp.126-135
• /
• 2011

This study is investigation into the number of major subjects and computer-using subjects in department of interior architecture-related in 2008 & 2010 year. We arranged and analyzed collected data by searching homepages of subjects to survey and was able to reach conclusions as follows : Firstly, the number of department of interior architecture-related has decreased in colleges and universities at the same time in 2010 than 2008. Secondary, computer-using subjects tended to open lower grades than higher grades, so students used to control computer softwares easily. Thirdly, the purposes of computer-related subjects divide to four parts, 2dimensional-drafting, 2dimensional presentation, 3dimensional design, 3dimensional presentation(modeling and rendering included). Fourthly, from average 4.7 to 4.3 subjects have opened each the two year(2008, 2010) in college and from average 4.7 to 2.5 subjects in universities. and each 4(or5) subjects in college and 2(or 3) subjects in universities are opened mostly. Fifthly, Computer-related subjects tend to decrease the number of opening those subjects in universities, however it is necessary to be opened four computer-related subjects at least in order to design by using computer softwares.

• Communications for Statistical Applications and Methods
• /
• 제6권1호
• /
• pp.305-318
• /
• 1999

In this paper we derive the higher order expansions of the first four cumulants of multi-dimensional Maximum Likelihood Estimator (MLE) under the general parametric model up to and including terms of order O({{{{ {n }^{-1 } }}}}) Also we obtain the explicit form of the expansion of the normalizing trans formation of multi-dimensional MLE and show that the suggested normalizing process is much better than the normal approximation based on central limit theorem through example.

• 대한수학회보
• /
• 제43권4호
• /
• pp.679-692
• /
• 2006

On a compact oriented n-dimensional manifold $(M^n,\;g)$, it has been conjectured that a metric g satisfying the critical point equation (2) should be Einstein. In this paper, we prove that if a manifold $(M^4,\;g)$ is a 4-dimensional oriented compact warped product, then g can not be a solution of CPE with a non-zero solution function f.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.29-34
• /
• 1998

An efficient 3-dimensional compressible solver is developed using the second-order upwind TVD scheme and the multigrid diagonalized ADI method. The multigrid method is improved so that the present DADI algorithm obtains better convergence rates. Results are computed on Cray C90 computer for transonic unsaperated flows past ONERA-M6 wing to demonstrate the accuracy and efficiency. The results show good agreement with experimetal data. A reduction of four orders of residual for 3-dimensional transonic flow is obtained about 99 seconds.

• 산업기술연구
• /
• 제14권
• /
• pp.3-17
• /
• 1994

This paper develops a design technique for approximating nonseparable frequency characteristics by sums and products of separable transfer functions. Therefore nonseparable frequency characteristics includes the four-quadrant symmetry filters. The desired filter with half plan symmetry is obtained by shifting a low pass characteristic in the frequency domain, and by combining these shifted characteristics. Also the paper develops the technique for designing recursive and nonrecursive two dimensional digital filters by the application of a complex transformation to one dimensional low pass filter.

• 환경영향평가
• /
• 제11권2호
• /
• pp.109-116
• /
• 2002

The diagnostic and prognostic methods for generating 3 dimensional wind field were comparatively analyzed and 4 dimensional data assimilation (FDDA) technique by incorporating Automatic Weather System (AWS) into the prognostic methods was discussed for the urban scale air quality model. The A WS covered the urban scale grid distance of 10.6 km and 4.3 km in South Korea and Kyong-in region, respectively. This is representing that AWS for FDDA could be fairly well accommodated in prognostic model with the meso${\gamma}$~ microa scale (~5 km), indicating that the 3 dimensional wind field by FDDA technique could be a useful interpretative tool in urban area for the atmospheric environmental impact assessment.

