• 한국의류학회지
• /
• 제25권4호
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• 한국의류학회지
• /
• 제31권3호
• /
• pp.463-474
• /
• 2007

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

• 패션비즈니스
• /
• 제17권2호
• /
• pp.63-81
• /
• 2013

A Study using compare and analyze about differences among three patterns(shape and size of pattern, fitting and amount of air gap and so on) through 3D simulation. This study use 3D simulation program, DC Suite version 3.0. The results are as a follows: The results of estimation about total appearance, the pattern of Bunka is best of all pattern about total fitting and silhouette of front and back side. The pattern of armstrong and on&on stand low in estimation. As the total fitting, the pattern of Bunka is 4.40, the pattern of Armstrong is 2.60 and the pattern of On&on is 1.60. The result show better pattern of Bunka than pattern of Armstrong and On&on. When we examine about space between body and cloth, the pattern of Bunka is best. The pattern of Armstrong don't have problems about back side but front side have some problem of getting loose. Because it only have a waist dart so dart size is too big. The pattern of On&on have so much space because it don't have a waist dart. On the amount of air gap, the pattern of Bunka squash up body so it have the amount of air gap 0.08 at bust circumference and underbust circumference. Next is the pattern of Armstrong, amount of air gap is 0.14 at bust circumference and 0.23 at underbust circumference. The pattern of On&on's amount of air gap is 0.30 at bust circumference and 0.37 at underbust circumference. So the pattern of Bunka is bodice block of the best closing adhesion and the On&on is a loose-fitting pattern.

• 한국융합학회논문지
• /
• 제12권2호
• /
• pp.147-154
• /
• 2021

이 연구는 가상 피팅 서비스에서 제공하는 피팅창 구조와 인터페이스 디자인에 관한 것으로 현재 시장에서 유통 중인 유관 서비스 사례를 분석하고 FGI를 통해 서비스에 대한 사용자의 니즈를 파악하였다. 연구의 결과로 기존 웹페이지에서 피팅창을 찾을 때 아이콘의 크기가 작고 가시성이 낮은 문제는 사이트 접속과 동시에 피팅창이 열리게 하였고, 피팅맵을 초기 사용자도 잘 이해 할 수 있게 정보 전달 관련 문제를 해소하였다. 또한 사용자 성향에 필요한 항목을 제공하여 정확하고 쉽게 서비스를 사용할 수 있도록 디자인 하였다. 본 연구의 결과는 이어지는 가상 피팅 서비스 연구의 기초 자료로 활용되고 관련 산업에 종사하는 마케터에게 좋은 시사점을 제공할 것으로 기대한다.

• 한국산업정보학회논문지
• /
• 제19권4호
• /
• pp.41-52
• /
• 2014

본 논문은 O링의 치수 측정에 있어 고가의 대 중형 머신비전 장비를 대체할 수 있는 소형 머신 비전 검사 장비에 기반한 O링 부품 내 외경 측정 알고리즘을 제안한다. 백라이트 조명하에 하나의 CCD 카메라를 이용하여 측정 평면으로 부터 영상을 획득하는 소형 머신 비전 검사장비에 의해 획득된 영상을 제안한 영상처리 기법 알고리즘을 이용하여 O링의 외경 및 내경치수를 측정한다. 치수 측정의 정확도를 높이기 위해 렌즈계 왜곡 보정과 원근 왜곡 보정을 소프트웨어적 기법으로 보정 하였고 O링 형상을 고려하여 타원정합 모델을 적용하였으며 보다 타원 정합의 신뢰성을 높이기 위해 RANSAC알고리즘을 적용하였다.

• 산업공학
• /
• 제17권1호
• /
• pp.1-12
• /
• 2004

In a modern semiconductor device manufacturing industry, statistical bin limits on wafer level test bin data are used for minimizing value added to defective product as well as protecting end customers from potential quality and reliability excursion. Most wafer level test bin data show skewed distributions. By Monte Carlo simulation, this paper evaluates methods and sample size effect regarding determination of statistical bin limits. In the simulation, it is assumed that wafer level test bin data follow the Poisson distribution. Hence, typical shapes of the data distribution can be specified in terms of the distribution's parameter. This study examines three different methods; 1) percentile based methodology; 2) data transformation; and 3) Poisson model fitting. The mean square error is adopted as a performance measure for each simulation scenario. Then, a case study is presented. Results show that the percentile and transformation based methods give more stable statistical bin limits associated with the real dataset. However, with highly skewed distributions, the transformation based method should be used with caution in determining statistical bin limits. When the data are well fitted to a certain probability distribution, the model fitting approach can be used in the determination. As for the sample size effect, the mean square error seems to reduce exponentially according to the sample size.

• 한국의류학회지
• /
• 제26권6호
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• Human Ecology Research
• /
• 제55권5호
• /
• pp.555-566
• /
• 2017

This study analyzes the practical tasks and required competency for technical designers to provide basic data on the training of domestic technical designers. The survey was applied to 21 technical designers of big vendors as well as investigated tasks, task flow, important tasks, time-consuming tasks, and required competencies. The results of the study are as follows. First, the technical designers were in charge of several brands of buyers and distributors of fashion companies, or several lines of the same brand. The main production items were cut and sewn knits. Second, the flow of task and tasks were in the order of buyer comments analysis, sloper decision to matching style, sewing specification, productive sewing method research, size specification suggestion, pattern correction comments, construction decision to matching style & fabric, sample evaluations, fit approval, business e-mail writing, specification & grading confirmation, and communication with buyer. Third, five tasks (analysis of buyer comments analysis, communication with buyer, pattern correction comments, productive sewing methods research, sample evaluation) were important and time-consuming tasks. Fourth, reeducation was required in order of sewing, pattern, English, fabric, and fitting. Fifth, competencies to be a technical designers were fitting, pattern correction, size specification & grading, construction & sewing specification, sewing terms & techniques, and communication skills. In conclusion, technical designer training should focus on technology-based instruction, such as sample evaluation, fitting, pattern correction, and productive sewing methods research of cut and sewn knits.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권3호
• /
• pp.103-114
• /
• 2002

불포화토양내 물의 흐름과 유기오염물질의 이동현상을 예측하기 위해서는 불포화토양의 토양수분곡선을 구하는 것이 필수적이다. 입자크기분포로부터 토양수분곡선을 직접 구하는 물리경험적 방법이 많은 연구자들에 의해 제안되고 적용되어왔다. 이 방법은 공극크기분포가 직접적으로 입자크기분포와 상호 연관되어있다는 개념을 이용한 것으로, 입자크기분포곡선을 산정하는 방법이 토양수분곡선추정에 영향을 미칠 수 있다는 것을 의미한다. 본 연구에서는 Arya-Paris 모형을 이용한 토양수분곡선 추정이 어떠한 입자크기분포모형을 선택하는가에 따라 영향을 받는지를 알아보고자 하였다. 1∼4의 추정변수를 갖는 4개의 입자분포곡선 모형을 사용한 결과 단지 1개의 추정변수를 갖는 Jaky모형이 더 많은 추정변수를 가진 모형보다 토양수분곡선을 잘 예측하였다. Jaky모형의 우월한 예측력은 아마도 현장토양이 가지는 구조적 특성 때문인 것으로 사료된다.

• 패션비즈니스
• /
• 제20권4호
• /
• pp.153-171
• /
• 2016

With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.