• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.220-223
• /
• 2008

A camera system for the satellite application performs the mission of observation by measuring radiated light energy from the target on the earth. As a development stage of the system, the signal level analysis by estimating the number of electron collected in a pixel of an applied CCD is a basic tool for the performance analysis like SNR as well as the data path design of focal plane electronic. In this paper, two methods are presented for the calculation of the number of electrons for signal level analysis. One method is a quantitative assessment based on the CCD characteristics and design parameters of optical module of the system itself in which optical module works for concentrating the light energy onto the focal plane where CCD is located to convert light energy into electrical signal. The other method compares the design\ parameters of the system such as quantum efficiency, focal length and the aperture size of the optics in comparison with existing camera system in orbit. By this way, relative count of electrons to the existing camera system is estimated. The number of electrons, as signal level of the camera system, calculated by described methods is used to design input circuits of AD converter for interfacing the image signal coming from the CCD module in the focal plane electronics. This number is also used for the analysis of the signal level of the CCD output which is critical parameter to design data path between CCD and A/D converter. The FPE(Focal Plane Electronics) designer should decide whether the dividing-circuit is necessary or not between them from the analysis. If it is necessary, the optimized dividing factor of the level should be implemented. This paper describes the analysis of the electron count of a camera system for a satellite application and then of the signal level for the interface design between CCD and A/D converter using two methods. One is a quantitative assessment based on the design parameters of the camera system, the other method compares the design parameters in comparison with those of the existing camera system in orbit for relative counting of the electrons and the signal level estimation. Chapter 2 describes the radiometry of the camera system of a satellite application to show equations for electron counting, Chapter 3 describes a camera system briefly to explain the data flow of imagery information from CCD and Chapter 4 explains the two methods for the analysis of the number of electrons and the signal level. Then conclusion is made in chapter 5.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.323-333
• /
• 2013

This study investigated the geographic and pairwise distances of nine Chinese local Cashmere goat populations through the analysis of 20 microsatellite DNA markers. Fluorescence PCR was used to identify the markers, which were selected based on their significance as identified by the Food and Agriculture Organization of the United Nations (FAO) and the International Society for Animal Genetics (ISAG). In total, 206 alleles were detected; the average allele number was 10.30; the polymorphism information content of loci ranged from 0.5213 to 0.7582; the number of effective alleles ranged from 4.0484 to 4.6178; the observed heterozygosity was from 0.5023 to 0.5602 for the practical sample; the expected heterozygosity ranged from 0.5783 to 0.6464; and Allelic richness ranged from 4.7551 to 8.0693. These results indicated that Chinese Cashmere goat populations exhibited rich genetic diversity. Further, the Wright's F-statistics of subpopulation within total (FST) was 0.1184; the genetic differentiation coefficient (GST) was 0.0940; and the average gene flow (Nm) was 2.0415. All pairwise FST values among the populations were highly significant (p<0.01 or p<0.001), suggesting that the populations studied should all be considered to be separate breeds. Finally, the clustering analysis divided the Chinese Cashmere goat populations into at least four clusters, with the Hexi and Yashan goat populations alone in one cluster. These results have provided useful, practical, and important information for the future of Chinese Cashmere goat breeding.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2012

Due to the increasing demand to utilize water fronts and water resource effectively, a multi-dimensional model that provides detailed hydraulic characteristics is required in order to improve the decision making process. An EFDC model is a kind of multi-dimension model, and it requires detailed 3D (3-dimensional) terrain in order to simulate the hydraulic characteristics of stream flow. In the case of 3D terrain creation, especially river reaches, measurement resolution and spatial interpolation methods affect the detailed 3D topography which uses input data for EFDC simulation. Such results make hydraulic characteristics to be varied. This study aims to examine EFDC simulation results depending on the 3D topographies derived by separate measurement resolution and spatial interpolation methods. The study area is at the confluence of the Nakdong and Kuemho Rivers and the event rain implemented was Typhoon Ewiniar in 2006. As a result, in the case of the area-elevation curve, the difference by means of the interpolation methods was significant when applying the same measurement resolution, except at 160m resolution. Furthermore, when the measurement resolution was 80m or above, the difference in a cross-section was occurred. Meanwhile, the water level changes between interpolation methods were insignificant by the measurement resolution except when the Kriging method was used for the 160m measurement data. Velocity changes emerged according to the interpolation methods when measurement resolution was 80m or above and the Kriging method resulted in a velocity that had a considerable gap in relation to the results from other methods at a measurement resolution of 160m.

