• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.46-55
• /
• 2006

A robust motion controller based on self-organizing fuzzy control(SOFC) and feed-back tracking control technique is proposed for a two-wheel driven mobile robot. The feed-back control technique of the controller guarantees the robot follows a desired trajectory. The SOFC technique of the controller deals with unmodelled dynamics of the vehicle and uncertainties. The computer simulations are carried out to verify the tracking ability of the proposed controller with various driving situations. The results of the simulations reveal the effectiveness and stability of the proposed controller to compensate the unmodelled dynamics and uncertainties.

• 융합신호처리학회논문지
• /
• 제19권4호
• /
• pp.162-166
• /
• 2018

자동공급조절기를 사용하는 기업체에서는 대량 생산을 위해 여러 대의 피더를 근접해서 사용하고 있다. 이런 경우, 피더를 독립적으로 사용할 때와 달리, 비동기화로 인한 공진현상이 발생하여 이송품이 서로 부딪히거나 한쪽으로 쏠려서, 다음 프로세스로 운송되지 못하게 된다. 불안정한 공진현상이 일어날 때마다, 작업자는 각각의 피드컨트롤러의 값을 다시 설정하여야 한다. 본 논문에서는 이러한 문제를 해결하기 위해 피드를 여러 대 사용하는 자동공급조절기에 적합한 동기화 알고리즘을 제안하고, 성능 개선을 확인하고자 한다.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.364-370
• /
• 2005

The active magnetic bearing (AMB) systems mounted in moving vehicles are exposed to the disturbances due to the base motion, often leading to malfunction or damage as well as inaccurate positioning of the systems. Thus, in the controller design of such AMB systems, robustness to base disturbances becomes an essential requirement. In this study, effective control schemes are proposed for the homo-polar AMB system, which uses permanent magnets for generation of bias magnetic flux, when it is subject to base motion, and its control performance is experimentally evaluated. The base motion of AMB system is modeled as the dynamic disturbances in the gravity and base excitation forces. To effectively compensate for the disturbances, the angle feed-forward controller based on the inverse dynamic model and the acceleration feed-forward controller based on the normalized filtered-X LMS algorithm are proposed. The performance test of the prototype AMB system is carried out, when the system is mounted on rate table. The experimental results show that the performance of the proposed controllers for the AMB system is satisfactory in compensating for the disturbances due to the base motion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.486-489
• /
• 2004

The active magnetic bearing (AMB) systems mounted in moving vehicles are exposed to the disturbances due to the base motion, often leading to malfunction or damage as well as inaccurate positioning of the systems. Thus, in the controller design of such AMB systems, robustness to base disturbances becomes an essential requirement. In this study, effective control schemes are proposed for the homo-polar AMB system, which uses permanent magnets for generation of bias magnetic flux, when it is subject to base motion, and its control performance is experimentally evaluated. The base motion of AMB system is modeled as the dynamic disturbances in the gravity and base excitation forces. To effectively compensate for the disturbances, the angle feed-forward controller based on the inverse dynamic model and the acceleration feed-forward controller based on the normalized filtered-X LMS algorithm are proposed. The performance test of the prototype AMB system is carried out, when the system is mounted on rate table. The experimental results show that the performance of the proposed controllers for the AMB system is satisfactory in compensating for the disturbances due to the base motion.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.1047-1056
• /
• 2014

In most grid-connected inverters (GCI) with an LCL filter, since the design of both the LCL filter and the controller is done separately, considerable tuning efforts have to be exerted when compared to inverters using an L filter. Consequently, an integrated co-design of the filter and the controller for an LCL-type GCI is proposed in this paper. The control strategy includes only a PI current controller and a proportional grid voltage feed-forward controller. The capacitor is removed from the LCL filer and the design procedure starts from an L-type GCI with a PI current controller. After the PI controller has been settled, the capacitor is added back to the filter. Hence, it introduces a resonance frequency, which is identified based on the crossover frequencies to accommodate the preset PI controller. Using the proposed co-design method, harmonic standards are satisfied and other practical constraints are met. Furthermore, the grid voltage feed-forward control can bring an inherent damping characteristic. In such a way, the good control performance offered by the original L-type GCI and the sharp harmonic attenuation offered by the latter designed LCL filter can be well integrated. Moreover, only the grid current and grid voltage are sensed. Simulation and experimental results verify the feasibility of the proposed design methodology.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.219-224
• /
• 2002

