• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1205-1211
• /
• 2004

This study has investigated radiation degradation of chloroprene rubber in the presence of some fire retardant. Ammonium polyphosphate, aluminium trihydroxide, magnesium hydroxide, calcium carbonate and antimony trioxide were selected as flame retardant. Samples were irradiated using a Co$^{60}$ ${\gamma}$ -ray and ray up to 2000 kGy at a dose rate of 5 kGy/hr in the presence of air atmosphere at room temperature. After irradiation, samples were assessed fire retardancy with electrical properties and mechanical properties. Some considerations concerning the effects of the fire retardants added to chloroprene rubber on the radiation and thermal stability of chloroprene rubber are presented. From fire retardancy with electrical and mechanical property measurements, it was found that addition of magnesium hydroxide resulted in maximum fire retardant effect.

• Environmental Analysis Health and Toxicology
• /
• v.22 no.2 s.57
• /
• pp.157-163
• /
• 2007

Tetrabromobisphenol A (TBBPA) is the most widely used BFR (brominated flame retardants) as a reactive flame retardant in printed circuit boards, and as additive applications in several types of polymers. The purpose of this study is to assess the adverse effects of TBBPA on the benthic amphipod (Hyalella azteca). Results on the acute toxicity of TBBPA using Hyalella azteca showed that NOEC and LOEC are 100mg/kg and 200mg/kg, respectively. In addition, when chronic toxicity of TBBPA was investigated at the concentration ranges between 0.01 to 100mg/kg, it was found that NOECs are $10mg/kg(fecundity){\sim}100mg/kg(viability)$, respectively. Significant fecundity inhibition was appeared at 100mg/kg of TBBPA, however, this concentration did not show severe adverse effect on weight increment. The values of PNEC were determined as 0.1mg/kg (fecundity) and 1mg/kg (lethal effect), respectively, using a safety factor suggested by EU and OECD.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.268-277
• /
• 2001

The MDI(4,4'-diphenyl methane diisocyanate) was mixed with PPG, PEG and trimethylolpropane(TMP) respectively to prepare polyurethane resin. The various physical properties were measured for the mixtures. The gel-time was shortened by adding of PEG and TMP The molecular weight made a greater influence on the gel-time than the number of functional groups. The NCO-OH reaction was more active and faster than the NCO-NCO reaction. The hardness was influenced by crosslinking-density and molecular structure. The NCO-OH reactions yielded the flexible films and the NCO-NCO reactions yielded the brittle films. The increase of crystallinity and shrinkage induced the low adhesion ratio but the adding of TMP induced the high adhesion ratio. The flame-retardancy was influenced by quantity and kinds of flame-retardant. IXOL B-251 was the most excellent among the flame-retardants employed in this study. TCCP was partially separated because of the lack of solubility.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.393-406
• /
• 2014

To figure out the problems of flame retardant treatment (FRT) on wooden buildings, field investigation and analysis of statistical data are performed. After FRT on historical wooden building, efflorescence and exfoliation showed most often. These problems appeared especially on column, rafter and Ga-gu (Ingredients for supporting structure of a roof) which are liberally spreaded. To compare before and after FRT, analyzed 20 elements using P-XRF. In this process, found sulfur which informs FRT. This helped set up nondestructive assay. Through this process, confirmed field application by analysis residue component of Songgwang-sa Temple.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.692-700
• /
• 2018

In this study, the results of PBDEs and HBCDs of the products and waste that contain BFRs such as domestic electronic products, automobiles and textile products were compared with international management standards, and their excess rates were calculated. Deca-BDE was detected among the PBDEs in TV rear cover plastics, car seats, automotive interior plastics, and automobile shredding residues of products and waste containing BFRs. The comparison with Basel Convention management standards (1,000 mg/kg) for PBDE-containing wastes (4 types in total) shows that the excess rate of all samples was less than 1.5%. The estimated excess rate compared to the EU and Basel convention management standards (1,000 mg/kg) for PBDEs (4 species + deca-BDE) and TV rear cover plastics was 37.5% (30 of 80 samples exceeded the standards). The estimated excess rate compared to the Basel convention management standards (1,000 mg/kg) for HBCD, building materials products and waste was 15.7% (17 of 108 samples exceeded the standards). In the case of PBDEs, it is necessary to remove only the rear cover of CRT TV among the electric and electronic products and treat it in the flame retardant treatment facility to improve the recycling collection system. In the case of HBCD, it is necessary to appropriately dispose of the recycled materials, heat insulation materials, TV plastics, and styrofoam in marine fishery among construction materials and restrict the use as recycled raw materials.

