• Journal of Microbiology and Biotechnology
• /
• v.28 no.5
• /
• pp.816-820
• /
• 2018

The stringent response (SR), which is activated by accumulation of (p)ppGpp under conditions of growth-inhibiting stresses, plays an important role on growth and virulence in Vibrio cholerae. Herein, we carried out a genome-wide screen using transposon random mutagenesis to identify genes controlled by SR in a (p)ppGpp-overproducing mutant strain. One of the identified SR target genes was flaC encoding flagellin. Genetic studies using flaC and SR mutants demonstrated that FlaC was involved in bacterial growth, toxin production, and normal flagellum function under conditions of high (p)ppGpp levels, suggesting FlaC plays an important role in SR-induced pathogenicity in V. cholerae.

• Parasites, Hosts and Diseases
• /
• v.61 no.4
• /
• pp.449-454
• /
• 2023

Free-living amoebae (FLA) rarely cause human infections but can invoke fatal infections in the central nervous system (CNS). No consensus treatment has been established for FLA infections of the CNS, emphasizing the urgent need to discover or develop safe and effective drugs. Flavonoids, natural compounds from plants and plant-derived products, are known to have antiprotozoan activities against several pathogenic protozoa parasites. The anti-FLA activity of flavonoids has also been proposed, while their antiamoebic activity for FLA needs to be emperically determined. We herein evaluated the antiamoebic activities of 18 flavonoids against Naegleria fowleri and Acanthamoeba species which included A. castellanii and A. polyphaga. These flavonoids showed different profiles of antiamoebic activity against N. fowleri and Acanthamoeba species. Demethoxycurcumin, kaempferol, resveratrol, and silybin (A+B) showed in vitro antiamoebic activity against both N. fowleri and Acanthamoeba species. Apigenin, costunolide, (-)-epicatechin, (-)-epigallocatechin, rosmarinic acid, and (-)-trans-caryophyllene showed selective antiamoebic activity for Acanthamoeba species. Luteolin was more effective for N. fowleri. However, afzelin, berberine, (±)-catechin, chelerythrine, genistein, (+)-pinostrobin, and quercetin did not exhibit antiamoebic activity against the amoeba species. They neither showed selective antiamoebic activity with significant cytotoxicity to C6 glial cells. Our results provide a basis for the anti-FLA activity of flavonoids, which can be applied to develope alternative or supplemental therapeutic agents for FLA infections of the CNS.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.315-321
• /
• 2004

The void evolution in direct bonding process of $Si/Si_3$$N_4$ ∥ $SiO_2$/Si silicon wafer pairs has been investigated with an infrared camera. The voids that formed in the premating process grew in the conventional furnace annealing process at a temperature of $600^{\circ}C$. The voids are never shrunken even with the additional annealing process at the higher temperatures. We observed that the voids became smaller and disappeared with sequential scanning by our newly proposed fast linear annealing(FLA). FLA irradiates the focused line-shape halogen light on the surface while wafer moves from one edge to the other. We also propose the void shrinking mechanism in FLA with the finite differential method (FDM). Our results imply that we may eliminate the voids and enhance the yield for the direct bonding of wafer pairs by employing FLA.

• Korean Journal of Materials Research
• /
• v.12 no.10
• /
• pp.820-824
• /
• 2002

It is of importance to know that the bonding strength and interfacial stress of SOI wafer pairs to meet with mechanical and thermal stresses during process. We fabricated Si/2000$\AA$-SiO$_2$ ∥ 2000$\AA$-SiO$_2$/Si SOI wafer pairs with electric furnace annealing, rapid thermal annealing (RTA), and fast linear annealing (FLA), respectively, by varying the annealing temperatures at a given annealing process. Bonding strength and interfacial stress were measured by a razor blade crack opening method and a laser curvature characterization method, respectively. All the annealing process induced the tensile thermal stresses. Electrical furnace annealing achieved the maximum bonding strength at $1000^{\circ}C$-2 hr anneal, while it produced constant thermal tensile stress by $1000^{\circ}C$. RTA showed very small bonding strength due to premating failure during annealing. FLA showed enough bonding strength at $500^{\circ}C$, however large thermal tensile stress were induced. We confirmed that premated wafer pairs should have appropriate compressive interfacial stress to compensate the thermal tensile stress during a given annealing process.