There are two important variables in machining process control, which are feed and cutting speed. In this work, a two degree-of-freedom controller is designed and implemented to achieve on-line cutting force control based on the modelling of cutting process dynamics which are established through step response test. Two schemes are proposed and implemented. The first is feed control under the constant spindle speed and spindle speed control under the constant fled speed. The second is a simultaneous control of feed and spindle speed. Those are confirmed to work properly. Especially the latter shows a faster response and we'll be evaluated to pare away workpiece by simultaneous control of position and cutting farce sooner or later.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.66-69
• /
• 2008

In this paper, The author present a load current feed-forward compensator by method that improve voltage controller of Step-down Chopper to get stable output voltage to sudden change of load current. To confirm the characteristicsof a presented load current feed -forward compensator compared each transfer function of whole system that load current feed-forward compensator is added with transfer function of whole system that existent voltage controller is included using Mason gains formula in Root locus and Bode diagram. As a result the pole of system is improved, extreme point of the wave and system improves, and size of peak value and phase margin of break frequency in resonance frequency confirmed that is good. Therefore, presented control technique could confirm that reduce influence by perturbation and improves stationary state and dynamic characteristics in output of Step-down Chopper.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1663-1672
• /
• 2010

The boiler feed-water pump controllers which can be applied to 500MW class coal fired power plants was developed. The validity of the developed controllers was shown via the applied test result in a power plant. It is expected that the developed controllers are used to retrofit the existing controllers that have surpassed their expected service life and have limited spare parts, and contributes to the stable operation of plants. Based on the collected data and analysis, new control schemes were developed and implemented during the overhaul period in the new control systems. During normal operation, feed water could be supplied to the boiler with the capability of the 1600t/h flow without any problems in automatic mode of controllers. In this study, the feed-water pump controllers were developed successfully. In addition, it is expected that the developed controllers can make the plant operation more stable and can be applied to a lot of power plants.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.39-47
• /
• 2014

본 연구에서는, 자동으로 조작되는 밸브의 제어기로 사용되는 유압모션 제어기의 한계점인 설정치 추종성능과 외란 억제성능을 개선하기 위한 방법으로 기존의 PID 제어기에 피드-포워드 제어기를 추가한 2자유도(DOF) PID 제어기를 이용하였다. 이 제어기의 제어인자(Parameter)를 최적화시키는 도구로 실수코딩 유전알고리즘(Real Coded Genetic Algorithm, RCGA)을 이용하고 시뮬레이션을 통해 제어기의 성능을 검증하였다.

• 한국전자통신학회논문지
• /
• 제7권4호
• /
• pp.839-848
• /
• 2012

본 논문에서는 외란토크를 효과적으로 억제할 수 있는 AC 서보모터의 견실제어 방법을 제안한다. 제안된 제어기는 플랜트 모델에 기초한 피드포워드제어기와 안정화 피드백제어기로 구성된다. 피드포워드제어기는 공칭(nominal) 플랜트의 출력이 기준 속도명령을 정확히 추적하도록 설계되며 피드백제어기는 전체 폐루프시스템을 안정화시키는 역할을 한다. 피드백제어기는 임의로 선택될 수 있는 자유함수를 포함하는데 이 자유함수는 외란토크의 영향을 억제하고 제어기가 모델오차에 견실하게(robust) 동작되도록 선택될 수 있다. 컴퓨터 시뮬레이션을 통하여 제안된 제어방식이 기존의 제어방식들에 비해 우수한 제어성능을 가짐을 입증한다.