• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.779-784
• /
• 2004

In this paper, we have proposed an image contrast control method using brightness preserving on the FPD(Flat Panel Display). The proposed method can be easily applied to the FPD required real-time processing, since hardware complexity is greatly reduced using linear approximation method of CDF(Cumulative Density Function). For effective processing of the proposed algorithm, we have utilized the sample value of CDF and Barrel Shift. Visual test and standard deviation of their histogram have been introduced to evaluate the resultant output images of the pro-posed method and the original ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12A
• /
• pp.1223-1228
• /
• 2006

Closed-form expressions for capacity bounds of multiuser diversity combined with maximum ratio transmission (MRT) and maximum ratio combining (MRC) at each link are presented under the assumption of independent and quasi-static flat multiple-input multiple-output (MIMO) Rayleigh fading channels. The analysis results precisely agree with the numerical verification results and clearly show the impact of MRT/MRC on multiuser diversity.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.5
• /
• pp.1-10
• /
• 1998

A GaAs MMIC composed of VCO (voltage controlled oscillator) and mixer for PCS receiver has been developed using 1.mu.m ion implanted GaAs MESFET process. The VCO consists of a colpitts-type oscillator with a dielectric resonator and the circuit configuration of the mixer is a dual-gate type with an asymmetric combination of LO and RF FETs for the improvement of intermodulation characteristics. The common-source self-biasing is used in all circuits including a buffer amplifier and mixer, achieving a single power supply (3V) operation. The total power dissipation is 78mW. The VCO chip shows a phase noise of-99 dBc/Hz at 100KHz offset. The combined VCO/mixer chip shows a flat conversion gain of 2dB, the frequency-tuning factor of 80MHz/volts in the varacter bias ranging from 0.5V to 0.5V , and output IP3 of dBm at varactor bias of 0V. The fabricated chip size is 2.5mm X 1.4mm.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.182-184
• /
• 2009

In this letter, we derive a tight closed-form formula for an ergodic capacity of a multiple-input multiple-output (MIMO) for the application of wireless communications. The derived expression is a simple closed-form formula to determine the ergodic capacity of MIMO systems. Assuming the channels are independent and identically distributed (i.i.d.) Rayleigh flat-fading between antenna pairs, the ergodic capacity can be expressed in a closed form as the finite sum of exponential integrals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.331-340
• /
• 2009

In this paper, we propose a new power loading algorithm for orthogonalized spatial multiplexing(OSM) systems over flat-fading multiple-input multiple-output (MIMO) channels. Compared to SVD-based transmission scheme, the OSM scheme exhibits a good system performance with lower complexity and feedback overhead. To further improve the performance in OSM systems with power loading, we introduce a geometric approach on the Euclidean distance between the constellation points in the effective channel. Using this approach, we show that the optimal power loading parameters in terms of the minimum distance can be obtained. Simulation results demonstrate that our algorithm provides a 5dB gain at a bit error rate (BER) of $10^{-4}$ over that of no power loading case with both QPSK and 16-QAM. Consequently, our power loading algorithm allows us to significantly improve the system performance with one additional feedback value.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.2
• /
• pp.28-31
• /
• 2002

The Cdl-xZnxTe film was fabricated by thermal evaporation for the flat-panel X-ray detector. The stoichimetric ratio and the crystal structure of a polycrystalline Cd$_{1-x}$ Zn$_{x}$Te were investigated by EPMA and XRD, respectively. The leakage current and X-ray sensitivity of the fabricated films were measured to analyze the X-ray response characteristic of Zn in the polycrystalline CdZnTe thin film. The leakage current and the output charge density of Cd$_{0.7}$Zn$_{0.3}$Te thin film were measured to 0.37 nA/cm$^2$ and 260 pc/cm$^2$ at an applied voltage of 2.5 V/${\mu}{\textrm}{m}$, respectively. Experimental results showed that the increase of Zn doping rates in Cd$_{1-x}$ Zn$_{x}$Te detectors reduced the leakage current and improved the signal to noise ratio significantly.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1356-1362
• /
• 2015

Modular snake-like robots are robust for failure and have flexible locomotions for obstacle environment than of walking robot. This requires an adaptation capability which is obtained from a learning approach, but has not been analysed as well. In order to investigate the property of adaptation of locomotion for different terrains, NEAT controllers are trained for a flat terrain and tested for obstacle terrains. The input and output characteristics of the adaptation for the neural network controller are analyzed for different terrains in frequency domain.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.10
• /
• pp.19-26
• /
• 1997

Novel class AB CMOS second-generation current conveyors (CCII) using 0.6.mu.m n-well CMOS process for high-frequency current-mode signal processing were developed. The CCII for low power operation consists of a class AB push-pull stage for the current input, a complementary source follower for the voltage input, and a cascode current mirror for the current output. In this architecture, the two input stages are coupled by current mirrors to reduce the current input impedance. Measurements of the fabricated CCII show that the current input impedance is 875.ohm. and the bandwidth of flat gain when used as a voltage amplifier extends beyond 4MHz. The power dissipation is 1.25mW and the active chip area is 0.2*0.15[mm$\^$2/].

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.347-351
• /
• 1997

A micromachined piezoelectic cantilever transducer,which works both as a microphone and as a microspeaker,has been fabricated and tested. The 2000*2000*3.mu.m .sap2. cantilever has oxide(ZnO)piezoelectric thin film on a supporting layer of low-pressure chemical-vapor-deposited(LPCVD)low-stress siliconnitride. A highlight of the fabrication process which may also be relevant for other micromachined stuctures is the technique for producing a flat,multilayer cantilever. The measured microphone sensitivity is fairly constant at 2 mV/.mu.bar in the low frequency range and rise to 20 mV/.mu.bar at the lowest resonant frequency of 890 Hz. The 2 mV/.mu.bar sensitivity is the highest report to data for a microphone with a micromachined diaphragm. When measured into a 2 cm/sap3 coupler with 4V (zero-park)drive,the microspeaker output sound pressure level(SPL) is 75 dB at 890 Hz. It increases to approximately 100dB SPL at 4.8kHz with 6V(zero-park)drive. The measured microphone frequency response agrees well with the results of an ABAQUS simulation.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.61-64
• /
• 2001

고품질, 고속 데이터 전송을 요구하는 제 3세대 무선 통신 시스템에서는 페이딩 현상에 효과적으로 대처하기 위한 방안으로 여러 가지 다이버시티 기법이 연구되어 왔다. 특히 최근 들어 MIMO (Multiple Input Multiple Output) 시스템에 대한 관심이 고조되고 있으며, 이러한 추세에 부합하여 송수신단에 여러 개의 안테나를 사용하여 수신단의 SNR을 최대화하는 MRT (Maximum Ratio Transmission) 기법이 제안되었다. 본 논문에서는 플랫페이딩 (flat Fading) 채널에 국한된 기존의 MRT 연구 결과를 확장하여 다중 경로 페이딩 채널에 대한 MRT 기법을 유도하고 성능을 분석하였으며, 이를 검증하기 위하여 모의실험을 수행하여 다중경로 및 안테나 수에 따른 비트오율 성능을 제시하였다