• Resources Recycling
• /
• v.16 no.4
• /
• pp.17-26
• /
• 2007

Inorganic shell powder waste was added to recycled polypropylene(COPP), and its effect on the mechanical properties and flammability was investigated. Compatibilizer(Polytail H) was added to improve mechanical properties of COPP/shell composites. Also three different flame retardants($Al_2O_3$, DBDPO, $Sb_2O_3$) were added to improve flammability. Experimental results indicated that addition of compatibilizer resulted in an improved mechanical properties, and especially impact strength approached that of 100 wt% COPP. Addition of flame retardant did not result in decreased mechanical properties. UL-94 flammability test indicated that COPP/shell composite did not show good flame retardancy, however, in the case of COPP/shell composites containing flame retardant showed good flammability. flammability was found $Sb_2O_3>Al_2O_3>DBDPO$ in this order. Finally, UL-94 V-0 grade was found in COPP/shell composite with $Al_2O_3$, compatibilizer, and 40 wt% shell, and COPP/shell composites with $Sb_2O_3$.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.346-359
• /
• 2002

The brominated flame retardants (BFRs) are one of the unregulated pollutants in Korea, which is recently highlighted the new pollutants of environmental contamination. In this study, the previous research papers related the BFRs were surveyed, and the analytical methods of BFRs were established. The results are followed; The 40 kinds of PBDEs standards were used to establish the analytical methods to perform the experiments of recoveries and detection limits in water and soil. The detection limits of PBDEs using GC/MS represented 5.0~10.0 pg/L for water and 0.5~2.0 ng/g for soil samples. The average recoveries of water samples were 89~98% with ethylacetate, n-hexane and dichloromethane, and 89~103% in combined solvent with n-hexane and acetone. In soxhlet extraction, the higher recoveries obtained the acetone:n-hexane(1:1) comparing with acetone:dichloromethane(1:1).

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.76-83
• /
• 2015

EPS sandwich panel contains flame retardants that slow down ignition during fires,reduce the amount of heat generated, and block the spread of combustion. However, if a sandwich panel does not satisfy standards for fire-retardant performance, it may increase damage to property and human life. It is difficult to test the fire-retardant performance of a finishing material with the naked eye, so it is necessary to develop convenient and fast evaluation methods that are convenient and fast. In this study, a fire safety evaluation method for EPS sandwich panel was analyzed using X-ray to detect specific components related to the fire-retardant performance X-ray fluorescence analysis (XRF) indicated that suitable panel products contained more aluminum in comparison to unsuitable products. Gibbsite was identified as the main crystalline material of flame retardant EPS through X-ray diffraction analysis (XRD) and was included in both suitable products and unsuitable products, but there was a difference in crystalline structure. This study was verifies the possibility of evaluating fire-retardant performance using ultimate analysis and crystal analysis through these X-ray methods.

• Journal of Environmental Health Sciences
• /
• v.50 no.3
• /
• pp.212-220
• /
• 2024

Background: 2-Ethylhexyl diphenyl phosphate (EHDPP) is widely used as a flame-retardant plasticizer in the production of polyvinyl chloride, adhesives, and food packaging. This chemical has been frequently detected in water, sediment, and indoor environments, and its lipophilicity raises concerns about bioaccumulation. Objectives: In this study, the effects of EHDPP on the development, behavioral changes, and growth hormone (GH) endocrine system of zebrafish larvae were investigated. Methods: Fertilized embryos were exposed to various concentrations (control, solvent control, 0.07, 0.7, 7, 70, and 700 ㎍/L) of EHDPP for 96 h. Developmental toxicity endpoints were observed daily. Behavioral changes under light-dark-light conditions and changes in hormones and genes related to GH/insulin-like growth factors (IGFs) axis were determined. Results: Significant decreases in survival, body length and moving distance were observed in zebrafish larvae exposed to 70 and 700 ㎍/L EHDPP. The concentrations of GH and IGF-1 were significantly decreased in zebrafish larvae exposed to 70 and 700 ㎍/L EHDPP. This change was well supported by changes in the transcription of genes involved in GH, IGF, IGF receptors, and IGF binding proteins. Conclusions: Our observations showed that exposure to 70 and 700 ㎍/L EHDPP could disrupt the feedback circuits of the GH/IGFs axis, ultimately leading to developmental toxicity, hypoactivity, and mortality.

• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.143-153
• /
• 2017

Herein we studied the characterization of the PBO films formed via solution casting and thermal cyclization of poly(o-hyroxyamide)s(PHAs) that were synthesized by direct polycondensation of 3,3'-dihydroxybenzidine with 4,4'-(2,3-quinoxalinedioxy) dibenzoic acid and/or 4,4'-(2,3-pyridinedioxy) dibenzoic acid. All the PHAs exhibited inherent viscosities in the range of 0.55~0.84 dL/g in DMAc solution. The copolymers, CPH-2-5, were partially soluble in less polar solvents like pyridine and THF. However, all the PBOs were not soluble in polar solvents, but only partially soluble in sulfuric acid. The temperatures corresponding to 10% weight loss of the PBOs with increasing content of quinoxalinedioxy unit were higher than those of the PHAs, and the char yields at $900^{\circ}C$ in $N_2$, tensile strength, and initial modulus of the PBOs were 1.1~1.3 times, 1.2~1.8, and 1.6~3.3 times higher, respectively, than those of the PHAs. The LOI value of CPB-2 was 38.5%, while that of CPB-1 was the highest at 40.0%. The LOI test confirmed that excellent flame retardants were synthesized.