• 대기
• /
• 제25권2호
• /
• pp.235-248
• /
• 2015

In this study, we analyzed the three dimensional variations (latitude, longitude, and height of Jet core) and wind speed of upper Jet stream in the East Asian region using recent 35 years (1979~2013) of four reanalysis data (NCEP-R2, MERRA, ERA-Interim. and JRA-55). Most of Jet core is located in $30.0{\sim}37.5^{\circ}N$ and $13.0{\sim}157.5^{\circ}E$ although there are slight differences among the four reanalysis data. The wind speed differences among reanalysis are about $3m\;s^{-1}$ regardless of seasons, the weakest in NCEP-R2 and the strongest in JRA-55. Although significance level is not high, most of reanalysis showed that the Jet core has a tendency of southward moving during spring and winter, but moving northward during summer and fall. This amplified seasonal variation of Jet core suggests that seasonal variations of weather/climate can be increased in the East Asian region. The longitude of Jet core has a tendency of systematically westward moving and decreasing of zonal variations regardless of averaging methods and reanalysis data. In general, the Jet core shows a tendency of moving south-west-ward and upward, getting intensified during spring and winter regardless of the reanalysis data. However, the Jet core shows a tendency of moving westward and downward, and getting weakened during summer. In fall, there were no distinctive trends not only in wind speed but also three dimensional locations compared to other seasons. Although the significance levels are not high and variation patterns are slightly different according to the reanalysis data, our findings are more or less different from the previous results. So, more works are needed to clarify the three dimensional variation patterns of Jet core over the East Asian region as a result of global warming.

• 한국소음진동공학회논문집
• /
• 제11권5호
• /
• pp.89-100
• /
• 2001

The Ritz method Is applied In a three-dimensional (3-D) analysis to obtain accurate frequencies for thick. linearly tapered. annular plates. The method is formulated for annular plates haying any combination of free or fixed boundaries at both Inner and outer edges. Admissible functions for the three displacement components are chosen as trigonometric functions in the circumferential co-ordinate. and a1gebraic polynomials in the radial and thickness co-ordinates. Upper bound convergence of the non-dimensional frequencies to the exact values within at least four significant figures is demonstrated. Comparisons of results for annular plates with linearly varying thickness are made with ones obtained by others using 2-D classical thin place theory. Extensive and accurate ( four significant figures ) frequencies are presented 7or completely free. thick, linearly tapered annular plates haying ratios of average place thickness to difference between outer radius (a) and inner radius (b) radios (h$_{m}$/L) of 0.1 and 0.2 for b/L=0.2 and 0.5. All 3-D modes are included in the analyses : e.g., flexural, thickness-shear. In-plane stretching, and torsional. Because frequency data liven is exact 7o a\ulcorner least four digits. It is benchmark data against which the results from other methods (e.g.. 2-D 7hick plate theory, finite element methods. finite difference methods) and may be compared. Throughout this work, Poisson\`s ratio $\upsilon$ is fixed at 0.3 for numerical calculations.s.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권3호
• /
• pp.123-129
• /
• 2014

Objectives: The aim of this study was to verify the concordance of the measurement values when the same cephalometric analysis method was used for two-dimensional (2D) cephalometric radiography and three-dimensional computed tomography (3D CT), and to identify which 3D Frankfort horizontal (FH) plane was the most concordant with FH plane used for cephalometric radiography. Materials and Methods: Reference horizontal plane was FH plane. Palatal angle and occlusal plane angle was evaluated with FH plane. Gonial angle (GA), palatal angle, upper occlusal plane angle (UOPA), mandibular plane angle (MPA), U1 to occlusal plane angle, U1 to FH plane angle, SNA and SNB were obtained on 2D cephalmetries and reconstructed 3D CT. The values measured eight angles in 2D lateral cephalometry and reconstructed 3D CT were evaluated by intraclass correlation coefficiency (ICC). It also was evaluated to identify 3D FH plane with high degree of concordance to 2D one by studying which one in four FH planes shows the highest degree of concordance with 2D FH plane. Results: ICCs of MPA (0.752), UOPA (0.745), SNA (0.798) and SNB (0.869) were high. On the other hand, ICCs of gonial angle (0.583), palatal angle (0.287), U1 to occlusal plane (0.404), U1 to FH plane (0.617) were low respectively. Additionally GA and MPA acquired from 2D were bigger than those on 3D in all 20 patients included in this study. Concordance between one UOPA from 2D and four UOPAs from 3D CT were evaluated by ICC values. Results showed no significant difference among four FH planes defined on 3D CT. Conclusion: FH plane that can be set on 3D CT does not have difference in concordance from FH plane on lateral cephalometry. However, it is desirable to define FH plane on 3D CT with two orbitales and one porion considering the reproduction of orbitale itself.