DOI QR코드

DOI QR Code

A Study of 3D Virtual Fitting Model of Men's Lower Bodies in Forties by Morphing Technique.

모핑 기법을 활용한 40대 남성 하반신 가상모델 생성에 관한 연구

  • Park, Sun-Mi (Dept. of Clothing & Textiles, Seoul National University) ;
  • Nam, Yun-Ja (Dept. of Clothing & Textiles, Seoul National University) ;
  • Choi, Kueng-Mi (Dept. of Fashion Design, Dong-Seoul College)
  • 박선미 (서울대학교 생활과학대학 의류학과) ;
  • 남윤자 (서울대학교 생활과학대학 의류학과) ;
  • 최경미 (동서울대학 패션디자인과)
  • Published : 2007.03.31

Abstract

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

Keywords

References

  1. 강득찬. (2002). 인터넷을 기반으로 한 가상현질 환경에서의 3차원 인체 구현. 창원대학교 대학원 석사학위 논문
  2. 권오현. (2001). 3차원 전신 측정기를 이용한 신체치수의 자동추출 및 웹 모델링. 영남대학교 대학원 석사학위 논문
  3. 김혜수. (2001). 개별주문 생산 실태와 수정 패턴의 착의 평가-중년 비만 남성 정장 상의를 중심으로-. 가톨릭대학교 석사학위 논문
  4. 김혜수. (2004). 3차원 추정에 의한 한국 성인 남녀의 머리 형태 분석. 가톨릭대학교 대학원 박사학위 논문
  5. 박진순. (2001). 인터넷 가상피팅모델 개발을 위한 감성체형 연구. 연세대학교 대학원 석사학위 논문
  6. 신규하. (2001). 인체 모델 변형을 이용한 3차원 아바타 캐릭터시스템 개발. 한신대학교 대학원 석사학위 논문
  7. 신승철. (2001). 패션코디를 위한 개인 체형에 의복 3D 모델의 정합. 명지대학교 대학원 석사학위 논문
  8. 이강일. (2006). 계층형 구조의 3D 인체 모델링 모듈 개발. 원광대학교 대학원 석사학위 논문
  9. 이상철, 손권, 김성진. (2002). 한국인 인체 모델의 개발과 적용. 대한인간공학회지 21(2), 13-23
  10. 조준우. (2003). 인체 모델링을 위한 단면 곡선 및 곡면에 대한 연구. 영남대학교 대학원 석사학위 논문
  11. 최우혁. (2001). 의복 3D모델의 자동 생정과 3D 드래핑. 명지대학교 대학원 석사학위 논문
  12. 최현영. (2001). 인터넷 의류 마케팅을 위한 인체피팅모델 개발 방안에 관한 연구. 연세대학교 대학원 석사학위 논문
  13. Au, C. K. & Yuen, M. M. F. (1999). Feature-based reverse engineering of mannequin for garment design. Computer-Aided Design, 31, 751-759 https://doi.org/10.1016/S0010-4485(99)00068-8
  14. Ben Azouz, Z., Rioux, M., Shu, C., & Lepage, R. (2004). Analysis of human shape variation using volumetric techniques. Computer Animation and Social Agents, NRC 47147
  15. Dekker, L., Douros, I., Buxton, B. F., & Treleaven, P. (1999). Building symbolic information for 3D human body modeling form range data. Proceeding of the IEEE Computer Society, 388-397
  16. Jones, P., Li, P., Brooke, W. K., & West, G. M. (1995). Format for human body modelling form 3-D body scanning. International Journal of Clothing Science and Technology, 7(1), 7-16 https://doi.org/10.1108/09556229510080675
  17. Seo, H. & Magnenat-Thalmann, N. (2003). An automatic modeling of human bodices from sizing parameters. Proceedings of the ACM SIGGRAPH symposium on Interactive 3D Graphics 2003, Monterey, USA, 19-20, 234
  18. Wang, C. C. L., Wang, Y., & Yuen, M. M. F. (2005). Design automation for customized apparel products. Computer-Aided Design, 37, 675-691 https://doi.org/10.1016/j.cad.2004.08.007

Cited by

  1. Multi‐purpose three‐dimensional body form vol.23, pp.1, 2011, https://doi.org/10.1108/09556221111096705
  2. Size Specifications of Females Aged between 7 and 18 for 3D Body Model Development vol.15, pp.2, 2013, https://doi.org/10.5805/SFTI.2013.15.2.247
  3. Analysis of Utilization of Virtual Try on Simulation and Consumers' Preference in Apparel Online Shopping vol.14, pp.1, 2012, https://doi.org/10.5805/KSCI.2012.14.1.083
  4. Engineering design process of tight-fit sportswear using 3D information of dermatomes and skin deformation in dynamic posture vol.21, pp.3, 2012, https://doi.org/10.5934/KJHE.2012.21.2.551
  5. Developing Size Specifications of 3D Body Models for Males Aged between 7 and 18 vol.605-607, pp.1662-8985, 2012, https://doi.org/10.4028/www.scientific.net/AMR.605-607.156