• Journal of KIISE:Software and Applications
• /
• v.35 no.1
• /
• pp.1-11
• /
• 2008

This paper detected the characteristics of motion vector to support efficient content -based video search of video. Traditionally, the present frame of a video was divided into blocks of equal size and BMA (block matching algorithm) was used, which predicts the motion of each block in the reference frame on the time axis. However, BMA has several restrictions and vectors obtained by BMA are sometimes different from actual motions. To solve this problem, the foil search method was applied but this method is disadvantageous in that it has to make a large volume of calculation. Thus, as an alternative, the present study extracted the Spatio-Temporal characteristics of Motion Vector Spatio-Temporal Correlations (MVSTC). As a result, we could predict motion vectors more accurately using the motion vectors of neighboring blocks. However, because there are multiple reference block vectors, such additional information should be sent to the receiving end. Thus, we need to consider how to predict the motion characteristics of each block and how to define the appropriate scope of search. Based on the proposed algorithm, we examined motion prediction techniques for motion compensation and presented results of applying the techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.555-564
• /
• 2016

This paper proposes a time slot allocation scheme for military patrol environments. This proposal comes from analysis of traffic properties in a military patrol environment. In the near future, robots are expected to explore enemy grounds and measure threat, taking the place of human patrol. In order to control such robots, control messages must be extremely accurate. One mistake from the control center could cause a tragedy. Thus, high reliability must be guaranteed. Another goal is to maintain a continual flow of multimedia data sent from patrol robots. That is, QoS (Quality of Service) must be guaranteed. In order to transmit data while fulfilling both attributes, the per-path based centralized TDMA slot allocation scheme is recommended. The control center allocates slots to robots allowing synchronization among robots. Slot allocation collisions can also be avoided. The proposed scheme was verified through the ns-3 simulator. The scheme showed a higher packet delivery ratio than the algorithm in comparison. It also performed with shorter delay time in the downlink traffic transmission scenario than the algorithm in comparison.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.80-85
• /
• 2011

The mount of network traffic from the Internet is increasing because of the use of Broadband Convergence Networks(BcN). Network traffic is also increasing because of the development of application, especially multimedia traffic from IPTV, VOD, and online games. This multimedia traffic not only has a huge payload but also should be considered a threat in real time. For this reason, this study examines the ways that routers distribute the bandwidth in accordance to traffic properties. To classify the property of the traffic, it is essential to analyze the application layer. However, the general network processor architecture serially processes the L2-4 and L7 layer. We propose a novel parallel network processor architecture with a global cache that processes L2-4 and L7 in parallel. To verify the proposed architecture, we simulated both of the architecture with SystemC. EEMBC and SNORT was used to measure L2-4 and L7 processing time. When multimedia traffic was entered into the network processor in the same flow, the proposed architecture showed about 85% higher performance than general architecture.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.85-92
• /
• 2008

This study, the one concerning the evaluation analysis of the function of the wind generation using KLAM_21, has examined closely how the wind really flows on the space of the city, working with the object of case location. In the first place, the cold air formed at upper stream of Sincheon river, a ravine of whole area of Gachang gully and an inclined plane of neighboring mountainous district, flows to the north and expands itself along the upper stream of the Sincheon river, and as the time passes, it is tending upwards in the change of the volume and height as well as of the velocity and direction, of the cold air. It was learned that this phenomenon has made it clear that the spatial features of this area give rise to very good condition in generating and flowing the cold air. Meanwhile, it has been shown that in the area of park in the Ap-mountain, the generation and flow of the cold air are much interrupted because of the overpass traversing the whole area of the park of Ap-mountain, the congested area of large-scaled apartments and the urban development activities constructing the building in the park, and the volume and height of the cold air has been grown very small. In conclusion, It has been learned that for maximization of the spatial effect of the wind corridor, the areas where the cold air is generated, flowed, accumulated, and maintained, have to be connected spatially, and this spatial connection has a close relation with spatial features of the area.