• Korean Journal of Veterinary Research
• /
• v.54 no.1
• /
• pp.39-48
• /
• 2014

The prevalence of thermophilic Campylobacter (C.) spp. in stray, breeding, and household dogs was 25.2, 12.0, and 8.8%, respectively. C. jejuni and C. upsaliensis were the predominant Campylobacter spp. from household dogs. cdtA, cdtB, and cdtC were detected by PCR in all isolates. Despite the high cytolethal distending toxin (CDT) gene prevalence, only 26 (31%) C. jejuni strains and one (15.3%) C. coli strain showed evidence of CDT production in HEp-2 cell cytotoxicity assays. Virulence-associated genes detected in the C. jejuni and C. coli isolates were cadF, dnaJ, flaA, racR, ciaB, iamA, pldA, virB11, ceuE, and docC. cadF, dnaJ, flaA, and ceuE were found in all C. jejuni and C. coli isolates. When detecting Guillain-Barr$\acute{e}$ syndrome-associated genes (galE, cgtB, and wlaN), galE was identified in all isolates. However, cgtB and wlaN were more prevalent in C. jejuni isolates from humans than those from dogs. Adherence and invasion abilities of the C. jejuni and C. coli strains were tested in INT-407 cells. A considerable correlation (adjusted $R^2$= 0.678) existed between adherence and invasion activities of the Campylobacter spp. isolates.

• Archives of Plastic Surgery
• /
• v.50 no.1
• /
• pp.42-48
• /
• 2023

Background The temporalis muscle flap transfer with fascia lata augmentation (FLA) is a promising method for smile reconstruction after facial palsy. International literature lacks a detailed anatomical analysis of the temporalis muscle (TPM) combined with fascia lata (FL) augmentation. This study aims to describe the muscle's properties and calculate the length of FL needed to perform the temporalis muscle flap transfer with FLA. Methods Twenty nonembalmed male (m) and female (f) hemifacial cadavers were dissected to investigate the temporalis muscle's anatomy. Results The calculated minimum length of FL needed is 7.03cm (f) and 5.99cm (m). The length of the harvested tendon is 3.16cm/± 1.32cm (f) and 3.18/± 0.73cm (m). The length of the anterior part of the temporalis muscle (aTPM) is 4.16/± 0.80cm (f) and 5.30/± 0.85cm (m). The length of the posterior part (pTPM) is 5.24/± 1.51cm (f) and 6.62/± 1.03cm (m). The length from the most anterior to the most posterior point (aTPMpTPM) is 8.60/± 0.98cm (f) and 10.18/± 0.79cm (m). The length from the most cranial point to the distal tendon (cTPMdT) is 7.90/± 0.43cm (f) and 9.79/± 1.11cm (m). Conclusions This study gives basic information about the temporalis muscle and its anatomy to support existing and future surgical procedures in their performance. The recommended minimum length of FL to perform a temporalis muscle transfer with FLA is 7.03cm for female and 5.99cm for male, and minimum width of 3 cm. We recommend harvesting some extra centimeters to allow adjusting afterward.

• Journal of Environmental Science International
• /
• v.15 no.5
• /
• pp.397-403
• /
• 2006

Compositional characteristics and origin of polycyclic aromatic hydrocarbons(PAHs), which should be strongly regulated for environmental protection in the crude oils and petroleum products, have been investigated by gas chromatography-mass spectrometry(GC/MS). In the crude oils analyzed, two-rings compound(naphthalene) of PAHs was detected around $72.3\sim93.5%$, but five- or six-rings compound of PAHs was not detected. In the crude oils analyzed, the molecular ratio indices of Phe/Ant(phenanthrene/anthracene)>15, Fla/Pyr(fluoranthene/pyrene)<1, BaA/Chr(benzo (a)anthracene/chrysene)$\leq0.4$ could be effectively applied, and we found that the origin of PAHs was petrogenic sources. Total PAHs concentrations in the crude oils were increased with increasing API gravity and with decreasing sulfur contents of the analyzed crude oils. Five- or six-rings compound of PAHs were not included in ail petroleum products except bunker-C. Furthermore, the molecular ratio indices of Phe/Ant(phenanthrene/anthracene) vs. Fla/Pyr(fluoranthene/pyrene) could be effectively applied as the standard for the PAHs contamination criterion at the other Korean areas.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.301-307
• /
• 2002