• Journal of Internet Computing and Services
• /
• v.17 no.2
• /
• pp.19-28
• /
• 2016

Internet traffic has been significantly increasing due to the development of information and communication networks and the growing numbers of cell phone users that access networks. This paper connects to this issue by presenting a way to detect and analyze a typical DDoS attack that results in Internet breaches and network attacks, which are on the increase. To achieve this goal, we improve features and GUI of the existing ATMSim analysis package and use it. This package operates on a network flow-based analysis method, which means that normal traffic collected through an internal LAN at the Korean Bible University campus as well as anomaly traffic with DDoS attacks are generated. Self-similarity processes are used to analyze normal and anomaly traffic that are collected and generated from the improved ATMSim. Our numerical results obtained from three Hurst parameter estimate techniques show that there is quantitatively a significant difference between normal traffic and anomaly traffic from a self-similarity perspective.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.135-149
• /
• 2019

This article analyzed economic effects of changes in spatial accessibility on regional touruism expenditure structure resulting from highway investments on Gangwon province, Korea. The Seemingly Unrelated Regress(SUR) model is applied to analyze the structure of change in tourism expenditure of Gangwon Province, and the competition and complementary relationship of tourist demand were analyzed among 18 counties in Gangwon by Dendrinos-Sonis method. The spatial accessibility has a significant effect on the increase in amount of tourist expenditure, but by 1% increase in the accessibility resulted in a reduction of length of stay -0.18% and travel costs -0.34% by respectively. The most powerful variable for improving the on-site economy is the tourist service establishment, which increases one unit, the amount of tourist expenditure increased by 3.6%. Moreover, the competition and supplemental relationship of tourism demands in Gangwon was decided by the conditions under which traffic flow with passing occurred, such as inland or ocean-typed travel attractions, adjacent or remote regions to the highway. The limitations of this study were not able to use raw data of tourism expenditures before and after the opening the highway due to the restriction of priority data, and further research on the appropriate level of spatial accessibility for the regional economy is needed.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.181-188
• /
• 2020

Purpose : The purpose of this study is to compare the effects on abdominal muscle thickness and breathing by applying trunk strength exercise and deep stabilization exercise along with breathing exercise, which is the main respiratory muscle during breathing, to present an efficient exercise method with diaphragm breathing. Methods : This study was performed on normal 6 females and 14 males subjects. They were divided into 2 groups which trunk strength exercise and deep stabilization exercise group. The trunk strength exercise group (TSE) attended prone press-up, crunch and pelvic tiling. The deep stabilization exercise group (DSE) attended abdominal drawing, horizontal side-support and bridging exercise. Breathing exercise was performed for each set break time for 1 minute. Results : First, in the comparison of the change in the thickness of the abdominal muscle between the trunk strength training group and the deep stabilization group before and after exercise, there was a statistically significant difference in the comparison of transverse abdominis (TrA), rectus femoris (RF), external oblique (EO), internal oblique (IO) (p<.05). However, there was no significant difference in any comparison between groups (p>.05). Second, in the comparison of changes in respiratory function between the trunk strength exercise group and the deep stabilization exercise group before and after exercise, there were statistically significant differences in the exerted forced vital capacity (FVC), forced expiratory volume at one second (FEV₁), peak expiratory flow (PEF) in the comparison before and after the experiment (p<.05). However, there was no significant difference in any comparison between groups (p>.05). Conclusion : As a result of this study, it can be said that both trunk strength exercises and deep stabilization exercises along with diaphragm breathing are exercises that strengthen deep and superficial muscles, and have a positive effect on breathing function as well as muscle strength. However, it is not known which exercise was more effective, and because it was combined with breathing exercise, the interference effect appeared.