Direct bonded SOI wafer pairs with $Si ll SiO_2/Si_3N_4 ll Si$ the heterogeneous insulating layers of SiO$_2$-Si$_3$N$_4$are able to apply to the micropumps and MEMS applications. Direct bonding should be executed at low temperature to avoid the warpage of the wafer pairs and inter-diffusion of materials at the interface. 10 cm diameter 2000 ${\AA}-SiO_2/Si(100}$ and 560 $\AA$- ${\AA}-Si_3N_4/Si(100}$ wafers were prepared, and wet cleaned to activate the surface as hydrophilic and hydrophobic states, respectively. Cleaned wafers were pre- mated with facing the mirror planes by a specially designed aligner in class-100 clean room immediately. We employed a heat treatment equipment so called fast linear annealing(FLA) with a halogen lamp to enhance the bonding of pre mated wafers We kept the scan velocity of 0.08 mm/sec, which implied bonding process time of 125 sec/wafer pairs, by varying the heat input at the range of 320~550 W. We measured the bonding area by using the infrared camera and the bonding strength by the razor blade clack opening method, respective1y. It was confirmed that the bonding area was between 80% and to 95% as FLA heat input increased. The bonding strength became the equal of $1000^{\circ}C$ heat treated $Si ll SiO_2/Si_3N_4 ll Si$ pair by an electric furnace. Bonding strength increased to 2500 mJ/$\textrm{m}^2$as heat input increased, which is identical value of annealing at $1000^{\circ}C$-2 hr with an electric furnace. Our results implies that we obtained the enough bonding strength using the FLA, in less process time of 125 seconds and at lowed annealing temperature of $400^{\circ}C$, comparing with the conventional electric furnace annealing.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1134-1139
• /
• 2002

Campylobacter, Arcobacter, and Helicobacter, classified into the same rRNA superfamily VI by taxonomy, cause food-borne diseases, stomach ulcer, and gastric cancer. To detect each strain selectively from contaminated foods, PCR, multiplex-PCR, and restricion fragment length polymorphism (RFLP) were applied on Campylobacter, Arcobacter, and Helicobacter. The same PCR products could be detected using CHA primer targeted for 16S rRNA of Campylobacter, Arcobacter, and Helicobacter. To detect C. jejuni and C. coli from A. butzleri and H. pylori, pg50/pg3 primer targeted for fla A gene was used, and for A. butzleri, Arco2/Butz primer targeted for 23S rRNA was utilized. For H. pylori detection, icd1/icd2 primer targeted for isocitrate dehydrogenase gene was employed, and JEJ1/JEJ2 primer targeted for ceuE gene was effective for C. jejuni detection from the three strains. C. jejuni, C. coli could be separated from A. butzleri and H. pylori through PCR-RFLP using restriction enzyme Dde I. Such primers would be effective for detecting each strain selectively through PCR when C. jejuni, C. coli, A butzleri and H. pylori are contaminated together.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.93-103
• /
• 2000

The concrete plug in an underground cavern prevents the stored product (oil, gas, etc) from leaking and the excessive show of underground water, so it plays an important role in construction and operation of the storage cavern. Additionally, it should maintain its stability under every possible loading condition. Once the plug is constructed, the cavern is isolated from the external access. Therefore, mechanical and hydraulic consideration should be made in construction to fulfill its function. Therefore, in this study, numerical analyses were conducted to study the optimal shape and thickness of the plug with respect to the various conditions of installation depth, the shape of the plug, in-situ stress ratio (K), the condition of rock-plug interface, and the effect of Excavation Damaged Zone (EDZ). This paper also presents the effect of slot depth on the hydraulic behavior of the plug. These analyses were carried out by using the 2-dimensional finite difference code, rm FLAC, and the 3D code, m FLA $C^{3D}$./.